Instruction Manual for V-TAC models including: VT-4455 LED Flood Light, VT-4455, LED Flood Light, Flood Light, Light
LED reflektor 100W 115lm/W Premium | LED-DISKONT.cz
LED reflektor 50W 115lm/W Premium | LED-DISKONT.cz
LED reflektor 200W 115lm/W Premium | LED-DISKONT.cz
INSTRUCTION MANUAL LED FLOOD LIGHT NOTE: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach. MULTI-LANGUAGE MANUAL QR CODE Please scan the QR code to access the manual in multiple languages. SKU VT-4455 8844 8845 VT-44101 8846 8847 VT-44201 8848 8849 5740 115° 11480 115° 22960 115° N.W (KGS) MAX MOUNTING HEIGHT PROJECTED AREA (MMP) WIRE LENGTH -20 to +45°C 183.5x169x34mm 0.56 <5 M 31011.5 150mm -20 to +45°C 253.5x242.5x40mm 1.1 <5 M 61473.75 1 M -20 to +45°C 402.5x349.5x44mm 2.8 <5 M 140673.75 1 M *This product contains a light source of energy efficiency class<D>,where <D> shall be replaced by the energy class of the contained light source. INTRODUCTION & WARRANTY Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only. INSTALLATION INSTRUCTION · DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERATURE RANGE. *CON- NECT WITH WATERPROOF CABLE HOUSE ONLY. *ENSURE ELECTRICITY IS SWITCH OFF BEFORE INSTALLATION. · Please do not mount to a surface that is prone to vibrations.* Remove the screw and the bracket afterward. (Figure 1)Before drilling, mark the hole position for fixing the bracket onto the wall (Screw not supplied). (Figure 2) · Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 4) · Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten the screw. (Figure 5) Connect your main cable (HO5RN-F3G1.0mm2 Recommended) with the input lead of our product through the waterproof junction box. Note, the line (-) of the lead. (Need to use the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make sure if the product is working. DISASSEMBLY DIAGRAM (FOR MARKET SURVEILLANCE TEAM ONLY)Adobe PDF library 17.00