SmartWatch T50S User Guide

1. Initial Setup and App Connection

Connecting to the GloryFit App

To fully utilize your smartwatch, it must be connected to the 'GloryFit' application. Follow these steps:

1. Ensure your phone's Bluetooth function is enabled.
2. Open your phone's app store (Google Play or App Store).
3. Search for the 'GloryFit' APP and download it.
4. Open the GloryFit APP. Tap 'Please connect device' and then 'Select device'.
5. Find 'T50S' in the list and bind it to your phone.

Enabling Call and Media Functions

To use the answer/call function and play media sound through the watch, perform the following steps:

1. After selecting 'T50S' to connect in the APP, a pairing request will appear on your mobile phone system.
2. Turn on the call Bluetooth switch on the watch (this is used when the watch cannot make calls and play media sound directly).
3. In your phone's Bluetooth settings, select pairing for 'T50S(ID-9324)'.
4. Once connected, you can use the watch to answer/make calls and play media anytime.

If you do not need the call function, you can turn it off to conserve battery life.

Important Notes for Connection

• For Android users: Ensure the GloryFit APP has necessary permissions and runs in the background for optimal experience. Some Android versions may require manual background process management.
• For iPhone users (iOS 13 and below): After connecting via the APP, you must also connect to 'T50S' a second time within your phone's Bluetooth settings to enable call and media functions.

2. Appearance and Charging

Appearance Description

• Short watchband
• Side button (startup & shutdown, return)
• Green light sensor
• Full-screen touch area
• Thimble
• Long watchband
• Charging contacts

Schematic Diagram of Charging

The watch uses a magnetic charging cable with a USB port. Align the magnetic end with the charging contacts on the back of the watch.

Charging Instructions

• Use the product-specific magnetic charging cable. Align it with the charging contacts on the watch's back.
• Do not use power adapters exceeding 5V voltage or 1A output current, as this may cause charging failure or damage.
• When the watch is out of power, activate it by charging. The screen will light up after approximately 5 minutes of charging.

3. Watch Functions

Main Interface

Displays current time, date, and steps. Press and hold the main interface to switch between different watch faces. Tap to confirm your selection.

Call Function

Tap the call switch to enable/disable. Connect to 'T50S-xxxx' via phone's Bluetooth settings to play mobile music or make/receive calls.

Steps

Displays current steps, distance, and calories. View detailed data records in the GloryFit APP.

Exercise

Access multiple sport modes by tapping the icon. Select a sport, tap to start, and slide right to pause or stop.

Sleep Tracking

Records and displays your sleep duration from the previous night, including deep and light sleep times. More detailed data is available in the GloryFit APP.

Weather

Shows local weather conditions. Requires connection to the GloryFit APP, phone GPS enabled, and APP granted positioning permission.

Message Notifications

Receive alerts for incoming calls, SMS, QQ, WeChat, and other notifications. Set notification preferences in the GloryFit APP. Stores up to 8 message records. Requires continuous phone connection and granted permissions.

Music Control

Control your mobile phone's music player (play/pause, previous/next song) after connecting to the GloryFit APP. The phone's music player must be open and active.

Stopwatch

Tap the icon to start timing. Tap again to pause or reset. Slide right to exit.

Heart Rate Monitoring

Slide to this page for automatic real-time dynamic heart rate measurement.

Blood Oxygen Monitoring

Slide to this page for automatic blood oxygen measurement. The watch will vibrate to indicate the result.

Search Function

Tap this icon to make your phone beep, helping you locate it. Requires the phone to be connected to the watch APP. No alert sounds if the phone is in silent mode.

Settings

Access settings by tapping the icon. Options include brightness adjustment, factory data reset, turning off the watch, and viewing watch information.

4. Precautions and Troubleshooting

Precautions

• Do not charge the watch if it has water stains.
• This product is an electronic monitoring device, not for medical use. Measurement data is for reference only.
• Avoid wearing the watch during hot water baths or prolonged swimming.
• Always use the matching charging cable provided with the product.

Frequently Asked Questions (FAQ)

Issue: Watch cannot be searched in the APP or time synchronization fails.

1. A. Ensure your phone's Bluetooth and GPS positioning are enabled before first use.
2. B. Grant positioning permission to the GloryFit APP via phone settings (Settings > Applications).
3. C. If the watch is already paired via phone's direct Bluetooth connection, cancel the pairing first, then search and connect within the APP.
4. D. If the watch has been idle, Bluetooth may enter a dormant state. Turn off Bluetooth on both the watch and phone, wait about 1 minute, then re-enable and try searching in the APP again.
5. E. The watch must be connected to the GloryFit APP for functions like steps, sleep, and time to work correctly.

Issue: No alert function on the watch.

1. For first-time use:
2. Android users: Follow APP prompts or enable information reminders in the APP and grant notification permissions.
3. Apple users: After connecting via the APP, accept the pairing request. Enable desired application reminders within the APP. Ensure 'Notification Center' is enabled for the specific app in Phone Settings > Notifications.

Issue: Reminder switch is on, but no reminder appears, or reminders are sporadic.

If message notifications and app permissions are correctly set, Bluetooth is active, and the APP/watch remain connected, sporadic reminders might indicate system-level issues with the alert function. Re-check the message push settings.

Issue: Android phone Bluetooth disconnects frequently or loses message alerts after a period.

Android systems may periodically close background applications to optimize performance. If the GloryFit APP is not set to run in the background, it can be closed by the system, causing Bluetooth disconnections. Consult your phone's specific settings for managing background app activity (e.g., 'Application Launch Management' or 'Power Consumption Ranking').

5. Activation and Warranty

Enjoy 24 months of support for damaged, defective, upgraded, or missing items, with no need to return the original product. Please activate your product via email within 15 days of purchase.

Activation Email: amazon.seller9966@gmail.com

6. FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Warning for Portable Device: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.