Instruction Manual for HALO models including: E235474, 1000 Portable Power Station
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful.
SAFETY PRECAUTIONS DANGER-CAUTION Read and understand all safety information before using this product. Failure to follow these instructions may
File Info : application/pdf, 15 Pages, 7.21MB
DocumentDocumentPOWER STATION 1000 PLEASE READ BEFORE OPERATING THIS EQUIPMENT SAFETY PRECAUTIONS DANGER-CAUTION Read and understand all safety information before using this product. Failure to follow these instructions may result in electrical shock, explosion, fire which may result in serious injuries, death or property damage. · Read all instructions before using the product. · Do not get your HALO POWER STATION 1000 wet or store in extreme temperature conditions. · Do not disassemble or attempt to repair your HALO POWER STATION 1000 yourself. · Use a cloth to clean the exterior of your HALO POWER STATION 1000. Do not use liquid detergent or chemicals of any kind. · When used correctly, lithium- ion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire or explosion, causing personal injury or damage to other devices. · Misusing or incorrectly connecting your HALO POWER STATION 1000 may cause electric shock to users and damage equipment. · Keep your HALO POWER STATION 1000 dry and away from moisture and corrosive materials. The HALO POWER STATION 1000 should not be used near water or wet areas such as bathtubs, showers, bathrooms, sinks, swimming pools or basements. · Do not expose your HALO POWER STATION 1000 to moisture, water, rain, or snow. · Keep your HALO POWER STATION 1000 away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that product heat. · The lithium-ion rechargeable battery used in this charging device may present a risk of fire or chemical burn if mistreated. Do not expose to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate. · Your HALO POWER STATION 1000 may become warm under extended high power operation. Do not cover, wrap, or otherwise restrict the HALO POWER STATION 1000 during operation. WWW.BESTHALO.COM | 2 · In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher. · Do not disassemble your HALO POWER STATION 1000. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard. · Do not drop or subject to strong impacts. Do not operate your HALO POWER STATION 1000 if it has received a sharp blow, or has otherwise been damaged in any way. · Do not puncture, crush or subject to mechanical shock. · Only charge your HALO POWER STATION 1000 by the specified method with the specified charging adapter provided with the unit. · Do not use any non-HALO-branded accessories with the HALO POWER STATION 1000. Doing so may cause electric shock to users and damage equipment. · The HALO POWER STATION 1000, along with its accessories, are not toys and should be kept away from children. · Do not insert any foreign object into the ports or openings of your HALO POWER STATION 1000. · Do not clean your HALO POWER STATION 1000 with harsh chemicals, soaps or detergents. Just wipe the case with a soft cloth. · Do not modify or attempt to repair the HALO POWER STATION 1000 except as indicated in the instructions for use and care. · Make sure the HALO POWER STATION 1000's charging ports do not become contaminated with lint or other debris. · Batteries should be recycled or disposed of as per state and local guidelines. · The device shall be stored indoors and protected from the elements; · When in use, steps should be taken to prevent the exposure to rain, sleet, snow, and the like. · For appliance and battery storage, do not exceed 104°F (40°C) · Do not operate in explosive atmospheres such as in the presence of flammable liquids, gases or dust. 3 | POWER YOUR LIFE TABLE OF CONTENTS Safety Precaution Included Items Operating Instructions Troubleshooting Guide Specifications Warranty and Contact Information 2-3 5 6-11 10-11 12 14-15 WWW.BESTHALO.COM | 4 INCLUDED ITEMS - HALO POWER STATION 1000 - 90W Wall Charging Adapter 21 4 3 5 6 7 8 9 10 11 12 13 14 15 LOCATION OF CONTROLS 1. LCD Screen ON/OFF Button 2. LCD Screen 3. DC Input Indicator 4. 