General
Package Contents
- Arctis GameBuds™
- Charging Case
- USB-C to USB-C Charging Cable (0.3 m)
- 2.4 GHz USB-C Wireless Dongle
- USB-C Female to USB-A Male Dongle Adapter
- S / M / L Ear Tips
System Compatibility
- PC
- PlayStation
- Mobile Phone
- Nintendo Switch
- Mac
- Meta Quest
Software
Arctis Companion App
Unleash the power of your Arctis GameBuds™ with quick button remapping and sound and power adjustments via the Arctis Companion App. Enjoy over 100 in-game audio presets on the go.
SteelSeries GG
Use Engine within SteelSeries GG to set custom EQ settings and control your microphone. GG also features other fantastic applications, like Sonar, an innovation in game audio that lets you hear what matters most through next-gen audio tools.
Product Overview
Earbuds
- 1. Gesture Control Buttons
- 2. GameBuds™ Status LEDs
- 3. Microphone Openings
- 4. Ear Tips
Charging Case
- 5. Wireless Dongle Storage
- 6. Charging Case LED
- 7. Earbud Storage
- 8. USB-C Charging Port
- 9. Qi Charging Case
Dongle and Accessories
2.4 GHz USB-C Dongle
- 10. Status LED
- 11. Pairing Button
Accessories
- 12. USB-C (female) to USB-A (male) Dongle Adapter
- 13. USB-C to USB-C Charging Cable
- 14. S / M / L Ear Tips
Setup
Bluetooth Pairing
Note: The first time you use the GameBuds™, they will automatically be in Bluetooth pairing mode. If you need to pair another device or if it fails, follow these steps.
- To enter pairing mode, place the GameBuds™ in the charging case.
- Press and hold the Gesture Control Buttons (1) on either GameBud for 3 seconds to activate Bluetooth pairing mode.
- The GameBuds™ Status LEDs (2) will flash blue.
- Follow your device's normal Bluetooth pairing procedure.
Gaming Device Setup
USB-A Connection
Connect the 2.4 GHz USB-C Dongle (12) to a USB-A port on your PC or PlayStation.
USB-C Connection
Connect the 2.4 GHz USB-C Dongle to a USB-C port on your PC, Android device, Nintendo Switch, or Mac.
PlayStation 5 Audio Settings
PS5 Configuration > Audio Output
| Setting | Value |
|---|---|
| Headset Output | All Audio |
PS5 Configuration > Audio Output > Volume
| Setting | Value |
|---|---|
| Headset | Set to Max |
Wireless Quick-Switch
Bluetooth and the 2.4 GHz wireless system can be used independently by triple-pressing one of the Gesture Control Buttons (1) and hearing "Bluetooth Mode" or "2.4G Mode".
Power
Power On/Off
Removing the GameBuds™ from the charging case – The GameBuds™ Status LEDs (2) will illuminate to indicate battery level. If the GameBuds™ turn off outside the charging case, they can be turned on by pressing and holding one of the Gesture Control Buttons (1) on either GameBud for 3 seconds.
The Charging Case LED (6) shows the charging case's battery level, even with the lid open or closed.
Battery Level
GameBud Battery Level LED
| LED Color | Battery Level |
|---|---|
| Green | 100%–66% |
| Yellow | 65%–26% |
| Red | 25%–10% |
| Rapidly flashing red | 9%–0% |
Charging Case LED Battery Level
| LED Color | Battery Level |
|---|---|
| Green | 100%–66% |
| Yellow | 65%–26% |
| Red | 25%–10% |
| Rapidly flashing red | 9%–0% |
Charging
To charge your GameBuds™, place them in the charging case. To charge the case, use the provided USB-C to USB-C Charging Cable (13) or place the Qi Charging Case (9) on your wireless Qi charger.
