Aldes InspirAIR® Side 150 Classic Modbus Droite
Groupe de ventilation double flux
Référence : 11023457
Product Overview
The InspirAIR® Side 150 Classic Modbus Droite is a double flow ventilation unit designed to provide fresh air while recovering heat from extracted air. It is suitable for residential and tertiary applications, offering improved air quality and comfort.
Key Features:
- Up to 90% filtration of bacteria, pollen, and fine particles.
- Modern design to integrate into demanding interiors.
- Tempers indoor air while isolating from external noise.
Principes de fonctionnement (Operating Principles)
This unit provides general and permanent ventilation for the dwelling, recovering heat from extracted air to preheat incoming air. The incoming air is purified by customizable filters to ensure healthy air within the home.
Description produit (Product Description)
A double flow ventilation solution with heat recovery that filters incoming air and renews indoor air without heat loss.
Domaines d'application (Application Areas)
- Collective residential housing
- Individual residential housing
- New construction
- Renovation
- Tertiary premises
Mise en oeuvre (Installation)
- Horizontal ceiling or vertical wall mounting.
- Condensate connection on a Ø 32 mm PVC network.
- Recommended installation in a heated volume.
Caractéristiques principales (Main Characteristics)
- Material: PPE body and metal sheets.
- Configuration: Right or left (2 versions).
- Flow rate: 150, 240, 370 m³/h.
- Bypass: 100% bypass as standard.
- Control: Classic integrated keypad.
- Four modes: Vacation, Daily, Kitchen, Guest.
Composition des kits (Kit Components)
- InspirAIR® Side unit
- Fixation kit
- D.160 connector (x4)
- Classic integrated control keypad
- Siphon
- Dust filter
- Pollen filter
- Modem for Aldes Connect® application
Accessoires (Accessories)
- Fixing bracket for InspirAIR® Side (Ref: 11023322)
- 1.5 kW DEE FLY and InspirAIR® bus preheating coil (Ref: 11023225)
- Wired 3-speed remote control (Ref: 11023065)
Consommables (Consumables)
- Bacteria filter InspirAIR® Side 150 (Ref: 11023461)
- Fine particle filter InspirAIR® Side 150 (Ref: 11023460)
- Pollen filter InspirAIR® Side 150 (Ref: 11023459)
- Dust filter InspirAIR® Side 150 (Ref: 11023469)
- VOC filter InspirAIR® Side 150 (Ref: 11023462)
Données générales (General Data)
- Reference: 11023457
- Available Filters: Pollen (Coarse 65%), Fine Particles (ePM10 50%, ePM2.5 65%), Bacteria (ePM2.5 95%, ePM1 80%), VOC (ePM10 85%, ePM2.5 65%).
- Heat exchanger type: Counter-flow.
- Motor type: EC.
Données dimensionnelles (Dimensional Data)
InspirAIR® Side 150
| Reference | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | Weight (kg) |
|---|---|---|---|---|---|---|---|
| 11023457 | 600 | 160 | 200 | 1070 | 215 | 420 | 27 |
Données aérauliques (Aeraulic Data)
InspirAIR® Side 240
| Reference | Max flow rate (m³/h) |
|---|---|
| 11023457 | 150 |
Données électriques (Electrical Data)
| Reference | Voltage (V) | Frequency (Hz) | Max Power (W) | Max Current (A) |
|---|---|---|---|---|
| 11023457 | 230 | 50 | 135 | 1.2 |
Données réglementaires (Regulatory Data)
| Reference | Energy class ventilation - Average climate |
|---|---|
| 11023457 | A |
Performance Curves
The document includes performance curves showing the relationship between pressure (Pa) and flow rate (m³/h) for different operating percentages (40% to 100%) for both insufflation and extraction. These curves are based on specific test conditions:
- Outside air: Dry air at 5°C, HR < 20%.
- Inside air: Dry air at 25°C, HR < 20%. (EN13141-7 and EN308)
The curves detail:
- Insufflation - 100%, Extraction - 100%
- Insufflation - 90%, Extraction - 90%
- Insufflation - 80%, Extraction - 80%
- Insufflation - 70%, Extraction - 70%
- Insufflation - 60%, Extraction - 60%
- Insufflation - 50%, Extraction - 50%
- Insufflation - 40%, Extraction - 40%