12-24VDC Input 5. USB Output ON/OFF Button 6. USB-C PD Input/Output Port 7. USB-A Output Ports 8. 110VAC Output Ports 9. DC Output ON/OFF Button 5 | POWER YOUR LIFE 10. 12V DC Output Socket 11. 12V DC 5525 Output Ports 12. AC Output ON/OFF Button 13. Floodlight ON/OFF Button 14. Floodlight 15. Wall Charging Adapter OPERATING INSTRUCTIONS Please make sure to fully charge the HALO POWER STATION 1000 before first use. CHARGING THE HALO POWER STATION 1000 Using the AC Wall Charging Adapter: Use the provided AC Wall Charging Adapter, and plug the AC adapter tip into the 12-24V DC charge input. Next, connect the AC Wall Charging Adapter into a wall outlet. The HALO POWER STATION 1000 will automatically begin charging. When the HALO POWER STATION 1000 is fully charged, all four battery indicator lights will be solid green and the LCD digital display will indicate 100%. When fully charged, disconnect the cable. NOTE: · The HALO POWER STATION 1000 can be charged with the DC input and USB-C input simultaneously. This dual charging will provide a faster recharge times. An optional USB-C PD charging adapter (not included), offers up to 100W of additional input. · The HALO POWER STATION 1000 can also be charged via solar panel (not included) and car charger (not included). · The HALO POWER STATION 1000 can be charged and discharged simultaneously. · Recharge times will vary based on the charging method used. The maximum power input using simultaneous DC and USB-Type C charging is 300W. The total charge time with a 300W input is less than 5 hours. BUTTON OPERATIONS LCD Button: Check the battery level by pressing the LCD button. To turn on/off the LCD display, simply press the LCD button. The LCD display will automatically turn off after 15 seconds if nothing is connected to the WWW.BESTHALO.COM | 6 output ports. USB Output ON/OFF Button: To turn ON, press USB Output ON/OFF Button. The USB Ports Output LED will light up and the LCD Screen will turn on. To turn OFF, press the USB Output ON/OFF Button. DC Output ON/OFF Button: To turn ON, press DC ON/OFF Button. The DC Output Indicator will light up and the LCD Screen will turn on. To turn OFF, press the DC ON/OFF Button. AC ON/OFF Button: To turn ON, press the AC ON/OFF Button. The AC Output Indicator will light up and the LCD Screen will turn on. To turn OFF, press the AC ON/OFF Button. NOTE: · To preserve the battery, turn off the DC, USB and AC outputs when the product is not in use. CONNECTING YOUR ELECTRONIC DEVICES, EQUIPMENT AND APPLIANCES The HALO POWER STATION 1000 is compatible with AC and DC electronic devices, equipment and appliances where portable, stationary, or emergency power is required. HOME WORK POWER OUTAGE SCHOOL TRAVEL CAMPING 7 | POWER YOUR LIFE TOOLS OUTDOORS There are several ways to power and charge electronic devices with the HALO POWER STATION 1000. Both AC and DC Output Ports can be used simultaneously. Using the 110V AC Output Ports: The HALO POWER STATION 1000 can be used to power your 110V AC electronic devices, equipment and appliances rated for 1000Watts or less. To begin, connect the AC power plug from your device/equipment/appliance into the AC Output Port of the HALO POWER STATION 1000. Then press the AC ON/OFF Button. NOTE: · Make sure the AC Power Plug is fully plugged into the AC Output Port. · The HALO POWER STATION 1000 will provide up to 2000Watts surge power for a short duration. Using the USB Ports: The HALO POWER STATION 1000 is compatible with any USB charging cable. To begin, press the USB ON/OFF Button, then plug the standard USB end of the cable into any of the 5V/2.4A USB Output Ports. Connect the tip into the input of your electronic device to begin charging. For PD (Power Delivery) Output, use a USB-C to USB-C cable (not included) to charge your compatible electronic devices. HALO USB Smart Charge Technology Your HALO POWER STATION 1000 contains the HALO USB SMART CHARGE TECHNOLOGY to achieve higher compatibility for charging USB electronic devices. The HALO USB SMART CHARGE TECHNOLOGY will allow the HALO POWER STATION 1000 to communicate with your electronic device and provide the fastest and safest charge for