GEEKOM MINI IT11 Assembly and Safety Guide

Product Overview

The GEEKOM MINI IT11 is a compact computer designed for various computing needs. It supports M.2 SSD and DDR4 memory upgrades.

Front Panel Features:

• Power Button/LED ?
• USB 3.2 Gen2 Port ?
• USB4+DP Port ?
• Consumer Infrared (CIR) ?
• SD Reader ?

Rear Panel Features:

• 19V Power Inlet ⚡
• HDMI Port ?️
• Mini DisplayPort Connector ?️
• Ethernet Port ?
• USB 3.2 Gen2 Port ?
• Anti-Theft Key Lock Hole ?

Assembly Instructions

1. Installing M.2 SSD

Follow these steps to install an M.2 SSD:

1. Remove the bottom cover of the MINI IT11.
2. Locate the M.2 slot.
3. Insert the M.2 SSD into the slot at an angle.
4. Secure the SSD with the provided screw (A).
5. Replace the bottom cover.

2. Installing 1.2V DDR4 RAM

Follow these steps to install DDR4 RAM:

1. Open the clips on the DDR4 slot.
2. Insert the DDR4 module into the slot at an angle.
3. Gently push down the module until it clicks into place.

3. VESA Mounting

To mount the MINI IT11 using a VESA mount:

1. Attach the VESA bracket to the back of the monitor using screws (A).
2. Align the MINI IT11 with the VESA bracket.
3. Secure the MINI IT11 to the bracket using screws (B).

Safety and Caution Information

AC Power Adapter:

• Use only the provided AC adapter. Using a different adapter may cause electric shock, fire, or burns.
• For indoor use in dry locations only.
• Do not open the enclosure. Repairs should only be performed by professionals.
• Connect only to a properly wired and grounded outlet.
• The adapter is rated for use between 0°C and 35°C (32°F and 95°F).

Battery Safety:

• Risk of explosion if the battery is replaced with an incorrect type.
• Recycle batteries where possible. Dispose of used batteries according to local environmental regulations.

Operational Guidelines:

• Failure to use the included power adapter may violate regulatory compliance and pose safety hazards.
• Operating temperature range: 0°C to 35°C (32°F to 95°F). Avoid heat sources, direct sunlight, or extreme temperatures.
• Medical Devices: This device may interfere with pacemakers, hearing aids, or other medical devices. Maintain a separation distance of 20 cm (8 inches) between the device and medical equipment. Consult medical device documentation for specific information.
• Modifications: Unauthorized modifications to the wireless solution, thermal solution, components, or enclosure may violate compliance requirements and create safety hazards.

FCC Compliance:

• This device complies with Part 15 of the FCC Rules.
• Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
• This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations.
• If interference occurs, try reorienting the antenna, increasing separation, connecting to a different outlet, or consulting a technician.
• This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Maintain a minimum distance of 20 cm between the radiator and your body.

Connecting to a Network

To connect to a wireless network:

1. Click the network icon in the notification area in Windows.
2. Select the desired network and input any required information (e.g., Wi-Fi password).

Customer Support

For assistance, please contact GEEKOM support at support@geekompc.com or visit www.geekompc.com.