User Manual for iBASE models including: ASB200 Series Slim System
Support-IBASE - Industrial Computer Manufacturer in Taiwan, Industrial Motherboard, Panel PC, Embedded System, Digital Signage Player, Video Wall Player, RISC SBC, Network Appliance
File Info : application/pdf, 17 Pages, 538.82KB
DocumentDocumentASB200 Series User Manual
2008 December V1.0
Copyright © 2008 IBASE Technology INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of IBASE Technology INC. ("IBASE"). Products and corporate names mentioned in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used for identification purposes only. All trademarks are the property of their respective owners. Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes without prior notice.
2
Table of Contents
Accessories.............................................................................................................. 6 Components............................................................................................................ 7
Front View ..................................................................................................................... 7 Rear View (ASB200-885) ................................................................................................ 8 Rear View (ASB200-883) .............................................................................................. 10
Specification ......................................................................................................... 12 Mounting ASB200 to the Wall ............................................................................... 13
Wall mounting requirements........................................................................................ 13 Selecting the location................................................................................................... 14
Exploded view of the ASB200 assembly ASB200-885 .......................................... 15
Parts description .......................................................................................................... 15
Exploded view of the ASB200 assembly ASB200-883 .......................................... 16
Parts Description.......................................................................................................... 16
Driver Installation ................................................................................................. 17 BIOS Setup ............................................................................................................ 17
3
Safety Information
Your ASB200-883/885 is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.
Setting up your system
· Read and follow all instructions in the documentation before you operate your system.
· Do not use this product near water. · Set up the system on a stable surface or secure on wall with the provided rail. Do
not secure the system on any unstable plane or without the rail. · Do not place this product on an unstable cart, stand, or table. The product may
fall, causing serious damage to the product. · Slots and openings on the chassis are for ventilation. Do not block or cover these
openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings. · This system should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. · Use this product in environments with ambient temperatures between 0°C and 45°C. · If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating.
Care during use
· Do not walk on the power cord or allow anything to rest on it. · Do not spill water or any other liquids on your system. · When the system is turned off, a small amount of electrical current still flows.
Always unplug all power, and network cables from the power outlets before cleaning the system. · If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. ¾ The power cord or plug is damaged. ¾ Liquid has been spilled into the system. ¾ The system does not function properly even if you follow the operating
instructions.
4
¾ The system was dropped or the cabinet is damaged.
Lithium-Ion Battery Warning
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.
NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users
5
Accessories
a. Power Cord x 1
b. M/B Manual x 1
c. Driver CD x 1
d. Power Brick x 1
e. Mounting Rail Screw x 4
f. Mounting Rail x 2
6
Components
Front View
Refer to the diagram below to identify the components on this side of the system.
ON/OFF The power switch allows powering ON and OFF the system.
RST The reset switch allows reset the system.
HDD The hard disk LED blinks when data is being written into or read from the hard disk drive.
PWR The power LED illuminated when system been power on.
USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.
SPK The stereo audio jack (3.5mm) is used to connect the system's audio out signal to amplified speakers or headphones.
MIC The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings.
7
Rear View (ASB200-885)
Refer to the diagram below to identify the components on this side of the system.
COM/VGA This position could be either VGA or COM output depends on what model you ordered.
COM Communication or serial port one is compatible with RS-232 interface.
VGA Video Graphic Array (VGA) port supports a VGA-compatible device such as a monitor or projector. The system default display output port.
DC-IN 12V The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the system. To prevent damage to the system, always use the supplied power adapter.
DVI The Digital Visual Interface (DVI) port supports a high quality VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.
LAN The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.
8
USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.
KB/MS You can connect PS/2 compatible device into this port directly or using Y-cable to have PS/2 mouse port extension.
MS The PS/2 mouse port is use to connect PS/2 mouse.
KB The PS/2 keyboard port is use to connect PS/2 compatible devices such as keyboard, MSR and scanner.
9
Rear View (ASB200-883)
Refer to the diagram below to identify the components on this side of the system.
COM / VGA
DC-IN The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the system. To prevent damage to the system, always use the supplied power adapter.
