The Device
The Vulpes Goods Shoe Dryer is designed to efficiently dry footwear. It features several key components:
Textual Description of Diagram: The device is a shoe dryer with two vertical arms. Each arm features a fastening hook at the top, multiple circular openings for heat outlets along its length, and a coupler section. The base of the unit contains a timer button and an air inlet grille.
- Fastening hook: Place the shoes over the attachment hook. This will keep the shoes in place and maximise the effect of the shoe dryer.
- Heat outlet: Do not cover the heat outlet with any material other than the shoes. Keep the outlet free of dirt, dust, mud, or other large pieces that can cause malfunctions.
- Coupler: Use the couplers to place the shoes higher, providing more ventilation and the possibility to dry multiple shoes.
- Timer button: Choose the desired time depending on the type of shoe. Turn clockwise to set the desired time. If the knob indicates "OFF", the shoe dryer will not turn on. Note: The time may vary based on the humidity and size of the shoe.
- Air inlet: Ensure the air inlet is free and not covered to prevent malfunctioning. Check the inlet regularly for dust or dirt.
Recommended Drying Times (in minutes)
Shoe Type | Washed | Moist/Wet |
---|---|---|
Leather | 60 | 20 |
Sneaker | 100 | 40 |
Boots | 120 | 60 |
User Guide
- Before use, ensure you are using the correct voltage: 220-240V~, 50-60Hz.
- Insert the plug into the socket and turn on the shoe dryer.
- Choose the desired time according to the humidity and shoe type.
- Place the shoes in the correct direction to avoid tipping over.
- Check the shoes regularly to avoid overheating. If your shoes are dry, unplug them immediately.
Characteristics and Application
- Always check your plug before use to avoid shocks and malfunctions.
- Ensure you choose the right power supply (220-240V~, 50-60Hz).
- For fire safety, unplug the shoe dryer when not in use.
- Do not place the shoe dryer in a hot environment to prevent overheating.
- Do not use the shoe dryer in the bathroom.
- Use the shoe dryer on a heat-resistant surface.
- If smoke or vapor develops, stop using it immediately and contact Vulpes Goods.
- Dry the shoes first; do not use the shoe dryer if there is excessive water.
- Do not use chemicals or oils during use.
- Do not use the product in the presence of children. The product should not be operated by children under 16 years of age.
- Do not allow the product to come into contact with rain or water, as this may create an electric shock.
- Do not place the shoe dryer near curtains, animals, or flammable substances/products.
- Use the shoe dryer for shoes and gloves only. Not for other products.
- Prevent stones, leaves, or sand from entering the shoe dryer.
- Do not tape or block the ventilation holes.
- Do not dismantle the shoe dryer without permission, as this will void the warranty.
- If the shoe dryer turns itself off, check the power supply and air intake. The supply may be incorrect or the air inlet blocked.
- Ensure your plug is unplugged before cleaning the shoe dryer.
- Clean the shoe dryer with a soft, dry cloth.
- Do not use chemicals or oils during cleaning.
- After cleaning, place your shoe dryer in a dry place with adequate ventilation.