Instruction Manual for Q-TRAN models including: ANYBEND-SW, Micro 5 Series, Q CAP Flexible Fixtures, Micro 5 Series Q CAP Flexible Fixtures, ANYBEND-SW Q CAP Flexible Fixtures, Flexible Fixtures, Fixtures
Technical - IES Files, CAD files, Specs | Q-Tran
File Info : application/pdf, 5 Pages, 2.45MB
DocumentDocumentANYBEND-SW Q-CAP Flexible Fixtures - MICRO 5 SERIES Mounting WSC-02: WHITE SNUG CLIP - For indoor/outdoor use - Surface mounting - Stainless steel/corrosion resistant - Discrete mounting - White glossy finish .25" .44" .50" MOUNTING HARDWARE - #4 flat screw (one provided for each clip) - 832 Silicone (sold separately) MICRO5-PPS-2: PVC MOUNT CLIP - For indoor/outdoor use - Surface mounting - Wire way feature - Off white finish - Can be mounted with or without PPS-BRACKET (COVE FRIENDLY) Built in wireway: The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering .56" .46" .94" 2.0" 2.0" MOUNTING HARDWARE - #6 flat head screw (1 screw for every 16") - 832 Silicone (sold separately) MICRO5-PPS-LP-2: PVC LOW PROFILE MOUNT CLIP - For indoor/outdoor use - Surface mounting - Low profile mounting - No wire way - Off white finish .47" .56" 2.00" MOUNTING HARDWARE - #6 Flat head screw (1 screw for every 16") - 832 Silicone (sold separately) MICRO5-PPS-96 & MICRO5-PPS-FT: PVC MOUNT CHANNEL - 96" (PPS-96) or custom length (PPS-FT) - For indoor/outdoor use - Surface mounting - Field modifications made easy - Wire way feature - Off white finish - Can be mounted with or without PPS-BRACKET (COVE FRIENDLY) .56" .46" .94" .47" .31" 96" / FT 96" / FT 96" or custom length Built in wireway: The PPS-BRACKET allows you to create a wire way under the PPS channel without any screws interfering MOUNTING HARDWARE #6 flat head screw (1 screw for every 16") - 832 Silicone (sold separately) MICRO5-PPS-LP-96 & MICRO5-PPS-LP-FT: PVC LOW PROFILE MOUNT CHANNEL - 96" (PPS-LP-96) or custom length (PPS-LP-FT) - For indoor/outdoor use - Surface mounting - Low profile mounting - No wire way - Off white finish .56" .47" 96"/FT 96" or custom length MOUNTING HARDWARE - #6 Flat head screw (1 screw for every 16") - 832 Silicone (sold separately) © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-12-21-21 ANYBEND-SW Q-CAP Flexible Fixtures - MICRO 5 SERIES Mounting Accessories 90° 120° 150° 180° 210° 240° 270° Q-ANGLE (Full ordering guide and installation available for this product in the accessories section of website) - Offset lighting to illuminate signs, artwork, etc. - For indoor/outdoor use 90° BACK VIEW 180° BACK VIEW - Wall, ceiling, or floor mounted - Anodized aluminum/corrosion resistant 1.38" - Free moving rotating head which can be locked into specific angles - Preset dial notches for easy adjustments from 90° to 270° 2.23" 1.95" MOUNTING HARDWARE - Mounting Clip - 6-32 Fillister head screw - 4-40 Flat head screw - Drywall anchor (not provided) - #6- 1 ¼ " wood screw 1.50" 1.93" BASE; BOTTOM VIEW 1.50" 12" 12" 12" Q-ANGLE MUST BE MOUNTED EVERY 12" SEE Q-ANGLE INSTALL FOR MORE INFORMATION .63" 3.00" © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-12-21-21 ANYBEND-SW Q-CAP Flexible Fixtures - MICRO 5 SERIES Rated DRY - Lengths up to 191" - Encapsulated in polyurethane - NOT FIELD CUTTABLE COMPATIBLE CONNECTORS BW BRL INPUT OUTPUT .38" .38" BARE WIRE 24" DRY BARREL 6" CON6/24 INPUT OUTPUT .38" .39" CONNECTOR 6" CONNECTOR 24" WET - Lengths up to 191" - Encapsulated in polyurethane - NOT FIELD CUTTABLE .38" .38" COMPATIBLE CONNECTORS BW BRL INPUT OUTPUT BARE WIRE 24" WET BARREL 6" © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-12-21-21 ANYBEND-SW Q-CAP Flexible Fixtures - MICRO 5 SERIES Lens ENC/CL Encapsulated in Clear ENC/TL Encapsulated in Translucent Connectors BW BRL INPUT OUTPUT BRL INPUT OUTPUT BARE WIRE 24" DRY BARREL 6" WET BARREL 6" Type S1A SINGLE (Input only) S1B IN Light Orientation CON6/24 INPUT . .38" OUTPUT .39" CONNECTOR 6" CONNECTOR 24" PASS THROUGH (Input/Output) P1A P1B OUT IN IN IN IN IN IN OUT OUT IN OUT MICRO5-PPS-2 .94" 2.0" .56" MICRO5-PPS-LP-2 Order the PPS-2/PPS-LP-2 to support two fixtures together with no visible break and order the PS-96/PPS-FT/PS-LP-96/PPS-LP-FT to support the fixture 2 1 2 .47" .56" 2.00" FIXTURE WITH BARE WIRE = PPS - 2 or PPS - LP - 2 = PPS - 96/PPS - FT or PPS - LP - 96/PPS - LP - FT © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-12-21-21 ANYBEND-SW Q-CAP Flexible Fixtures - MICRO 5 SERIES Connectors/Wire BARE WIRE - 22 AWG, 2 conductor - Outdoor rated - 24" Standard length BW DRY BARREL - 22 AWG - Dry rated - 6" Standard length including connector BRL WET BARREL - 22 AWG - Wet rated - 6" Standard length including connector BRL .10" BARE WIRE .42" .35" INPUT CONNECTOR OUTPUT CONNECTOR .45" .66" INPUT CONNECTOR OUTPUT CONNECTOR CONNECTOR 6" / CONNECTOR 24" - 22 AWG, 2 conductor - Indoor rated - 6" or 24" Standard length CON6 / CON24 .18" .38" INPUT CONNECTOR .18" .39" OUTPUT CONNECTOR Related Products TWO-FER Sold: Individually FOUR-FER Sold: Individually MALE BENDER Sold: Individually FEMALE BENDER Sold: Individually Q-MINI-J* Sold: Individually Two outputs and one input Four outputs and one input Connects an input to an input Connects an output to an output Junction box that allows for splicing of LED lead wires *Full ordering guide available for this product in the accessories section of website © 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-12-21-21