ClimaRad | Solution for the necessary energy transition
Instruction Manual for ClimaRad models including: S-Fan 4-Position Switch, S-Fan, 4-Position Switch, Switch
Jul 22, 2023 — However, the automatic control can be manually overridden by the. I, II, III, O (low, medium, high and pause) mode. The comfort button ( ) and heating ...
| ClimaRad
File Info : application/pdf, 1 Pages, 1.37MB
DocumentDocumentOperating instructions 4-position switch S-Fan Description and application Using the wireless RF 4-position switch, your ClimaRad S-Fan can be operated manually. By default, the ClimaRad S-Fan operates fully automatically (AUTO mode). However, the automatic control can be manually overridden by the I, II, III, O (low, medium, high and pause) mode. The comfort button ( ) and heating button ( ) have no function, only I,II,III,O on an S-Fan+ are these buttons enabled. 4-position switch S-Fan Setting options and operation of 4-position switch ClimaRad S-Fan Button AUTO I II III O I,II,II,O + number of press 1 1 2 3 4 1 duration <1s <1s <1s <1s <1s 3-6 s action automatic low setting middle position high setting pause no function no function connect modus If a button is pressed longer than indicated, no action is performed and the switch switches to standby to conserve battery power. LED colour flashing green 1x green 2x orange 1x orange 2x red 1x of 2x description mode changed/normal operation link with S-Fan successful low battery/start-up S-Fan displays message 'filter dirty' Contact corporation/landlord After using the switch correctly, the LED results are displayed, as described in the table opposite. 2023.001 ClimaRad B.V. - Lübeckstraat 25 - 7575 EE - Oldenzaal - NL - info@climarad.com - www.climarad.nl/en - tel. +31 541 358130