Capello Power Tray

Introduction

I remember lying in bed, 8 or 9 years old, staring at a dull black alarm clock and wondering who created it? That curiosity stuck with me and years later, as a designer, I was still questioning why alarm clocks were mostly boring black boxes? I came up with ideas with different shapes and finishes and shared them with others who were able to help bring them to life and make them available for everyone to enjoy. That's why Capello was started over 10 years ago.

Thank you for choosing one of Capello's designs. We hope it will be a delightful bedside companion as you fall asleep each night and wake up each morning to a new day.

Sweet dreams with Power Tray, Matthew

Product Overview and Features

The Capello Power Tray (CA-55W) is a versatile bedside device featuring:

• Dual alarms with snooze functionality
• Dimmable time display
• Ambient nightlight with sleep timer
• Qi Wireless phone charger
• USB Type-C charging port
• Backup battery for alarm, temporary time display, and settings save

Installation

Plug the AC/DC power cord into an AC wall outlet and then plug the other side into the back of the Power Tray. The Power Tray will turn on and is now ready to use.

Setting Time

1. On the back of the Power Tray, press the time set button ⏱️ until the time flashes. Release the time set button ⏱️.
2. Press the HR and MIN buttons to set the time. You can tap or hold down to change the time faster. As you cycle through 1-12, the hours will change from AM to PM. An amber light indicates AM, and a blue light indicates PM.
3. Press the time set button ⏱️ again to exit the setup. If no key is pressed for about 10 seconds, it will automatically exit the setup and save the time setting.

Adjusting Display & Ambient Nightlight Brightness

Tap the Brightness button ? on the back of the Power Tray to adjust the brightness of the time display and nightlight.

Setting the Alarm

1. Press and hold the alarm button ? until the display flashes, then release the ? button.
2. Press HR and MIN to set the alarm time. Similar to setting the clock time, an amber light indicates AM and a blue light indicates PM.
3. Press the ? button again; "05" will flash. To set the snooze duration, press MIN to select 5, 15, or 30 minutes.
4. Press the ? button to exit the setup. If no key is pressed for about 10 seconds, it will automatically exit the setup.

Repeat the same procedure using the other ? button to set Alarm 2.

Using the Alarm

1. Press the ? button once to activate the alarm. A green LED will light up to the left of the time display.
2. Press the ? button again to turn the alarm off. The green LED will turn off.

Repeat the same procedure using the other ? button to use Alarm 2.

Note: The snooze duration is set during the alarm setup.

Note: The Alarm 1 green LED is to the left of the time display, and the Alarm 2 green LED is below it.

When the Alarm Sounds

To snooze, press down on the top of the Power Tray. Ensure the Power Tray is sitting flat on a nightstand, dresser, desk, or other hard surface.

The snooze duration is set during the alarm setup.

To stop the alarm and reset it to sound again tomorrow, press any button on the Power Tray (besides the snooze button). The alarm chime will stop, and the alarm will be set to sound again tomorrow.

Using the Ambient Nightlight

1. Press down on the top of the Power Tray to turn on the nightlight. Ensure the Power Tray is sitting flat on a nightstand, dresser, desk, or other hard surface.
2. To activate the nightlight sleep timer, press down again on the top of the Power Tray to select between 20 minutes, 1 hour, and 2 hours.
3. Press down on the top of the Power Tray to turn the light off (5 seconds after the top has not been pressed).

Note: Tap the Brightness button ? on the back of the Power Tray to adjust the brightness of the time and nightlight.

Qi Wireless Charging

1. Place your wireless device on top of the Power Tray. Charging will start automatically.
2. When your device is charging, the LED indicator to the left of the time display will light green.

Note: The Power Tray has a protective circuit that detects when a device is not Qi compatible or if a metal object is placed on the charging pad. It will disable power to the charger as a safety precaution. When the safety is triggered, the LED indicator will flash red.

Note: Wireless charging works with Qi devices including iPhone 8 and newer devices, and many Android phones.

Note: If your phone is in a case and not charging, try removing it from the case to charge wirelessly.

USB Type-C Charging

The Power Tray features a USB Type-C (1A power) charging port on the back to charge many USB rechargeable devices, including iPhone, iPad, AirPod, e-readers, digital cameras, and more.

