Lifud Technology Co., Ltd
User Manual for LiFud models including: GIF028YF EU-Standard Isolated Flicker Free Track Light LED Driver, GIF028YF, EU-Standard Isolated Flicker Free Track Light LED Driver, Track Light LED Driver, LED Driver
LED Драйвер (30-42V 550-700mA / LF-GIF028YF), арт.0320708 - купить за 1 165 руб/шт в интернет магазине
File Info : application/pdf, 7 Pages, 417.14KB
DocumentDocumentLF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver Product Description LF-GIF028YF is a 28W isolated constant current flicker-free LED driver. It features compact size, built-in design, high efficiency, high PF and Ta 55. It is suitable for split-type LED track light (any integrated track light or down light is forbidden) and its ambient temperature shall NOT exceed 55 . Its output current is adjustable via a built-in DIP switch in 4 shifts, including 550mA, 600mA, 650mA and 700mA. Features - Flicker free - High efficiency - 5-year warranty (please refer to the warranty condition) - Suitable for Class II light fixtures Applications - Indoor office lighting - Decorative lighting - Commercial lighting - Residential lighting Product Naming LF-GIF 028 YF xxxx H H: input voltage: 220-240Vac xxxx: output current (e.g. 0700: 700mA) Y: complies with certifications; F: serial number 028: maximum output power: 28W G: isolated design; IF: indoor flicker-free LED driver series 1 www.lifud.com Service Hotline: +86 755 8373 9299 LF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver Electrical Characteristics Model LF-GIF028YF Output Voltage 30-42Vdc Output Current 550mA 600mA 650mA Output Flicker (Modulation depth) IEC-Pst <0.5% 1 CIE SVM 0.4 Current Tolerance ±5% Temperature Drift ±10% Start-up Time <0.5S AC Input Voltage 220-240Vac (voltage limit: 200-264Vac) Input Frequency 47Hz-63Hz Input Current 0.18A max. Power Factor 0.94 0.94 0.95 THD 20% Input Efficiency Inrush Current 90% 18A&150uS@230Vac Load Quantity Carried Circuit Breaker Model B10 C10 by the Circuit Breaker Quantity (pcs) 30 50 Leakage Current 0.7mA Standby Power Consumption <0.5W Protection Characteristics Open Circuit Protection Short Circuit Protection <55V Hiccup mode (auto-recovery) 700mA 0.95 B16 C16 48 80 2 www.lifud.com Service Hotline: +86 755 8373 9299 LF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver Operating Temperature -30 - +55 & Tc 90 Environment Descriptions Operating Humidity 20-90%RH (no condensation) Storage -40 - +80 (six months under class I environment); Temperature/Humidity 10-90%RH (no condensation) Atmospheric Pressure 86kPa~106kPa Certifications TUV-ENEC, CE, CB, RCM, SAA, CCC Withstanding Voltage I/P-O/P: 3.75kVac/5mA/60S Insulation Resistance I/P-O/P: >100M@500Vdc Safety & Electromagnetic Compatibility Safety Standards ENEC: EN61347-1: 2015, EN 61347-2-13: 2014/A1: 2017, EN 62384: 2016/A1: 2009; CE-LVD: EN 61347-2-13: 2014/A1: 2017, EN 61347-1: 2015, EN 62493: 2015; CB: IEC 61347-1: 2015, IEC61347-2-3: 2014, IEC 61347-2-13: 2014/AMD1: 2016; RCM: AS 61347.2-13:018 CCC: GB19510.1-2009, GB19510.14-2009 CE-EMC/RCM: EN55015, EN61000-3-2, EN61000-3-3 EMI CCC:GB/T17743, GB17625.1, GB17625.2 EMS CE-EMC/RCM: EN61000-4-2, 3, 4, 5 (lightning strike 1kV), 6, 11 CCC: GB/T17626.2, 3, 4, 5 (lightning strike 1kV), 6, 11 Others IP Rating IP20 RoHS RoHS 2.0 (EU) 2015/863 Warranty Condition 5 yrs (Tc<78) Test Equipment AC power source: CHROMA6530, digital power meter: CHROMA66202, Oscilloscope: Tektronix DPO3014, DC electronic load: M9712B, LED board, constant temperature and humidity chamber, lightning surge generator: Everfine EMS61000-5B, rapid group pulse generator: Everfine EMS61000-4A, spectroanalyzer: KH3935, hi-pot tester: TH9201B, flicker tester (flicker-free coefficient test) 60N-01, etc. 3 www.lifud.com Service Hotline: +86 755 8373 9299 Remarks LF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver 1. It is recommended that customer should install overvoltage and undervoltage protection devices and surge protection devices in the power supply circuits of the light fixtures to ensure safety before connecting to electricity. 2. As an accessory, the LED driver is not the only factor determining the EMC performance of the LED light fixture. The structure and the wiring of the light fixture are also relevant. Thus it's strongly recommended the LED light fixture manufacturer should re-confirm the EMC of the whole LED light fixture. 3. The test conditions of the circuit breaker configuration quantity are the same as those of the inrush current test. 4. Do not install the driver inside the integrated track light or down light. 5. The ambient temperature (Ta) of the driver shall not exceed 55 and casing temperature (Tc) not exceed 90. 6. Unless otherwise stated, the parameters above are test results under these conditions: ambient temperature 25, humidity 50%, input voltage 230Vac/50Hz and 100% load. Characteristic Curves PF Curve Efficiency Curve 4 www.lifud.com Service Hotline: +86 755 8373 9299 LF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver Lifetime Curve Definitions of Terminals INPUT AC-L Input terminal of AC live wire OUTPUT LED+ AC-N Input terminal of AC neutral wire LED- Labels Positive electrode output of the driver Negative electrode output of the driver Built-in DIP switch version No DIP switch version Adjustable Current Shift Table (via DIP switch) Irated (CC) 1 2 550mA ON ON 600mA ON -- 650mA -- ON 700mA -- -- 5 www.lifud.com Service Hotline: +86 755 8373 9299 LF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver Structure & Dimensions (unit: mm) Packaging Specifications Model Packaging Dimensions Quantities Weights LF-GIF028YF 385*285*210 mm (L*W*H) 17 pcs/layer; 7 layers/ctn; 119 pcs/ctn 80±5 g/pc; 11±0.6 kg/ctn 6 www.lifud.com Service Hotline: +86 755 8373 9299 LF-GIF028YF EU-Standard Isolated Flicker-free Track Light LED Driver Transportation & Storage Transportation Suitable transportation means: vehicles, boats and aircraft. During transportation, there should be awnings for rain protection and sun protection. Civilized loading and unloading are required. There should be no severe vibration or impact. Storage Storage in accordance with the provisions of Class I environment. For products which have been stored for more than six months, they mustn't be used until they pass the re-inspection. Attention Please use this product according to its specifications otherwise there may be malfunction. Use light fixtures that have not been certified or are not compatible with the LED drivers may cause fire or other hazards. Man-made damage, any use beyond the specification and non-original-factory modification are not covered by warranty. Remark: The final interpretation right of the contents of this data sheet belongs to Lifud Technology Co., Ltd. 7 www.lifud.com Service Hotline: +86 755 8373 9299