Pro Audio Video Manufacturer
User Manual for infobit models including: iTrans B70S HDMI 18Gbps Extender Over Cat5e, iTrans B70S, HDMI 18Gbps Extender Over Cat5e, 18Gbps Extender Over Cat5e, Extender Over Cat5e, Over Cat5e
infobit iTrans B70S
File Info : application/pdf, 12 Pages, 4.34MB
DocumentDocumentiTrans B70S www.infobitav.com info@infobitav.com The extender must use direct interconnection method CAT cable. The extender will go into protection mode automatically and no video out when using cross interconnection method CAT cable. The 18Gbps HDMI Extender is a tool which can extend your HDMI signal over 230fts/70meters to a compatible display. It is designed to convert HDMI signal to standard HDBaseT signal which can be transmitted by LAN cable. It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal, so you can control the Source in the Sink side which is 230fts outside, also you can control the Sink in the Source side which is 230fts outside by using the HDMI Extender. HDMI 2.0b (18Gbps), HDCP 2.2 and DVI compliant Video resolutions up to 4K2K@50/60Hz (YUV444) 10bits HDR (High Dynamic Range) pass through Supports HDMI High Bit Rate(HBR) audio pass through Supports CEC bypass Optical audio supports LPCM 2CH, Dolby Digital 2/5.1CH, DTS 2/5.1CH POC (Power Over Cable) function is supported, either TX or RX is powered by 24V@1A power supply, the another does not need power supply from the DC jack. POC Power consumption is less than 10W. See the description 1 Transfer Bidirectional Infrared control signal together with the HDMI signal. See the description 2. Transfer Bidirectional RS-232 control signal together with the HDMI signal. See the description 3. 3/11 Transmission distance: Over CAT6 cable 70 meters: 1080P @60Hz36bit; 3D1080P@30Hz36bit; 40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 3D1080P@60Hz@36bit; 4K x 2K@30Hz@24bit. 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444) 1 x HDMI 18Gbps Transmitter 1 x HDMI 18Gbps Receiver 2 x Wideband IR Tx 2 x Wideband IR Rx 1 x 24V/1A Power Adaptor 1 x User Manual 4/11 5/11 1 8 9 2 3 4 5 6 7 1 Power LED: System power indicator. 2 DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. 3 HD BaseT Out: Standard HD BaseT signal output port. Connect HDBaseT receiver with a UTP cable following the standard of direct interconnection method 4 HDMI In: Connect this to HDMI source devices such as Blu-ray or PS4 player 5 IR In: Channel 2 IR Receiver. Connect with Wideband IR Rx. 6 IR Out: Channel 1 IR Transmitter. Connect with Wideband IR Tx. 7 RS-232: Phoenix jack provide Serial port control signal between transmitter and receiver. 6/11 8 Connection Signal Indicator Lamp Illuminate: The Transmitter and Receiver are in good connections status. Flashing: The Transmitter and Receiver are in poor connections status. Dark: The Transmitter and Receiver are not connected. 9 Data Signal Indicator Lamp Illuminate: The HDMI signal with HDCP. Flashing: The HDMI signal without HDCP. Dark: No HDMI signal. 1 8 9 2 3 4 5 6 7 1 Power LED: System power indicator. 2 DC 24V: Connect 24V/1A adaptor to AC wall outlet for power supply. 7/11 3 HDBaseT In: Standard HD BaseT signal input port. Connect HDBaseT Transmitter with a UTP cable following the standard of direct interconnection method. 4 HDMI Out: HDMI output port. This slot is where you connect the HDTV or monitor with HDMI cable. 5 IR In: Channel 1 IR Receiver. Connect with Wideband IR Rx 6 IR Out: Channel 2 IR Transmitter. Connect with Wideband IR Tx. 7 RS-232: Phoenix jack provides serial port control signal between transmitter and receiver. 8 Connection Signal Indicator Lamp Illuminate: The Transmitter and Receiver are in good connections status. Flashing: The Transmitter and Receiver are in poor connections status. Dark: The Transmitter and Receiver are not connected. 9 Data Signal Indicator Lamp Illuminate: The HDMI signal with HDCP. Flashing: The HDMI signal without HDCP. Dark: No HDMI signal. 8/11 Description 1 POC (Power Over Cable) Application Example Description 2 Bidirectional Infrared control Application Example 9/11 Description 3 Bidirectional RS-232 control Application Example 10/11 11/11