1. Connect a USB Type-C charging cable (not included) to the port on the back of the Power Tray.
2. Connect the other end of the cable to your rechargeable device.

Backup Battery Operation

With backup batteries installed, if there is a power failure or the clock is unplugged:

• The display will turn off.
• Pressing down on the top of the Power Tray will turn the display on for a few seconds to see the time.
• The alarms will still sound.
• The time and alarm settings will be saved.
• The nightlight will not work when running from the backup batteries.

Backup Battery Installation

1. Remove the battery cover on the bottom of the Power Tray.
2. Insert 2X AAA batteries (not included) with the "+" and "-" ends of the battery aligned as indicated (the "-" side of the battery touches the contact springs).
3. Replace the battery cover.

Note: When backup batteries are installed and running low on power, the low battery icon on the display will flash. If the batteries are completely dead, the battery icon will stay lit. If no batteries are installed, the battery icon will not be displayed.

Note: Do not mix old and new batteries. Do not mix alkaline, standard, and rechargeable batteries. Alkaline batteries are recommended.

Troubleshooting

If the Power Tray is not functioning properly, it may be caused by electro-static discharge or other interference. Unplug the DC jack and remove backup batteries, then plug the DC jack back into the clock. Reinstall the backup batteries after 10 seconds. The Power Tray will reset to default settings, and you will need to set the time and alarm again.

Contact customer support at support@hellocapello.com.

Product Care

1. Place the Power Tray away from areas with direct sunlight, excessive heat, or moisture.
2. Protect your furniture when placing the Power Tray on a natural wood and lacquered finish by using a cloth or protective material between it and the furniture.
3. Clean the Power Tray with a soft cloth moistened only with mild soap and water. Stronger agents such as Benzine, thinner, or similar materials can damage the surface of the unit.
4. Do not use old or used batteries in the Power Tray.
5. If the Power Tray is not to be used for over a month or longer, remove the batteries to prevent possible corrosion. If the battery compartment becomes corroded or dirty, clean the compartment and replace with new batteries.

Limited 90 Day Warranty Information

Koda Electronics (HK) Co., Ltd warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.

If you are experiencing any problems with the operation or function of your product, please ensure you have downloaded the full owners manual from the Koda Electronics website or email support@hellocapello.com for additional troubleshooting assistance. Should this fail to resolve the matter and service is still required due to any defect or malfunction during the warranty period, Koda will repair or, at its discretion, replace this product without charge. This decision is subject to verification of the defect or malfunction upon delivery of this product to a designated factory service center. The product must include proof of purchase, including the date of purchase.

Before returning this product for service:

1. Contact customer service to receive a Return Authorization number (RA#).
2. Remove the batteries (if applicable) and pack the unit in a well-padded, heavy corrugated box.
3. Enclose a photocopy of your sales receipt, credit card statement, or other proof of original date of purchase, if within the warranty period.
4. Write the issued RA# on the top of the shipping box.
5. Ship the package from a shipping company of your choice, prepaid and insured, to the Koda Service Center address supplied by the Customer Service Representative. Be sure to save your tracking number.

Disclaimer of Warranty

This warranty is valid only if the product is used for the purpose for which it was designed. It does NOT cover:

• Products damaged by negligence or willful actions, misuse, or accident, or which have been modified or repaired by unauthorized persons.
• Cracked or broken cabinets, or units damaged by excessive heat.
• Damage to digital media players.
• The cost of shipping this product to the Consumer Repair Department.

This warranty is valid only in the United States of America and does not extend to owners of the product other than the original purchaser. In no event will Koda or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members, or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary, or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your Capello product.

For customer support, please e-mail us at: clocks@hellocapello.com

Questions? Visit www.hellocapello.com

FCC Disclaimer

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Supplier's Declaration of Conformity

MODEL: Power Tray

Number: CA-55W

Responsible party: BIA Electronics, LLC.

107E Beacon Street, Ste. A

Alhambra, CA 91801

email: support@hellocapello.com

Compliance information: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limit set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Questions?

If you have any questions or issues, please reach out at hellocapello.com so we can help you out.

support@hellocapello.com

Enjoying Power Tray?

If you're enjoying your Power Tray, consider supporting Capello by sharing a review to let other customers know that it may be a good option for them too.

https://www.target.com/b/capello/-/N-562z2