User Manual for Kinan models including: HD1102, 2 Port HDMI Audio KVM Switch, HDMI Audio KVM Switch, KVM Switch, HD1102, Switch
Kinan HD1102 | 2 Port | HDMI | KVM switch ราคาคุยกันได้ - kvmautobot
2 Port HDMI KVM switch
2 Port HDMI / Audio KVM Switch User Manual @Copy Right: Shenzhen Kinan Technology Co., Ltd. Print Date: 2021/11 Version: V1.3 HD1102 User Manual Product Description HD1102 is HDMI KVM switch which support 4K high definition video and USB 2.0. User can switch the computer simply and quickly with the hotkey Scroll-Lock or the button Product Features One HD1102 controls 2 HDMI computers or HDMI devices Support audio Support USB2.0 HUB Multiplatform support WindowsLinuxMac, Unix Easy switching between PCs via front panel pushbuttons, keyboard hotkeys Hot pluggable add or remove computers without having to power down the switch Superior resolution - 3840×2160 @ 60 Hz Supports widescreen resolutions -1- HD1102 Connection Diagram User Manual * If the console display has built-in speakers and audio is supported via the HDMI interface, there is no need to use separate speakers. -2- HD1102 User Manual Hotkey Operation Instructions PressScroll-Lock key twice (Time interval within 2S) to enter the hotkey command mode, if no key is pressed within two seconds of the keyboard hotkey mode, the keyboard will exit the hotkey mode Hotkey Operation Description Scroll-Lock+Scroll-Lock + 1~2 Switch between port 1 and port 2. e.g.: Press Scroll-Lock twice + 2 to switch to port 2 Scroll-Lock+Scroll-Lock+ / Switch to the previous PC/ next PC. Press the Scroll-Locktwice+S to active the Auto Scan Mode, Scroll-Lock+Scroll-Lock+S press any key to quit the mode. Move the mouse to increase the time scale. Scroll-Lock+Scroll-Lock+T Set auto scan time: +5~99+Enter Auto scan interval: 5~99s Press Scroll-Lock twice + F Scroll-Lock+Scroll-Lock+F to enter the hotkey circling mode: Scroll-LockL_Ctrl Scroll-Lock Scroll-Lock+Scroll-Lock+A Press Scroll-Lock to lock / unlock audio. twice +A Press Scroll-Lock Scroll-Lock+Scroll-Lock+U twice +U to lock / unlock the USB3.0. Scroll-Lock+Scroll-Lock+R Press Scroll-Lock twice + to restore factory settings R -3- HD1102 Specifications Model Computer Connection Port Selection Console Monitor Keyboard Mouse Mic Connector PC Speaker Monitor Keyboard Mouse Mic Speaker USB2.0 port Switch LEDs Power Port Selection Selected Resolution Power Consumption Power Input Operating Temperature Storage Temperature Humidity Net Weight Dimension (W × D × H) User Manual HD1102 2 Hotkey, button 1* HDMI Type A 1* double layer USB type A 1 * Min stereo port (pink) 1 * Min stereo port (green) 2 * HDMI Type A 2 * USB type B 2 * Min stereo port (pink) 2 * Min stereo port (green) 2 * USB type A 1 * DC socket 1* button 2 (Blue) 3840×2160 @ 60 Hz 2W 5V- 12V DC 0 ~ 50 -20 ~ 60 0~80% RH, non-condensing 0.4kg 185mm × 74mm × 32.5mm -4- HD1102 FQA User Manual No. Issue 1 No display 2 No mouse and keyboard 3 No audio microphone Solution Check whether the USB cable is connected (USB-B connects to the KVM switch, USB-A connects to the PC host) Check whether the monitor is connected to the KVM switch Check whether the monitor and the PC host are in the power-on state, and the monitor is directly connected to the PC host Check whether the USB cable and the DVI signal cable are connected to the same PC host Unplug all the USB cables of port 1 and port 2 respectively and reconnect them one by one If you are using a mechanical keyboard or mouse or a mouse with macros, please use the front USB port to connect Check whether the audio cable, microphone cable, and DVI signal cable are connected to the same PC host Ensure that the audio and microphone devices are in the power-on state Check whether the audio and microphone devices are correctly connected to the KVM switch Check whether the sound card of the PC host has recognized the audio and microphone equipment -5-WPS 文字