Charging Case LED Status
| LED Status | Battery Level |
|---|---|
| Solid Green | 100% |
| Flashing Green | 99%–66% |
| Flashing Yellow | 65%–26% |
| Flashing Red | < 25% |
2.4 GHz Pairing
Note: The GameBuds™ and dongle come paired. Follow these steps if you have any issues.
- To enter pairing mode, place the GameBuds™ in the charging case.
- Press and hold the Gesture Control Buttons (1) on either GameBud for 3 seconds to activate Bluetooth pairing mode.
- The GameBuds™ Status LEDs (2) will flash blue.
- Press one of the Gesture Control Buttons (1) again.
- The GameBuds™ Status LEDs (2) will flash green. You are now in 2.4 GHz pairing mode.
- Connect the dongle to a PS5 or other device. Press and hold the Pairing Button (11) for 3 seconds.
- The GameBuds™ and dongle are now paired again.
Multimedia Controls
| Action | Control | Description |
|---|---|---|
| Volume Up | ? Right Earbud Double-Tap + Press | ➕ |
| Volume Down | ? Left Earbud Double-Tap + Press | ➖ |
| Microphone Mute | ? Quick Press Left or Right Earbud | ? |
| Toggle ANC Modes | ? Tap Left Earbud | |
| Answer Call | ? Tap Right Earbud | |
| End Call | ☎️ Double-Tap Right Earbud |
Perfect Fit
Active Noise Cancellation and Audio Performance depend on the seal of the ear tips against your ear. Experiment with different sizes of S / M / L Ear Tips (14) for the best fit and comfort.
Regulatory Information
English
Europe – EU Declaration of Conformity
Hereby, GN Hearing A/S. declares that the equipment which is compliance with directive RoHS 2.0 (2015/863/EU), R.E.D (2014/53/EU), EMC Directive (2014/30/EU), and LVD (2014/35/EU) which are issued by the Commission of the European Community.
The full text of the EU declaration of conformity is available at the following internet address: https://support.steelseries.com/hc/en-us/categories/360001256111-Other-Stuff
GN Hearing A/S. hereby confirms, to date, based on the feedback from our suppliers indicates that our products shipping to the EU territory comply with REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals - (EC) 1907/2006) compliance program. We are fully committed to offering REACH compliance on the products and posting accurate REACH compliance status for all of products.
Operating Temperature
0 to + 40 °C
Frequency bands and Powers (Earbuds and Transceiver)
- a. Frequency band(s) in which the radio equipment operates: 2.400 – 2.4835 GHz
- b. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates:
- EIRP: GFSK: 7.07 dBm (Earbuds-R)
- EIRP: 8DPSK: 4.89 dBm (Earbuds-R)
- EIRP: GFSK: 7.15 dBm (Earbuds-L)
- EIRP: 8DPSK: 4.74 dBm (Earbuds-L)
- EIRP: GFSK: 9.94 dBm (Transceiver-PC)
- EIRP: GFSK: 9.55 dBm (Transceiver-XBOX)
- c. Firmware Version: V76.01 (Earbuds); V76 (Transceiver)
Charging Care
If product is charged with a USB cable, use only a suitable USB cable which is in good condition, and charge/power the product according to the instructions. The power delivered by the charger shall be between min 0.25 Watts required by the radio equipment, and max 3.5 Watts in order to achieve the maximum charging speed.
AUDIO PRODUCT WARNING!
PERMANENT HEARING LOSS MAY RESULT FROM LONG-TERM EXPOSURE TO SOUNDS AT HIGH VOLUMES. USE AS LOW A VOLUME AS POSSIBLE.
WEEE
European Union: Product, Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.
Safety Guideline for Using Lithium Battery
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. Read the safety instructions carefully and thoroughly. All cautions and warnings on the equipment or user's manual should be noted. Keep this equipment away from humidity and high temperature.
- Do not leave the equipment in an unconditioned environment with a storage temperature above 60 °C (140 °F) or below 0 °C (32 °F), which may damage the equipment.