COM/VGA This position could be either VGA or COM output depends on what model you ordered.
COM Communication or serial port one is compatible with RS-232 interface.
VGA Video Graphic Array (VGA) port supports a VGA-compatible device such as a monitor or projector. The system default display output port.
USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripheral acting as additional plug-in sites or hubs.
LAN The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network.
10
DVI The Digital Visual Interface (DVI) port supports a high quality VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.
KB/MS You can connect PS/2 compatible device into this port directly or using Y-cable to have PS/2 mouse port extension.
MS The PS/2 mouse port is use to connect PS/2 mouse.
KB The PS/2 keyboard port is use to connect PS/2 compatible devices such as keyboard, MSR and scanner.
11
Specification
System Mainboard Const r uct ion Cha ssis Color St or a g e Mounting Dim ensions
Pow er Supply Operating Tem perat ure St or a g e Tem perat ure Relative Hum idity Vibration Shock RoHS
I B883 / I B885 Alum inum & Steel Black 2.5" 80GB SATA HDD x 1 Desktop or wall m ount 240(W) x 37(H) x 182(D)m m (9.45" x 1.45" x 7.16") 80W DC adapter 0° C ~ 45° C ( 32° F ~ 113° F)
-20°C ~ 80°C
5~ 95% @45° C ( non- condensing) HDD: 0.25grm / 5~ 500Hz random operation HDD: 15grm s peak acceleration ( 11 m sec duration) Av ailab le
This specification is subject to change without prior notice.
12
Mounting ASB200 to the Wall
Using attached mounting rail, you can install ASB200 on wood, drywall surface over studs, or a solid concrete or metal plane. Ensure the installer uses at least four M4 length 8mm screws to secure the system on wall. Six M4 length 8mm screws are recommended to secure the system on wall. Fasteners are not included with the unit, and must be supplied by the installer. The types of fasteners required are dependent on the type of wall construction. Choose fasteners that are rated either "Medium Duty" or "Heavy Duty." To assure proper fastener selection and installation, follow the fastener manufacturer's recommendations.
Wall mounting requirements
Note: Before mounting the system on wall, ensure that you are following all applicable building and electric codes. When mounting, ensure that you have enough room for power and signal cable routing. And have good ventilation for power adapter. The method of mounting must be able to support weight of the ASB200 plus the suspend weight of all the cables to be attached to the system. Use the following methods for mounting your system:
13
Mounting to hollow walls Method 1: Wood surface A minimum wood thickness 38mm (1.5in.) by 25.4 cm (10in.) of high, construction grade wood is recommended. Note: This method provides the most reliable attachment of the unit with little risk that the unit will come loose or require ongoing maintenance. Method 2: Drywall walls - Drywall over wood studs is acceptable.
Mounting to a solid concrete or brick wall - Mounts on a flat smooth surface.
Selecting the location
Plan the mounting location thoroughly. Locations such as walkway areas, hallways, and crowded areas are not recommended. Mount the unit to a flat, sturdy, structurally sound column or wall surface. The best mounting surface is a standard countertop, cabinet, table, or other structure that is minimally the width and length of the unit. This recommendation reduces the risk that someone may accidentally walk into and damage the device. Local laws governing the safety of individuals might require this type of consideration.
14
Exploded view of the ASB200 assembly ASB200-885
4
5 6
7 1
2 8
3
Parts description
Part NO. Description 1 HDD 3 I/O wall panel 5 ID737A 7 Bottom chassis
Part NO. Description 2 VGA/COM Extension Cable 4 Top cover 6 IB885 8 Mounting rail
15
Exploded view of the ASB200 assembly ASB200-883
Parts Description
Part NO. Description 1 DC-IN extension cable 3 I/O wall panel 5 HDD 7 IB883 9 Mounting rail
Part NO. Description 2 VGA/COM Extension Cable 4 Top cover 6 ID737A 8 Bottom chassis
16
Driver Installation
Please refer correspond mainboard user manual to install the driver properly.
BIOS Setup
Please refer correspond mainboard user manual to configure BIOS setting.
17
Acrobat Distiller 8.1.0 (Windows)