VANKYO PERFORMANCE V630W USER MANUAL

CONTENTS

• WHAT'S INCLUDED
• NOTICE
• FUNCTION OVERVIEW
• QUICK START
• INPUT SOURCE
• PROJECTOR CONNECTION
• SCREEN MIRRORING
• SETTINGS
• PROJECTION DISTANCE&SIZE
• SPECIFICATION
• TROUBLESHOOTING GUIDE

WHAT'S INCLUDED

The package includes:

• Projector
• Remote (Batteries Not Included)
• User Manual
• Carrying Bag
• HD Cable
• Power Cable

NOTICE

Recommended

Ensure proper ventilation and placement for optimal performance. Avoid blocking air inlets or outlets.

NOT Recommended

Avoid placing the projector in dusty environments, near heat sources, or in enclosed spaces without ventilation.

FUNCTION OVERVIEW

Projector Ports and Buttons

Top/Back Panel: USB, IR, AV In, Audio Out, Speaker, Power Input

Side Panel: Air Outlet, HD 1, HD 2

Bottom Panel: Air Inlet

Remote Control Buttons

Top: Up, Down, Left, Right, OK

Middle: Power Button, Menu, Input Source, Play/Pause

Bottom: Fast Reverse, Volume-, Back, Volume+, Fast Forward

Remote Functions: Power Button, Play/Pause, Fast Reverse, Up, Left, Back, Volume-, Mute, Fast Forward, Right, Down, Input Source, Menu, Volume+

QUICK START

1. Plug the power cord into an outlet.
2. Take off the lens cover.
3. Connect your device to the projector correctly using the appropriate cable (e.g., USB, HD). Original USB cable not included for some connections.
4. Press the Power Button to turn on the projector.
5. Select the correct input source to project your device.
6. Adjust the kickstand accordingly.
7. Adjust the focus ring and keystone to get the best image performance.
8. Press the Power Button twice to turn off the projector.

INPUT SOURCE

Press the Power button on the projector/remote to enter the Input Source interface.

A. HD Connection

Connect your device via HDMI cable to HDMI 1 or HDMI 2 ports.

B. USB Connection

Connect your USB storage device or mobile device to the USB port.

C. AV Connection

Connect your device using an AV cable (not provided) to the AV IN port.

The interface displays options like Media, iOS Cable, HDMI 1, HDMI 2, AV, iOS Cast, Miracast, and Settings.

PROJECTOR CONNECTION

Connect various devices to the projector:

1. USB Device: Connect a USB drive to the USB port.
2. DVD Player/Set-top Box: Connect via HD cable.
3. Speaker/Headphones: Connect to the Audio Out port.
4. Laptop/TV Box: Connect via HD cable or other compatible methods.

SCREEN MIRRORING

For iOS System

Screen Mirroring Wirelessly

1. Connect the projector and your mobile device to the same router's WiFi or directly connect your mobile device to the projector's AP hotspot.
2. Tip: When using the projector's AP hotspot, content will be mirrored via cellular data.
3. Go to Homepage and select 'iOS Cast' to enter the interface.
4. Activate Screen Mirroring/AirPlay Mirroring in the Control Center of your iOS device and search for the projector.
5. Select 'V630W-xxxx' from the searching list. Content on your iOS device will be mirrored on the projection screen/wall after a successful connection.

Screen Mirroring via a Lightning Cable

1. Go to Homepage and select 'iOS Cable' to enter the interface.
2. Connect your mobile device to the USB Port on the projector using the original lightning cable.
3. Select 'Trust' in the pop-up window 'Trust This Computer?' on your iOS device.
4. The contents on your iOS device will be mirrored on the projection screen/wall after a successful connection.

For Android System

Ensure your Android device supports Multi-screen/Smart View/Wireless Display.

1. Go to the WiFi settings of your Android mobile device and switch on the WiFi option. Note: A successful WiFi connection is not mandatory, but ensure the WiFi switch is ON.
2. Go to Homepage and select 'Miracast' to enter the interface.
3. Activate the Multi-screen/Smart View/Wireless Display function on your Android device and search for the projector.
4. Select 'V630W-xxxx' from the searching list. Content on your Android device will be mirrored on the projection screen/wall after a successful connection.

SETTINGS

Press the Menu button to access PICTURE, SOUND, and OPTION settings.

PICTURE Settings

Adjust Contrast, Brightness, Color, Tint, and Sharpness. Options include User mode and presets like Medium, Middle.

SOUND Settings

Adjust Treble and Bass. Options include User mode.

OPTION Settings

View Aspect Ratio (16:9, 4:3, Auto) and Software Upgrade information.

Tips:

• Selecting 'User' in Picture Mode allows fine-tuning of Contrast, Brightness, Color, Tint, and Sharpness.
• Selecting 'User' in Sound Mode allows adjustment of Treble and Bass.
• When using USB or HD connection, Aspect Ratio can be adjusted.

Navigate to Homepage > Settings to connect to WiFi, change language, restore factory settings, change projection mode, and adjust image size.

PROJECTION DISTANCE&SIZE

The recommended projection distance varies with projection content. Adjust the distance between the wall/screen and the projector as needed.

Image Sizes and Corresponding Distances:

• 35" at 4.20ft (1.28m)
• 60" at 7.22ft (2.2m)
• 90" at 10.82ft (3.3m)
• 120" at 14.43ft (4.4m)
• 200" at 23.94ft (7.3m)

Note: Ambient darkness will improve the clarity of the projected images.

SPECIFICATION

TROUBLESHOOTING GUIDE

1. Copyrighted Content: Content from services like Hulu, Netflix may not be mirrored or cast due to copyright restrictions.
2. Watching Copyrighted Content: Use a Fire TV stick, Roku stick, or Chromecast™ (not included) connected to the projector.
3. Blurry Image: Adjust the focus ring/keystone. Ensure the projector and screen/wall are within the effective distance.
4. Remote Unresponsive: Ensure the remote points directly at the IR receiver, do not cover the IR receiver, and replace batteries if needed.
5. Upside Down Images: Go to Homepage > Settings > Projection Setting > Projection Mode to flip the image.
6. Factory Reset: Go to Homepage > Settings > System Setting > Restore Factory Default to reset the projector.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.

L'appareil est conforme aux directives d'exposition aux RF, les utilisateurs peuvent obtenir des informations canadiennes sur l'exposition aux RF et la conformité. La distance minimale du corps pour utiliser l'appareil est de 20cm.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Cet émetteur ne doit pas être colocalisé ou fonctionner en conjonction avec une autre antenne ou un autre émetteur.

Operation of this device in the band 5150-5250 MHz is restricted to indoor use only. Le fonctionnement de cet appareil dans la bande 5150-5250 MHz est limité à une utilisation en intérieur uniquement.

Caution

• To avoid replacement of a battery with an incorrect type.
• Do not dispose of a battery into fire or a hot oven, or mechanically crush or cut a Battery.
• Do not leave a battery in an extremely high temperature surrounding environment.
• To avoid battery subjected to extremely low air pressure.

The mains plug is used as the disconnect device; the disconnect device shall remain readily operable.

Symbol Key:

• The symbol indicates DC voltage
• The symbol indicates AC voltage
• The symbol indicates For indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give this product to a competent recycling organization or the retailer when he buys a new electrical or electronic equipment. This product can be used across EU member states.

The mains plug is used as the disconnect device; the disconnect device shall remain readily operable.

EU Compliance Statement: Shenzhen VanTop Technology & Innovation Co., Ltd. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available online at https://doc.vantop.com/.

In all EU member states, operation of 5150-5250 MHz is restricted to indoor use only.