Greenworks 40-Volt Mower Operator Manual LMF414

1. Description

1.1 Purpose

This machine is used for domestic lawn mowing. The cutting blade must be approximately parallel to the ground. All four wheels must touch the ground while mowing.

1.2 Overview

The following components are part of the Greenworks 40-Volt Mower:

  1. Handle knob
  2. Lower handle
  3. Upper handle
  4. Knob
  5. Bolt
  6. Grass catcher
  7. Rear discharge door
  8. Mulch plug
  9. Side discharge chute
  10. Side discharge door
  11. Height adjustment lever
  12. Battery door
  13. Battery pack
  14. Safety key
  15. Battery release button
  16. Start button
  17. Bail switch
  18. Self-propel lever
  19. Speed control button
  20. Storage switch

2. Read All Instructions

⚠ DANGER

This machine was built to be operated according to the rules for safe operation included in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to observe all safety instructions could result in serious injury or death.

ℹ NOTE

When using electric lawn mowers, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. These basic precautions include the following:

2.1 Children and Bystanders

Tragic accidents can occur if the operator is not alert to the presence of children or bystanders.

2.2 General Operation

2.3 Slope Operation

Slopes are a major factor related to slip-and-fall accidents, which can result in severe injury. Operation on slopes requires extra caution. If you feel uneasy on a slope, do not mow it.

Do:

Do not:

2.4 Service/Maintenance

3. Symbols on the Product

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SymbolNameExplanation
VVoltVoltage
AAmperesCurrent
HzHertzFrequency (cycles per second)
WWattPower
minMinutesTime
/minPer MinuteRevolutions, strokes, surface speed, orbits etc., per minute
Alternating CurrentType of current
Direct CurrentType or a characteristic of current
n₀No Load SpeedRotational speed, at no load
Safety AlertPrecautions that involve your safety.
👁️Eye ProtectionAlways wear eye protection with side shields marked to comply with ANSI Z87.1 when operating this equipment.
☁️WARNING --- Wet ConditionsDo not expose the product to rain or moist conditions.
📚Read Operator's ManualTo reduce the risk of injury, user must read and understand operator's manual before using this product.
⚙️Maintain Safety DevicesDo not open or remove safety devices while the tool is running.
👇Looking Behind While BackingLook down and behind first to avoid tripping when pulling back.
🚫🦶DANGER --- Keep Hands and Feet AwayTo reduce the risk of injury, keep hands and feet away from rotating parts. Do not operate unless discharge cover or grass bag is in its proper place. If damaged, replace immediately.
🚫👪DANGER --- Keep Bystanders AwayDo not mow when children or others are nearby.
🚫💣DANGER --- Thrown DebrisRemove objects that can be thrown by the blade in any direction. Wear safety glasses.
🚫⛰️ MAX 15°DANGER --- Steep Slope HazardUse extra caution on slopes. do not mow slopes greater than 15 degrees.

4. Risk Levels

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOLSIGNALMEANING
DANGERIndicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
WARNINGIndicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
CAUTIONIndicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
CAUTION(Without Safety Alert Symbol) Indicates a situation that may result in property damage.

5. Environmentally Safe Battery Disposal

The toxic and corrosive materials below are in the batteries used in this machine: Lithium-Ion, a toxic material.

⚠ WARNING

Discard all toxic materials in a specified manner to prevent contamination of the environment. Before discarding damaged or worn out Li-ion battery, contact your local waste disposal agency, or the local Environmental Protection Agency for information and specific instructions. Take the batteries to a local recycling and/or disposal center, certified for lithium-ion disposal.

⚠ WARNING

If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Discard it and replace with a new battery pack. DO NOT TRY TO REPAIR IT! To prevent injury and risk of fire, explosion, or electric shock, and to avoid damage to the environment:

  • Cover the terminals of the battery with heavy-duty adhesive tape.
  • DO NOT try to remove or destroy any of the battery pack components.
  • DO NOT try to open the battery pack.
  • If a leak develops, the released electrolytes are corrosive and toxic. DO NOT get the solution in the eyes or on skin, and do not swallow it.
  • DO NOT put these batteries in your regular household trash.
  • DO NOT incinerate.
  • DO NOT put them where they will become part of any waste landfill or municipal solid waste stream.
  • Take them to a certified recycling or disposal center.

6. Installation

⚠ WARNING

Do not change or make accessories that are not recommended by the manufacturer.

⚠ WARNING

Do not put in the safety key or the battery pack until you assemble all the parts.

6.1 Unpack the Machine

⚠ WARNING

Make sure that you correctly assemble the machine before use.

⚠ WARNING
  • If the parts have damage, do not use the machine.
  • If you do not have all the parts, do not operate the machine.
  • If the parts are damaged or missing, speak to the service center.
  1. Open the package.
  2. Read the documentation in the box.
  3. Remove all the unassembled parts from the box.
  4. Remove the machine from the box.
  5. Discard the box and package in compliance with local regulations.

6.2 Unfold the Lower Handle

  1. Pull and turn the handle knobs 90°.
  2. Unfold the lower handle.
  3. Line up the handle knobs in one of the three positions on the brackets.
  4. Turn the handle knobs 90° until they engage the holes in the brackets.
ℹ NOTE

Make sure that the two handle knobs are in the same position.

