Simonrack Shelving Unit Safety and Usage Guidelines

General Load and Usage Instructions

Load Limits: Never exceed the specified maximum load per shelf and for the entire rack. Ensure the load is evenly distributed over the entire shelf to avoid point loads.

Assembly: Follow the assembly instructions carefully and make sure all screws and fasteners are tight. Shelving units must be firmly anchored to the wall to achieve maximum load capacity.

Maintenance: Perform regular inspections to ensure there are no structural damages or loose parts.

Handling Heavy Loads: Use proper lifting equipment and techniques to place and remove heavy loads and prevent injury or damage.

Safe Use: Do not climb on the shelves or use them as ladders. Only use on flat surfaces. Ensure that the area around the shelves is free of obstacles to ensure safe working.

Manufacturer's Instructions: Read the entire manufacturer's instruction manual carefully and follow all listed safety precautions. Before use, read all manufacturer information. Warning instructions cover some risks but not all. Keep manuals for reference.

Child Safety and Packaging Warnings

Child Usage: Products should never be used by children or by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, unless the manufacturer's manual explicitly allows. Children should never play unsupervised. Cleaning and maintenance must not be performed by children.

Packaging Hazard: Risk of suffocation. Packaging materials are not toys. Keep packaging out of reach of children and people with reduced abilities.