ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

LIFEPAK 15 Performance Inspection Procedure

This document outlines the Performance Inspection Procedure (PIP) for the Stryker LIFEPAK 15 Monitor/Defibrillator. It provides a comprehensive set of manual test procedures designed for an operational, closed-case evaluation of the device. The PIP ensures the defibrillator operates within its specified requirements and is crucial for maintaining device integrity.

The procedure should be performed as part of a regular preventive maintenance schedule, or following any repair, replacement, or calibration. A checklist is available to assist in recording test results.

Details test procedures for evaluating the LIFEPAK 15 defibrillator.
Specifies necessary test equipment and requirements.
Guides users through various functional and performance checks.
Aims to ensure the device meets operational specifications.

Models: 15, V4-IMX6 Lifepak 15 Monitor Defibrillator, V4-IMX6, Lifepak 15 Monitor Defibrillator, Monitor Defibrillator, Defibrillator

File Info : application/pdf, 101 Pages, 4.68MB

3207841-000 AN PIP MANUAL LP15

References

Microsoft Word for Microsoft 365

Related Documents

	LIFEPAK 15 Test Calibration Procedure (TCP) Detailed procedures for testing and calibrating the Stryker LIFEPAK 15 monitor/defibrillator, covering equipment requirements, setup, and specific calibration tests for defibrillator energy, output waveform, isolation, CO2, printer, and pacing.
	LIFEPAK 35 Monitor/Defibrillator Performance Inspection Procedure This document outlines the Performance Inspection Procedure (PIP) for the LIFEPAK 35 monitor/defibrillator. It details the manual and computer-assisted tests required for service personnel to evaluate the device's operational status and ensure it meets required specifications. The procedure covers equipment requirements, test setups, and specific testing protocols for various device functions.
	LIFEPAK 15 Test Calibration Procedure (TCP) - Stryker Comprehensive guide detailing the Test Calibration Procedures (TCP) for the Stryker LIFEPAK 15 monitor/defibrillator. Covers essential steps for calibration, including setup, energy tests, waveform analysis, isolation tests, CO2 calibration, printer calibration, and pacer tests.
	LIFEPAK 15 Test Calibration Procedure (TCP) Detailed guide for performing Test Calibration Procedures (TCP) on the LIFEPAK 15 monitor/defibrillator, covering setup, energy tests, waveform analysis, isolation tests, CO2 calibration, printer calibration, and pacing tests.
	LIFEPAK 35 Monitor/Defibrillator Test Calibration Procedure (TCP) - Stryker Detailed instructions for performing Test and Calibration Procedures (TCP) on the Stryker LIFEPAK 35 monitor/defibrillator, covering equipment, setup, and specific calibration tests for defibrillator energy, output waveform, and CO2 module.
	Stryker LIFEPAK 15 V2 Service Parts List and Repair Kits This document provides a comprehensive list of service parts and repair kits for the Stryker LIFEPAK 15 V2 monitor/defibrillator, including cross-references to reference designators and part/catalog numbers.
	Stryker LIFEPAK 35 Monitor/Defibrillator Operating Instructions Comprehensive operating instructions for the Stryker LIFEPAK 35 monitor/defibrillator, covering its features, functions, safety information, and maintenance.
	Stryker LIFEPAK 35 Technical Bulletin: Troubleshooting and Service Guide This technical bulletin from Stryker provides essential troubleshooting steps, part information, and service guidance for the LIFEPAK 35 patient monitor and defibrillator, aimed at field service and depot technicians.