User Guide for KONFTEL models including: Cam20, Cam20 USB Conference Camera, USB Conference Camera, Conference Camera, Camera
Vergadercamera Konftel CAM20 - Lichtgeluidhuren.nl
File Info : application/pdf, 9 Pages, 129.40KB
DocumentDocumentKONFTEL.COM USER GUIDE Konftel Cam20 SAFETY PRECAUTIONS Carefull installation This product should be placed stable and securely. The product should not come in contact with any liquid, gas or solid material that may cause corrosion to the shell. Unauthorized disassembly This product has no parts which can be repaired by the user. Damage caused by the user's own disassembly is not covered by warranty. Warning! Electromagnetic fields at specific frequencies may affect the image. Warning! Do not expose the Konftel Cam20 to water or moisture. Warning! Do not open the casing of the Konftel Cam20. Konftel AB hereby declares that this conference camera is in conformity with all the essential requirements and other relevant provisions of Directive 1999/5/EC. Please visit www.konftel.com to view the complete declaration of conformity. 2 TABLE OF CONTENTS Packing list 4 Installation 5 Remote control 6-7 Service and Warranty 8 3 PACKING LIST Konftel Cam20 Remote Control 2x Batteries AAA USB Cable Quick Guide Safety declaration 4 INSTALL ATION USB 3.0 HDMI cable (not included) 5 USB cable REMOTE CONTROL 1 CAMERA SELECT 1 2 3 4 10 STD REV 2 3 11 12 PRESET RESET 4 13 5 14 6 15 7 16 8 17 9 6 REMOTE CONTROL No. Name 1 Standby Button 2 Position Buttons 3 * Button 4 Set Preset Button 5 Pan-Tilt Control Button 6 Back Button 7 Zoom Buttons 8 Set Pan Left/Right 9 Focus Buttons 10 Camera Select Buttons 11 # Button 12 Set Camera IR Address Buttons Function Description Enter into standby mode (not supported) To set preset or call preset Used with other buttons Store a preset position. [PRESET] + Numeric button (0-9): Setting a corresponding numeric key preset position. Press [HOME] back to the middle position. Press to return to previous Slow Zoom: Zoom In [+] or Zoom Out [-] slowly Fast Zoom: Zoom In [+] or Zoom Out [-] fast Setting the direction of the pan. · Simultaneously press [L/R SET] + 1 [STD]: set the pan turn the same direction as the L/R Set. · Simultaneously press [L/R SET] + 2 [REV]: set the pan turn the opposite direction as the L/R Set. Used for focus adjustment. Press [AUTO] to adjust the focuses on the center of the object automatically. Press [MANUAL] to adjust the focus on the center of the object manually. Adjust it with [FAR] (Focus on far object) and [NEAR] (Focus on near object). Press the button corresponding to the camera you want to operate with the remote controller. Used with other buttons [*]+[#]+[F1]: Address 1 [*]+[#]+[F2]: Address 2 [*]+[#]+[F3]: Address 3 [*]+[#]+[F4]: Address 4 13 Clear Preset Buttons Clear preset: Erase a preset position. [RESET] + Numeric button (0-9) 14 Pan/Tilt Control Buttons Press arrow buttons to perform panning and tilting. Press [HOME] button to return to original position. 15 Menu Button Press [MENU] to enter or exit menu. BLC (Backlight 16 Compensation) ON/OFF Button Press [BLC ON/OFF] to enable the backlight compensation. Press it again to disable the backlight compensation. NOTE: · Effective only in auto exposure mode. · If a light is behind the subject, the subject will become dark. In this case, press the [BACKLIGHT ON/OFF] button. To cancel this function, press [BACKLIGHT ON/OFF] button. 17 PTZ Reset Button Not supported 7 SERVICE AND WARRANTY Warranty We give a two-year warranty on our conference devices. Service Service is offered after the expiration of the warranty. Please contact your reseller and ask for a cost estimate. Konftel support If you have any questions about the warranty and service, please contact your Konftel support centre. Europe: +44 1483 308 003 (Monday-Friday 8.00 AM-5.00 PM GMT-1) +46(0)90-706 489 (MondayFriday 8.0017.00 GMT+1) E-mail: support@konftel.com Website: www.konftel.com/contact-support USA and Canada: +1 866-606-4728 (MondayFriday 08.0017.00 GMT-8) E-mail: support@konftel.com Website: www.konftel.com/contact-support 8 931201001-UG-ENG-R1B KONFTEL.COM Konftel is a leading company within collaboration endpoint solutions. Since 1988, our mission has been to help people in businesses around the world to have meetings regardless of distance. Based on our success, we know that remote collaboration is a smooth way to save time, money and at the same time contribute to a more sustainable world. Crystal clear audio and a sharp video image are essential for efficient meetings, this is why we only focus on cutting-edge technology in our Collaboration Solutions. Our audio technology OmniSound® is built into all Konftel Conference phones and devices. The products are sold globally under the Konftel brand and our headquarter is based in Sweden. Read more about the company and our products at konftel.com. Konftel AB, Box 268, SE-901 06 Umeå, Sweden Tel: +46 90 70 64 89 E-mail: info@konftel.com