TIAKI Vacuum Seal Pet Feed Container Manual
Keep your pet's food fresh with this vacuum-sealed container.
Product Overview
The TIAKI Vacuum Seal Pet Feed Container is designed to preserve the freshness of pet food by removing air and creating a vacuum seal. It is available in two capacities: 7.5L and 13L.
The container features an LED display for status indication and simple button controls for operation.
LED Display and Indicators
The device features a central LED display and indicator lights to show its operational status:
Control Panel Layout:
The control panel includes the following elements:
- ON Button: Used to turn on the device and initiate air extraction.
- OFF Button: Used to turn off the device and initiate air introduction.
- UP/DOWN Buttons: (Functionality not detailed in basic operation, likely for advanced settings).
- Central Display: Shows current pressure in kPa and a numerical value (e.g., timer or setting).
- USB Port: Located on the device for charging.
- Battery Indicator: Displays the battery status.
Indicator Light Meanings:
- Air Extraction: White lights illuminate when air is being extracted and the pressure is decreasing.
- Air Introduction: White lights illuminate when air is being introduced and the pressure is increasing.
- Charging: A red light indicates the device is charging.
- Charged: A white light indicates the device is fully charged.
- Low Battery: A flickering red light indicates a low battery level.
Operating Instructions
Air Extraction:
- Long press the ON button for 2 seconds to start the air extraction process.
- The air extraction cycle lasts for 1 minute.
- To stop air extraction at any time, short press the ON button.
- Leak Detection: If a leak is detected (e.g., a loose lid), the air extraction will automatically stop within 2 minutes, and the air extraction indicator will turn off.
Air Introduction:
- Long press the OFF button for 2 seconds to introduce air back into the container.
- The air introduction process lasts for 30 seconds.
- To stop air introduction at any time, short press the OFF button. The air introduction indicator will then disappear.
Maintenance and Care
To ensure optimal performance and longevity, always ensure the lid is properly sealed to prevent leaks. Keep the device clean according to general product care guidelines.
Always ensure the lid is securely closed to maintain the vacuum seal.
Troubleshooting
The primary troubleshooting concern mentioned is related to leaks. If the container fails to maintain a vacuum, check that the lid is properly sealed and that there are no obstructions or damage to the sealing mechanism or the container rim.
