Introduction
Introducing the Doran Scales, Inc. Model 8600 Digital Weight Indicator. This advanced indicator integrates state-of-the-art technology and software to provide a fully configurable system for most weighing and batching applications. Designed with ease of use and setup in mind, the Model 8600 can be easily configured to perform many functions typically handled by a Programmable Logic Controller.
Key features and capabilities of the Model 8600 include:
- NTEP certification for Class III/IIIL installations up to 10000d
- Large, 0.80" red LED display for clear readability
- Support for lb/kg/oz/g/lb-oz display units
- User-programmable units
- Fully programmable capacities and display graduations
- 21-button, water-resistant touch panel for data entry and recall
- Accumulator functions with 10 independent accumulators and counters
- Setpoint functions with 10 independent setpoint outputs and preacts
- Digital tare function with 10 independent tares
- Configurable duplex serial communications port (RS232, RS485, or 20mA current loop)
- Configurable simplex printer port (RS232 or 20mA current loop)
- Digital keyboard entry of values and calibrations
- EEPROM nonvolatile data storage for calibration and setup information
- Nonvolatile memory for keyboard-entered data (5 years)
- Time and date functions with selectable print formats
- Microprocessor monitoring for failure prevention under severe fault conditions
- Easy field board replacement without recalibration
- Quick Access Cover for easy access to load cell and serial communications
- Support for up to 8 350 ohm load cells
- 115/220 VAC 50/60 Hz selectable operation
- Selectable analog and digital filtering
- 200 Tare/ID truck weigh in/out program
- Robust batching program
- Easy loading of setpoints, tares, and batching programs via duplex port
- Optional DC/Battery operation, Peak and Hold Software Package, Solid State relay outputs, and remote push-button support.
For detailed information on operation, calibration, and troubleshooting, please refer to the full manual. For any questions, contact the Doran Scales Technical Service Department at 1-800-262-6844.
Warranty Information
Doran Scales, Inc. warrants its products against manufacturing defects for a period of two (2) years from the date of shipment. Defective products may be returned, freight prepaid, with prior return authorization for repair or replacement. Doran Scales, Inc. liability is limited to repair or replacement and does not cover consequential or indirect damages resulting from misuse, overload, accidental damage, alteration, improper installation, or unauthorized opening.
To return a product for repair, contact the Doran Scales, Inc. Service Department at 1-800-262-6844 to obtain a Return Material Authorization (RMA) number. Package the equipment in its original shipping carton or a sturdy alternative, clearly marking the package with the RMA number. Ship to:
Doran Scales, Inc.
1315 Paramount Pkwy
Batavia, IL 60510
Attn: Service Department
