Pure Acoustics AMNESIA 1200W Portable Karaoke Party Speaker

Caution and Safety Guide

Please turn off the speaker when not in use. If the unit is not used for extended periods of time, we recommend disconnecting the unit from the power source. To prevent speaker damage, do not install in areas of high heat or in areas with direct exposure to sunlight. Do not install the speaker near a place where it may come in contact with rain, moisture, or other liquids. Install the unit on a flat surface with good ventilation. Blocking these vents can damage the speakers as a result of overheating. To clean the unit, wipe it with a dry napkin or rag. Warning: Do not use detergents, gels, etc. to clean the speaker. In the event of a malfunction, do not open the speaker yourself! Contact a qualified professional for proper diagnosis and repair. Caution: Dismantling the unit yourself is dangerous and may damage you and the speaker and void your warranty.

Features

• Powerful Sound: 1200W watts of listening experience with deep bass and a strong and clear sound.
• Party Lighting: Lighting panel with colored LEDs along the entire speaker with effects according to the rhythm of the music.
• Easy Operation: User-friendly and quick-to-operate speaker interface.
• Bluetooth: Stream music wirelessly to the speaker, suitable for use with iPhone, Android, and more.
• TWS (True Wireless Stereo): Connect 2 speakers to one audio source wirelessly for a powerful surround sound experience. (Works only in Bluetooth mode and requires speakers of the same model).
• USB / Micro SD Input: For playing MP3 files directly from a memory card.
• FM Radio: A digital tuner that includes automatic scanning and saving stations in the speaker's memory.
• Digital Recording: For recording karaoke directly onto a USB drive or memory card.
• Wireless Microphones: Includes 2 wireless microphones (where applicable).
• Wired Microphone Input: Option to connect wired microphones.
• Guitar Input: 6.3 mm guitar input that includes a separate volume switch.
• Main Audio Controls: Control of the main volume, treble, bass, and connected microphones simultaneously.
• AUX Input: Direct connection to smartphones, tablets, and any music source with a 3.5 mm port.
• Display: Shows the source of the music (e.g., Bluetooth, AUX, USB) for easy operation.
• Telescopic Handle: For easy, convenient, and safe transport.
• IR Remote Control: Full control of all speaker functions.

Main Panel

The main panel features various inputs, controls, and buttons for operating the speaker.

Buttons and Functions:

1. Inputs: GUITAR / AUX / MICRO SD / USB inputs / Wired microphone 1 / Wired microphone 2.
2. VOLUME: Controls Main volume, Guitar volume, Microphone volume, Echo volume.
3. REC / GUITAR / MIC buttons:
   • MIC: Short press once to enter microphone mode, then adjust microphone volume using the volume selector (No. 2). Two short presses enter echo microphone control mode, then adjust echo volume with the volume selector (No. 2).
   • GUITAR: Short press once to enter guitar control mode, then adjust guitar volume with the volume selector (No. 2).
   • REC: Record key. Karaoke can be recorded on a USB or SD card (not included).
4. LIGHT SWITCH / MIC PRIORITY / EQ buttons:
   • EQ: Equalizer. Allows switching between built-in digital equalizer modes.
   • MICROPHONE PRIORITY: Lowers music volume when a microphone is in use. Press to activate/deactivate. A single click activates the function, lowering music when using the microphone.
   • LIGHT SWITCH: Turns the disco lighting on/off.
5. TREBLE / BASS: Short press once to enter TREBLE mode, then adjust volume with the volume selector (No. 2). Two presses enter BASS mode.
6. REPEAT: Repeats the previous song.
7. PREV: Short click to go to the previous song.
8. PLAY / PAUSE: Plays or pauses the current song.
9. NEXT: Short click to go to the next song.
10. MODE: Switches between audio sources (BT / USB / AUX / SD / FM).

Connections and Power:

11. DC power connection: For charging the internal battery.
12. External Power Supply: Port for connecting an external power adapter.
13. Switch: Main power on/off switch for the speaker.

Connections

Bluetooth Connection

1. Press the MODE button (No. 10) until Bluetooth mode is selected; a sound will indicate mode entry and 'Bluetooth' will appear on the display.
2. Ensure the speaker is within 1 meter of your Bluetooth device.
3. Set your Bluetooth device to scan mode.
4. Select "AMNESIA" from the list of scanned devices.
5. If prompted for a code, enter "0000" and select Yes/OK to complete pairing.

FM Radio with Automatic Scanning

1. Turn on the speaker using the power switch (No. 13).
2. Press the MODE button (No. 10) until FM mode is selected.
3. To perform an automatic scan, press and hold the PLAY/PAUSE button (No. 8) for 3-5 seconds.
4. Use the NEXT (No. 9) and PREV (No. 7) buttons to switch between scanned radio stations (frequencies 87.5-108.0 MHz).

AUX Input

Allows analog connection between the speaker and an audio source such as smartphones, tablets, or MP3 players.

