User Guide for TEXAS INSTRUMENTS models including: LAUNCHXL-CC1352P1, LaunchPad Kit with SimpleLink Wireless MCU
Title: LAUNCHXL-CC1352P1 Quick start guide (Rev. A) Author: Texas Instruments, Incorporated [SWAU108,A ] Subject: Reference Guide Keywords: SWAU108A,SWAU108
TI LaunchPadTM kit with SimpleLinkTM Wireless MCU Microcontroller development kit for rapid prototyping featuring the CC1352P microcontroller PART NO: LAUNCHXL-CC1352P1 LAUNCH YOUR DESIGN START @ dev.ti.com/launchxl-cc1352p1 TI LaunchPadTM kit with SimpleLinkTM Wireless MCU Microcontroller development kit for rapid prototyping featuring the CC1352P microcontroller PART NO: LAUNCHXL-CC1352P1 Pin aligns with LaunchPad pinout standard. 1 3v3 2 A0 DIO23 3 RXD DIO12 4 TXD DIO13 5 DIO22 6 A1 DIO24 7 SPI CLK DIO10 8 9 I2C SCL DIO21 10 I2C SDA DIO5 GND 20 DIO19 PWM1 19 DIO11 SPI CS 18 17 LP RST 16 DIO9 MOSI 15 DIO8 MISO 14 DIO15 BTN1 13 DIO14 BTN2 12 11 21 5V 22 GND 23 A2 DIO25 24 A3 DIO26 25 A4 DIO27 26 RF_SW A5 DIO28 27 RF_SW A6 DIO29 28 RF_SW A7 DIO30 29 30 DIO7 DIO6 DIO20 GRN LED RED LED FLASH CS DIO18 RESET DIO16 DIO17 RTS TMS TCK TDO TDI SWO LAUNCH YOUR DESIGN @ dev.ti.com/launchxl-CC1352P1 © 2018 Texas Instruments Incorporated. The platform bar, SimpleLInk and LaunchPad are trademarks of Texas Instruments. All other trademarks are the property of their respective owners. 40 39 39 37 36 35 34 33 32 31 SWAU108A IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES "AS IS" AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI's products are provided subject to TI's Terms of Sale (www.ti.com/legal/termsofsale.html) or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI's provision of these resources does not expand or otherwise alter TI's applicable warranties or warranty disclaimers for TI products. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2020, Texas Instruments IncorporatedCorelDRAW 2018 iText 2.1.7 by 1T3XT