User Manual for edelkrone models including: 81631, Link Adapter, 81631 Link Adapter
Link Adapter
User Manuals - edelkrone
LINK ADAPTER USER'S MANUAL Before operating your edelkrone, please watch the user's manual video from the link below http://edel.kr/lad TABLE OF CONTENTS 1. WHAT'S IN THE BOX & THE BASICS 2. edelkrone SDK SETUP 3. CONNECTIONS 4. LINK HUB 1. WHAT'S IN THE BOX & THE BASICS 2 1 3 4 6 7 8 5 9 2. edelkrone SDK SETUP 1. Download the edelkrone Software Development Kit to your computer from: http://edel.kr/sdk Available for: Windows, macOS and Linux 2. Open the file to install the software. 3. Follow the installation instructions. 4. Open the edelkrone SDK and follow the software's on-screen instructions to connect your Link Adapter to your computer. 1. Link Adapter 2. Adjustment Wheel 3. USB Type B port 4. RJ45 Link port 5. 3.5mm Link port 6. USB Type A to Type C Converter 7. USB Cable Type A to Type B (1.5m) 8. RJ45 Link Cable (2.5m) 9. 3.5mm to 3.5mm Link Cable (3m) For more information and tips about edelkrone SDK, please visit the software page: http://edel.kr/sdk 3. CONNECTIONS After the installation of edelkrone SDK, connect your Link Adapter to your computer via USB cable. If you don't have USB Port on your computer, you can use the USB A to USB C converter that comes with the product. USB A to USB C Converter Link Options You can use the RJ45 Link Port for HeadPLUS v1 and HeadPLUS v1 PRO. You can use the 3.5mm Link Port for edelkrone motion units which includes 3.5mm Link Port. You can connect to the Link Adapter wirelessly with the edelkrone motion units which are only supported by the edelkrone App. You can find edelkrone motion units supported by the ports mentioned above from: http://edel.kr/sdk 4. LINK HUB With the edelkrone Link Hub, you can link up to 5 edelkrone motion control devices with cable connection. Link 1 Link 2 Link 3 Link 4 Link 5 Link 6 All ports can be used as inputs and outputs. (edelkrone Link Hub sold separetely) DISPOSAL OF THE PRODUCT & WARNINGS Should the product become damaged beyond repair, or if you wish to dispose of it, it must be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Observe the regulations of your area and country that relate to the disposal of electronic products. * Keep your Link Adapter away from all sorts of liquids. * Do not attempt to disassemble or modify any internal parts of your Link Adapter. If the device appears to be malfunctioning, discontinue use immediately and contact support for qualified service. * Never force a different type of connector into a port. * Never use or store your Link Adapter in areas subject to extreme temperatures, or high levels of vibration. * Environmental factors may affect your Link Adapter's performance. Keep your product away from environmental hazards such as dust or heavy resonance. Do not use chemical materials to clean your product. * Avoid dropping or causing physical damage to your Link Adapter. * Do not place heavy objects on top of your Link Adapter. **edelkrone cannot be held responsible for damage caused by improper use or modification of the product. * Rated Voltage: 5V Rated Current: 1A Operating Temperature: -5°C to +45°C For more information and tips about your Link Adapter, please watch the user's manual videos at: http://edel.kr/ladAdobe PDF library 16.03