TWS - Mode (True Wireless Stereo)

1. Turn on both speakers and ensure both are in Bluetooth mode, positioned within 3 meters of each other.
2. Press and hold the NEXT song button (No. 9) for 3-5 seconds on one speaker to initiate a TWS link between the two.
3. Upon successful linking, one speaker will become the "parent" (master) and the other the "son" (slave).
4. Activate Bluetooth scan on your music source (smartphone, tablet...) and connect to the "master" speaker, which will appear as "AMNESIA" in the scan list.

Disconnect TWS: Press and hold the NEXT song button (No. 9) again to disconnect the speakers.

Note: The TWS function is only available when two speakers are in Bluetooth mode and are of the same model.

USB Input or MICRO SD Memory Card

You can play music from a USB drive or a Micro SD memory card (limited to 32 GB).

A. Insert the USB drive into the USB port; the speaker should play the stored music. If playback doesn't start automatically, press the MODE button (No. 10) to enter USB mode.

B. Insert the Micro SD memory card; the speaker should play the stored music. If playback doesn't start automatically, press the MODE button (No. 10) to enter SD mode.

Recording

Digital Recording

Records audio directly onto a USB or TF memory card (not included). Use for lectures and conferences; does not record audio and speech together. Press and hold the REC key (part of No. 3) for 3-5 seconds to start recording mode, and press briefly to stop. Recording mode is active only in BT/AUX music modes.

Microphone Preference

When activated, the music volume automatically decreases by approximately 20 decibels when you speak into the microphones, allowing your voice to be heard clearly.

Lighting

Party Lighting

The party lighting turns on automatically when the speaker is powered on. Use the LIGHT SWITCH button (part of No. 4) to turn the lighting off.

Indicator Lights

Located on the back of the speaker:

• Green light: The speaker is fully charged.
• Blue light: The speaker is in charging mode.
• Red light: Low battery; charge the speaker.

Remote Control

The IR remote control provides full access to speaker functions:

1. MUTE / MODE: Red key for Mute/Unmute. MODE key switches audio sources: BT / AUX / USB / SD and FM.
2. Channel Keys: 1-9 for selecting stations or tracks.
3. ECHO + EQUALIZER + GUITAR Volume Control: Adjusts these specific volumes.
4. TREBLE Volume Control: Adjusts treble levels.
5. Multimedia Control Panel: Volume + / -, and microphone volume controls.
6. BASS Volume Control: Adjusts bass levels.
7. Playback Keys: Previous song, Pause song, Next song.
8. Function Keys: Microphone Preference, Repeat previous song, Record key.

Technical Specifications

• Power: 1200W
• Audio Frequency Response: 48Hz-20 KHz +/- 3dB
• Sensitivity: 88dB +/- 3dB
• Battery: 12V / 7.5A
• Sound Pressure Level: 105 dB +/- 3dB
• Impedance: 4 Ohms
• Power Source 1: (DC 12V 7500mA) Rechargeable battery
• Power Source 2: (DC 20V 4A) External power supply
• Product Dimensions: 30 * 33 * 86 cm

Common Questions

Why didn't my speaker turn on?

• Check that the external transformer is connected to the back of the device.
• Verify that the external transformer is connected to a power source.
• Ensure the main circuit breaker is in the ON position.

Why is my microphone not working?

• Make sure the microphone is in the ON position.
• Ensure the switch on the back of the speaker is in the ON position and the transmission light is on.
• Confirm that the volume switch is turned to the ON position.

What is the ideal place to place my speaker?

• The speaker should be placed on a smooth and safe surface or on a suitable stand (not included).
• Ensure the speaker is placed in a well-ventilated area.

Is there any action to extend the life of the speaker?

• Yes! If the speaker is not going to be used for an extended period, disconnect it from the power source.
• Fully charge the speaker once a week (allow 4 hours charging time).
• Remove batteries from the microphones at the end of each use.

Is it possible to clean the speaker occasionally?

Yes, it is possible to clean the speaker by wiping with a rag or dry paper towel only!

Warnings

• Do not cover the vents! ⚠️
• Do not place other devices on top of the speaker, such as monitors, computers, amplifiers, etc.!
• Do not place the speaker in a wet area or an area where it may get wet!
• Do not place the speaker in an area of high heat or a place with direct sun exposure!
• Do not use any kind of liquid to clean the speaker, such as water, detergent, soapy water, etc.! Using any of these may cause irreversible damage to the device.

Limited Warranty

Please note that responsibility for the microphones and/or the rechargeable battery is limited to natural defects only. The warranty does not cover damages caused as a result of falls, fractures (external or internal), or contact with fluids. Before confirming replacement or repair of the microphone and/or speaker under warranty, the product will undergo an internal inspection to verify that the fault was not caused by one of the aforementioned issues.

Overcharging: Do not charge the device for more than 4 hours in a row! Faults caused by overcharging are not included in the warranty!