PLANET IFGS-1022TF Industrial Ethernet Switch User Manual
1. Package Contents
Thank you for purchasing the PLANET Industrial 8-Port 10/100TX + 2-Port Gigabit TP/SFP Combo Ethernet Switch, IFGS-1022TF. This manual refers to the IFGS-1022TF as the "Industrial Ethernet Switch".
Upon opening the box, please verify that it contains the following items:
- Industrial Ethernet Switch x 1
- User's Manual x 1
- Wall-mount Kit x 1
- RJ45 Dust Cap x 10
- SFP Dust Cap x 2
- DIN-rail Kit
If any items are missing or damaged, please contact your dealer immediately. Retain the original packaging for potential returns or repairs.
2. Product Specifications
Hardware Specifications
| Product | IFGS-1022TF |
|---|---|
| Fast Ethernet Copper Ports | 8 x 10/100BASE-TX RJ45 auto-MDI/MDI-X ports |
| Gigabit Ethernet Copper Ports | 2 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports (shared with Port-9 and Port-10) |
| SFP Ports | 2 x 1000BASE-SX/LX/BX SFP interfaces (shared with Port-9 and Port-10) |
| Enclosure | IP30 metal case |
| Installation | DIN-rail kit and wall-mount kit compatible |
| Connector | Removable 6-pin terminal block for power input (Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2) |
| Alarm | One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC |
| Dimensions (W x D x H) | 50 x 87.8 x 135 mm |
| Weight | 536g |
Power Specifications
| Power Requirements | Dual 9~48V DC, 24V AC |
|---|---|
| Power Consumption | Max. 7.2 watts / 24.6 BTU |
| ESD Protection | 6KV DC |
Switching Specifications
| Switch Architecture | Store-and-Forward |
|---|---|
| Switch Fabric | 5.6Gbps (non-blocking) |
| Throughput | 4.16Mpps @ 64 bytes |
| Address Table | 16K entries, automatic source address learning and aging |
| Shared Data Buffer | 4Mbits |
| Jumbo Frame | 10K bytes |
| Flow Control | IEEE 802.3x pause frame for full-duplex, Back pressure for half-duplex |
Standards Conformance
| Regulatory Compliance | FCC Part 15 Class A, CE |
|---|---|
| Stability Testing | IEC60068-2-32 (free fall), IEC60068-2-27 (shock), IEC60068-2-6 (vibration) |
| Standards Compliance | IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab Gigabit 1000T, IEEE 802.3z Gigabit SX/LX, IEEE 802.3x flow control and back pressure, IEEE 802.1p Class of Service, IEEE 802.3az Energy Efficient Ethernet (EEE) |
Environment
| Operating Temperature | -40 ~ 75 degrees C |
|---|---|
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
3. Hardware Introduction
3.1 Switch Front Panel
The front panel features Ethernet interfaces and LED indicators.
Front View Description
The front panel displays 8 x 10/100BASE-TX ports (Ports 1-8) and 2 x 10/100/1000BASE-T/SFP combo ports (Ports 9-10). System status LEDs (P1, P2, Alarm) are also present.
LED Indicators for Ports 9-10 (Gigabit RJ45 Combo & SFP Combo)
| Port | LED | Color | Function |
|---|---|---|---|
| Ports 9-10 (Gigabit RJ45/SFP) | Link/Activity | Green | Solid: Link established. Blinking: Data activity. Off: Link down. |
| Amber (for RJ45) | Solid: 1000Mbps speed. Off: 10/100Mbps speed. | ||
| Ports 9-10 (SFP) | 1000 Link/Activity | Green | Solid: 1000Mbps link established. Blinking: Data activity. Off: Link down. |
3.2 LED Definition
System LEDs
| LED | Color | Function |
|---|---|---|
| P1 | Green | Indicates Power Input 1 is active. |
| P2 | Green | Indicates Power Input 2 is active. |
| Alarm | Red | Indicates either Power Input 1 or Power Input 2 has no power. |
Per 10/100BASE-TX Port (Ports 1-8)
| LED | Color | Function |
|---|---|---|
| Link/Activity | Green | Solid: Port is operating at 10/100Mbps. Blinking: Data activity. Off: Link down. |
3.3 Switch Upper Panel
The upper panel features a 6-pin terminal block connector for dual power inputs and a fault alarm output.
Terminal Block Description
The 6-pin terminal block is used for connecting power and the alarm relay. The pin assignments are:
- Pins 1-2: Power Input 1 (DC Input: 9-48V, 0.8A max. or AC Input: 24V~, 0.4A max.)
- Pins 3-4: Fault Alarm Output (Max. Fault Alarm Loading: 24V, 1A)
- Pins 5-6: Power Input 2 (DC Input: 9-48V, 0.8A max. or AC Input: 24V~, 0.4A max.)
A diagram shows the terminal block with labels "Power 1", "Alarm", "Power 2".
3.4 Wiring the Power Inputs
To wire the power inputs:
- Insert positive and negative DC power wires (or AC wires) into the appropriate contacts: Pins 1 and 2 for POWER 1, or Pins 5 and 6 for POWER 2.
- Tighten the wire-clamp screws securely to prevent wires from loosening.
Note: Wire gauge for the terminal block should be between 12 and 24 AWG. Ensure power is OFF before performing any wiring to prevent electric shock.
3.5 Wiring the Fault Alarm Contact
The fault alarm contacts (Pins 3-4) are used to detect power failures. When a power failure occurs, the relay circuit opens.
Wiring Example: Insert wires into the fault alarm contacts (Pins 3-4). The fault alarm contacts are normally closed (CLOSE) during operation and open (OPEN) upon failure.
Note: The alarm relay circuit accepts up to 24V DC, 1A.
4. Installation
This section guides you through installing the Industrial Ethernet Switch using DIN-rail or wall-mount methods. Please read carefully before proceeding.
Note: Diagrams show installation steps, but the device pictured may not be the IFGS-1022TF.
4.1 DIN-rail Mounting Installation
Attach the DIN-rail mounting bracket to the switch and slide it onto a standard 35mm DIN-rail. Ensure it is securely fastened.
4.2 Wall-mount Plate Mounting
Attach the wall-mount plates to the sides of the switch. Then, use screws to mount the switch onto a wall or suitable surface.
4.3 Side Wall-mount Plate Mounting
This describes an alternative side-mount installation method using the provided brackets.
4.4 Grounding the Device
Important: Proper grounding is essential to protect the device from lightning strikes and electrical surges. Failure to ground the device may result in fatal damage, which is not covered under warranty.
Connect the grounding wire to the designated grounding point on the device and to a reliable earth ground connection.
5. Customer Support
Thank you for choosing PLANET products. For troubleshooting or support, please visit the PLANET website for FAQs:
http://www.planet.com.tw/en/support/faq
For further assistance, contact the PLANET switch support team at: support@planet.com.tw
Compliance and Warnings
FCC Warning
This equipment complies with Class A of Part 15 of the FCC Rules. Operation in a commercial environment is intended. If operated in a residential area, it may cause radio interference, requiring the user to correct it at their own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, it may cause radio interference, and users may need to take adequate measures.
WEEE Warning
This symbol ?️ (crossed-out wheeled bin) indicates that electrical and electronic equipment should not be disposed of as unsorted municipal waste. Users must understand its meaning and collect WEEE separately to avoid potential environmental and health effects.
Copyright © PLANET Technology Corp. 2021. Contents are subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.
