Krüger&Matz Passive Speakers
Models: KM0502C, KM0504C, KM0506C
Safety Instructions
- Place the product on a flat, dry, and stable surface.
- Ensure the device is in a well-ventilated area.
- Protect from moisture, liquids, extreme temperatures, direct sunlight, and heat sources.
- Keep out of reach of children.
- For indoor use only.
- Do not use if the speaker cable is damaged.
- Route speaker cables to prevent pinching or damage from objects.
- Do not attempt self-repair; contact authorized service for issues.
- Clean with a soft, slightly damp cloth; avoid abrasives or chemicals.
- Do not exceed the maximum input power.
Speaker Installation
Acoustic quality depends on speaker units, room size, and installation method. Follow these guidelines:
- Placing speakers directly on the floor may result in overly dominant bass; use a support plate (e.g., cement board).
- Avoid placing the speaker and sound source/amplifier on the same support to prevent sound distortion.
- If walls or glass doors are close to the speakers, use heavy curtains to minimize resonance and reverberation.
- These speakers have an antimagnetic design, generally safe for CRT televisions. However, if image quality is affected, move speakers further from the TV.
Connection
Ensure the amplifier is powered off before connecting.
Banana Plugs
Use banana plug cables to connect the system.
Speaker Cables
Connect speaker cables to the amplifier and speakers. Connect the left channel to the 'L' terminal and the right channel to the 'R' terminal. Ensure correct polarity (+/-) to avoid distortion or damage.
- Strip cable insulation and twist wires to prevent short circuits.
- Unscrew the terminal counter-clockwise, insert the wire end into the hole.
- Screw the terminal clockwise and gently pull the cable to ensure a firm connection.
- Caution: Ensure the bare metal wires do not touch each other.
Technical Specifications
CENTRAL Speakers:
| Model | KM0502C | KM0504C | KM0506C |
|---|---|---|---|
| Speaker Size | 2x 3", 1x 1" | 2x 5", 1x 1" | 2x 5", 1x 1" |
| Frequency Response | 150 Hz - 20 kHz | 70 Hz - 20 kHz | 70 Hz - 20 kHz |
| Sensitivity | 87 dB | 88 dB | 89 dB |
| Impedance | 6 Ω | 6 Ω | 6 Ω |
| Max. Power | 30 W | 60 W | 60 W |
REAR Speakers:
| Model | KM0502C | KM0504C | KM0506C |
|---|---|---|---|
| Speaker Size | 1x 3", 1x 1" | 1x 5", 1x 1" | 1x 5", 1x 1" |
| Frequency Response | 150 Hz - 20 kHz | 70 Hz - 20 kHz | 70 Hz - 20 kHz |
| Sensitivity | 86 dB | 87 dB | 88 dB |
| Impedance | 6 Ω | 6 Ω | 6 Ω |
| Max. Power | 20 W | 45 W | 45 W |
Correct Disposal of Product (Waste Electrical & Electronic Equipment)
The marking on the product or its literature indicates it should not be disposed of with household waste at the end of its life. To prevent harm to the environment or human health from uncontrolled waste disposal, please separate this product from other waste types and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact their retailer or local government office for details on where and how to recycle this item safely. Business users should contact their supplier and check purchase contract terms. Do not mix with other commercial waste.
Manufactured in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k.