that device. WWW.BESTHALO.COM | 8 Using the 12V DC Power Socket and 5525 Output Ports The HALO POWER STATION 1000 can be used to power your 12V DC electronic devices, equipment and appliances. To begin, connect your 12V compatible device/equipment/appliance into the Power Socket or 5525 Output Port(s). Then press the DC ON/OFF Button. USING YOUR HALO POWER STATION 1000 FLOODLIGHT Press the Floodlight ON/OFF Button once to turn ON. Press the Floodlight ON/OFF Button twice to turn 50% brightness. Press the Floodlight ON/OFF Button three times to turn 100% brightness. Press the Floodlight ON/OFF Button four times to turn OFF. Double Click the Floodlight ON/OFF button to turn on SOS mode light. Press the button again to turn off SOS mode light. 9 | POWER YOUR LIFE TROUBLESHOOTING If the HALO POWER STATION 1000 cannot charge or power devices, please check the following steps: · Make sure the appropriate DC, USB or AC output is turned on and that the LED buttons are green. · Check the battery capacity. If it is lower than 3%, please recharge the HALO POWER STATION 1000. · Make sure the power consumption does not exceed the rated power of the port. · If an error is observed, refer to the Chart on the next page. · Do not operate the HALO POWER STATION 1000 outside the allowable operating temperature. (0-40°C / 32-100°F) WWW.BESTHALO.COM | 10 Error Codes: Input Overvoltage Protection: The symbol will flash for 5 seconds when an input over voltage condition is detected. Output Overload Protection: The symbol will flash for 5 seconds when an AC output overload condition is detected. Low Power Alarm: The symbol will flash when the power station batter capacity is less than 3%. Low Temperature Alarm: This low temperature symbol will be displayed if the power station is attempted to be used outside the allowable operating temperature. High Temperature Alarm: This high temperature symbol will be displayed if the power station is attempted to be used outside the allowable operating temperature. 11 | POWER YOUR LIFE SPECIFICATIONS AC output DC12V Output Cigarette Lighter DC12V Output (5525) USB-A Output USB-C Output/Input Floodlight Rated voltage Rated power Peak power Frequency Rated voltage Rated current Rated voltage Rated current Rated voltage Rated current PD: 100W Max LUX DC Input voltage DC Input power Rated capacity Battery cell type Working environment condition Size Net weight Output 110V 1000W 2000W 60Hz 13.3V 10A 13.3V 10A 5V 2.4A 5V3A, 9V3A ,12V3A ,15V3A , 20V5A 200/800/1400 Input 12-24 V Max 200W Battery Contains a 1036.8 Wh internal battery General Lithium-ion Relative humidity: 20%-90% Temperature: 32- 104°F (0-40°C) 12.9 x 9.6 x 10.25 inches 22 lbs WWW.BESTHALO.COM | 12 COMPLIANCE WITH FCC REGULATION This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be used with certified peripherals and shielded cables. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception. 13 | POWER YOUR LIFE LIMITED WARRANTY HALO warrants its products to be free from defects in material and workmanship under normal use. For all questions or exchange requests, please call 888-907-6274, contact us at zagg.com/support or visit www.zagg.com/warranty-policies. This Limited Warranty sets forth the full scope of HALO's obligations and liabilities with respect to the product. All implied warranties, including without limitation the implied warranties of merchantability and fitness for a particular purpose, are limited to the duration of this Limited Warranty. In no event shall HALO be liable for any incidental, special, consequential or punitive damages or any damages or losses of or to electronic equipment or products that are used with any of HALO's products. WWW.BESTHALO.COM | 14 FOR TECHNICAL SUPPORT PLEASE CONTACT US AT: ZAGG.COM/SUPPORT OR CALL US AT: 888 907 6274 HALO 910 W LEGACY CENTER WAY STE. 500, MIDVALE, UTAH 84047 WWW.ZAGG.COM/HALO © 2021 ZAGG Inc | www.ZAGG.com/HALO The HALO and H trademarks are the property of ZAGG Inc. All rights reserved. 314-00989-A ZAGG Inc | 910 W Legacy Center Way, Ste. 500, Midvale, Utah 84047 Made in China. BC 5013200Adobe PDF library 15.00 Adobe Illustrator 25.0 (Macintosh)