- This unit should be operated under maximum ambient temperature of 40 °C (104 °F).
- To prevent explosion caused by improper battery replacement, use the same or equivalent type of battery recommended by the manufacturer only.
- Always keep the battery in a safe place.
Caution: Do not continue using the battery if it is swollen.
UK Declaration of Conformity
Hereby, GN Hearing A/S. declares that the following equipment, which is compliance with Electromagnetic Compatibility Regulations 2016, Electrical Equipment (Safety) Regulations 2016, Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 issued by the Department for Business, Energy& Industrial Strategy.
The full text of the UK declaration of conformity is available at the following internet address: https://support.steelseries.com/hc/en-us/categories/360001256111-Other-Stuff
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the FCC. These requirements set a SAR limit of 0.31 w/kg (Earbuds-R), 0.45 w/kg (Earbuds-L), 0.36 w/kg (Transceiver-PC ) and 0.17 w/kg (Transceiver-XBOX) averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
FCC ID
- FCC ID: ZHK-HS35R (Earbuds R)
- FCC ID: ZHK-HS35L (Earbuds L)
- FCC ID: ZHK-HS35TX (Transceiver)
TWS Earbuds / Charging Box / Transceiver
| Component | Model No. | Rated |
|---|---|---|
| TWS Earbuds | HS35R (Earbuds R) HS35L (Earbuds L) |
4.8V ⎓ 150 mA |
| Charging Box | HS35C | Input: 5V ⎓ 700mA Output: 4.8V ⎓ 300mA Qi Charging: 5V ⎓ 500mA |
| Transceiver | HS35TX | 5V ⎓ 100 mA |
Made in China
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. The County Code Selection feature is disabled for products marketed in the US/ Canada. The appliance must not be exposed to splashes or drops of water and it should not be used as a support for any object filled with liquid, such as a vase. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 0.31 w/kg (Earbuds-R), 0.45 w/kg (Earbuds-L), 0.36 w/kg (Transceiver-PC ) and 0.17 w/kg (Transceiver-XBOX) averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.
ACMA Compliance (Australia/New Zealand)
Malaysia Approval (SIRIM)
Singapore approval (IMDA)
Qi ID
22505
R-NZ Compliance (New-Zealand)
| Region | Address | Telephone |
|---|---|---|
| Asia | GN Audio Ltd. 4F.-4, No. 186, Jian 1st Rd., Zhonghe Dist., New Taipei City, Taiwan |
+886 2 8227 1999 |
| Europe | GN Hearing A/S (SteelSeries A/S.) Havneholmen 8, 1st floor DK-2450 Copenhagen SV Denmark |
+45 702 500 75 |
| USA | GN Audio USA Inc., 656 W Randolph St., Suite 3E Chicago, IL 60661, USA |
+1 312 258 9467 |
More information and support from https://steelseries.com/
Regulatory Information (Other Languages)
This document contains regulatory information and declarations in multiple languages including French, German, Italian, Spanish, Dutch, Romanian, Finnish, Danish, Swedish, Polish, Turkish, Bulgarian, Czech, Estonian, Greek, Hungarian, Latvian, Maltese, Slovak, Slovene, Korean, Japanese, Simplified Chinese, and Traditional Chinese. These sections provide compliance statements and warnings relevant to specific regions and are largely redundant with the English declarations provided above. For brevity and to maintain focus on the primary language content, detailed translations of all these sections are omitted here.
WARNING
INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. KEEP new and used batteries OUT OF REACH of CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
- If a battery is suspected to be swallowed or inserted inside any part of the body.
- Contains a non-replaceable Li-lon coin battery.
- Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
- Even used batteries may cause severe injury or death.
- Call a local poison control center for treatment information.
The compatible battery type: ZJ1254H. Nominal battery voltage: 3.85 V. Non- rechargeable batteries are not to be recharged. Do not force discharge, recharge, disassemble, heat above 40°C or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns. The product contains non-replaceable batteries.
