TP-Link Range Extender Quick Installation Guide

1. Power On

Plug the extender into a power outlet next to your router. Wait until its Power LED turns solid on.

Image Description: A diagram showing the TP-Link Range Extender plugged into a wall outlet next to a router. An arrow indicates plugging it in, and text points to the solid power LED.

Need setup videos? Scan the QR code, or visit https://www.tp-link.com/support/setup-video/ and search for the setup video of your model.

2. Set Up

Choose one of the following methods:

3. Relocate

1. Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location must be within the range of your router.
2. Wait for about 2 minutes until the LED turns solid green. If it doesn't, relocate the extender closer to the router to achieve better signal quality.

Image Description: A diagram illustrating optimal placement of the extender halfway between the router and the device experiencing poor Wi-Fi. It shows a 'Solid Green' LED indicating a suitable location and a 'Red' LED indicating the extender is too far from the router.

Tip: For a more intuitive location assistant, access extender settings via the Tether app and go to Tools > Location Assistant.

Enjoy the internet!

Note: If you cannot find the network names with '_EXT' in your Wi-Fi network list, this means the extender has been connected to a OneMesh router and automatically copied its Wi-Fi settings. See back for more information.

Manage the Extender

After setup, you can manage the extender via the Tether App or a Web Browser.

Note: If your extender and router use the same network name, Method 1 (Tether App) is recommended.

Method 1: Via the Tether App

1. Connect your smartphone to the extender's or router's network.
2. Launch the Tether app, select your extender, and log in.
3. Manage the extender as needed.

Method 2: Via a Web Browser

1. Connect your computer or smartphone to the extender's network. If using a computer, unplug any Ethernet cable.
2. Launch a web browser, enter http://tplinkrepeater.net in the address bar, and log in.
3. Manage the extender as needed.

LED Explanation

OneMesh™ with Seamless Roaming

TP-Link OneMesh routers and extenders work together to form one unified Wi-Fi network. Walk through your home and stay connected with the fastest possible speeds thanks to OneMesh's seamless coverage.

Unified Wi-Fi Network

Router and extenders share the same wireless settings, including network name, password, access control settings, and more.

Seamless Roaming

Devices automatically switch between your router and extenders as you move through your home for the fastest possible speeds.

Easy Setup and Management

Set up a OneMesh network with a push of WPS buttons. Manage all network devices on the Tether app or at your router's web management page.

To check the full list of TP-Link OneMesh devices, scan the QR code, or visit https://www.tp-link.com/One-Mesh/compatibility.

FAQ (Frequently Asked Questions)

Q1. What should I do if I cannot access the extender's web management page?

• Make sure your computer or smartphone has connected to the extender's network, and not that of your router. If your router and extender share the same network name, connect your computer to the extender via an Ethernet cable, or use the Tether app.
• If you are using a computer, make sure it is set to obtain an IP address and DNS server address automatically.
• Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the web browser and press Enter. Note that http://192.168.0.254 applies only for extenders with factory default settings.
• Use another web browser and try again.
• Reboot or reset the extender and try again.
• If you are still having problems, contact TP-Link technical support.

Q2. What should I do if the LED doesn't turn solid on after completing setup via the Tether app or web browser?

• You may have entered incorrect Wi-Fi passwords for your host networks during the configuration. Check the passwords and try again.
• Make sure the extender is close to your router, preferably within 16 feet, and away from large electrical appliances.
• If you have enabled wireless MAC filtering, wireless access control, or access control list (ACL) on your router, disable them first, then follow any method on the front page to complete the configuration.
• Try setting up via the WPS button.
• Reset the extender and go through the configuration again.
• If you are still having problems, contact TP-Link technical support.

Q3. How do I reset the extender?

• With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.

Safety Information

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

For technical support, the user guide, and other information, please visit https://www.tp-link.com/support/, or scan the QR code.