⚠ WARNING

Do not make damage to the cables when you fold or unfold the handle.

6.3 Install the Upper Handle

  1. Align the holes in the upper handle and the lower handle.
  2. Put the bolts through the holes.
  3. Tighten the knobs onto the bolts.
  4. Do the same operation on the other side.

6.4 Install the Grass Catcher

  1. Remove the mulch plug.
  2. Remove the side discharge chute.
  3. Open the rear discharge door and hold it.
  4. Hold the grass catcher by its handle and engage the hooks on the door rod.
  5. Close the rear discharge door.

6.5 Install the Mulch Plug

  1. Remove the grass catcher.
  2. Open the rear discharge door and hold it.
  3. Hold the mulch plug by its handle and fit it in the discharge chute.
  4. Close the rear discharge door.

6.6 Install the Side Discharge Chute

⚠ CAUTION

When you use the side discharge chute,

  • do not install the grass catcher.
  • keep the mulch plug installed.
  1. Open the side discharge door and hold it.
  2. Line up the recesses of the side discharge chute below the pivot.
  3. Close the side discharge door.

6.7 Set the Blade Height

The machine can be set to different blade heights.

  1. Pull the height adjustment lever rearward to increase the blade height.
  2. Pull the height adjustment lever forward to decrease the blade height.

6.8 Install the Battery Pack

⚠ WARNING
  • If the battery pack or charger is damaged, replace the battery pack or the charger.
  • Stop the machine and wait until the engine stops before you install or remove the battery pack.
  • Read, know, and do the instructions in the battery and charger manual.
ℹ NOTE

The machine has a battery storage compartment that helps store the battery pack.

  1. Open the battery door.
  2. Align the lift ribs on the battery pack with the grooves in the battery compartment.
  3. Push the battery pack into the battery compartment until the battery pack locks into place.
  4. When you hear a click, the battery pack is installed.
  5. Close the battery door.
ℹ NOTE

The engine starts only when you put in the safety key.

6.9 Remove the Battery Pack

  1. Open the battery door.
  2. Remove the safety key.
  3. Push and hold the battery release button.
  4. Remove the battery pack from the machine.

7. Operation

⚠ WARNING

Wear eye protection during operation.

7.1 Start the Machine

  1. Put in the safety key.
  2. Push and hold the start button.
  3. While you hold the start button, pull the bail switch in the direction of the handle bar.
  4. Release the start button to start the machine.

Soft-Start

This Li-ion machine has a

PDF preview unavailable. Download the PDF instead.

388013455 gwk 40v self-propelled mower operator manual saddle stitch AH XSL Formatter V6.4 MR4 for Windows (x64) : 6.4.6.29211 (2017/06/13 15:49JST) Antenna House PDF Output Library 6.4.1067 (Windows (x64))

Related Documents

Preview Greenworks 40-Volt Mower Operator Manual LMF414
This operator's manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of the Greenworks 40-Volt Cordless Lawn Mower, model LMF414. Learn about key features, safety precautions, troubleshooting tips, and warranty information to ensure optimal performance and longevity of your domestic lawn mowing equipment.
Preview Greenworks 40-Volt Lawn Mower Operator Manual LMF414
Comprehensive operator manual for the Greenworks 40-Volt Lawn Mower model LMF414, covering safe operation, installation, maintenance, troubleshooting, and warranty information for domestic lawn mowing.
Preview Greenworks LMF414 Lawn Mower Operator Manual
Comprehensive operator manual for the Greenworks LMF414 40V cordless lawn mower, covering assembly, operation, maintenance, troubleshooting, and safety guidelines for domestic lawn care.
Preview Greenworks 40-Volt Cordless Lawn Mower Operator Manual LMF414
Comprehensive operator manual for the Greenworks 40-Volt Cordless Lawn Mower model LMF414. Includes detailed instructions for assembly, operation, maintenance, troubleshooting, and safety guidelines for domestic lawn mowing.
Preview Greenworks MO40L02 40V SP Mower Operator Manual
Comprehensive operator manual for the Greenworks MO40L02 40V Self-Propelled Lawn Mower, covering assembly, safe operation, maintenance, troubleshooting, technical specifications, and warranty information for domestic lawn mowing.
Preview Greenworks MO40L02 LMF414 40V Cordless Lawn Mower Operator Manual
This Greenworks operator manual provides comprehensive instructions for the MO40L02 and LMF414 40V cordless lawn mower. Learn about safe operation, installation, maintenance, troubleshooting, and proper battery disposal for efficient domestic lawn mowing.
Preview Greenworks MO40L02 Cordless Lawn Mower Operator Manual
This operator manual provides comprehensive instructions for the Greenworks MO40L02 cordless lawn mower, covering assembly, safe operation, maintenance, and troubleshooting. It is designed for domestic lawn mowing, ensuring users can effectively and safely manage their lawn care tasks.
Preview Greenworks MO40L02 40V Cordless Lawn Mower Operator Manual
Comprehensive operator manual for the Greenworks MO40L02 40V cordless lawn mower, covering assembly, operation, maintenance, troubleshooting, and safety guidelines for efficient lawn care.