Instruction Manual for Zintronic models including: Adding Camera To The Network Using Mobile Phone, Camera To The Network Using Mobile Phone, Network Using Mobile Phone, Using Mobile Phone, Mobile Phone, Phone
CamHi cameras
Adding camera to the network using mobile phone This manual refers to Zintronic `A' & `P' series. Table of contents: Section I - Camera proper connection and configuration via mobile phone Connecting camera to the power supply.................................................................................. Connecting via WiFi hotspot to the camera network........................................................................ Section II - Adding camera to the CamHiPro application after connecting with WiFi hotspot............... Adding camera to the CamHiPro application....................................................................................... Adding camera to the WiFi home network using CamHiPro application ............................................. I. Camera proper connection and configuration via mobile phone Connecting camera to the power supply Connect camera using cable power supply 12V from the box, as shown on the picture below . 1 Connecting via WiFi hotspot to the camera network: A and P camera series are generating their own WiFi network, to add camera we have to go to mobile phone Settings and then check available WiFi networks Choose camera network IPCAM-xxxxxx-xxxxx (where x digits and letters are assign to camera UID) Connect with camera WiFi hotspot according to the example as shown on pictures below Choose camera WiFi network Fill in the password (01234567) After connecting choose "Connect anyway?" as "Connect" When we do this properly we will see an information ,,Connected without internet" . 2 . 3 II. Adding camera to the CamHiPro application after connecting with WiFi hotspot · Adding camera to the CamHiPro application · Turn on the CamHiPro application · We click ,,+" button in the top right corner or "Click Add device" in the middle of the screen (when we have not added any other camera yet) . 4 We choose an option ,,IP Camera" In the next step application will automatically forward us to adding camera to the network, when it will be detected It will be shown like on pictures below . 5 Choose an option ,,Yes, I want to add this device" It will show UID number of the camera, login and password as default: admin, admin (we don't change anything) In the next step click ,,Add to" . 6 After adding camera configure the WiFi network Look for the name of our WiFi local network on the list and select proper one Then fill in the password to our WiFi local network In the next step accept by clicking ,,Configure wireless and add" Give a name to our camera or we choose one of shown suggestions, then click "Confirm" Camera will connect to our WiFi local network and it will stop emulating its own WiFi hotspot . 7 . 8 . 9 After that the CamHiPro application will force password change when we will click on the screen Click ,,OK" The old password is admin . 10 Create your own new password (it has to contain at least 8 characters: at least 1 uppercase letter, lowercase letter and a digit!!!) Repeat the new password Then click ,,Apply". After that our camera will be online when we come back to the main menu and view from the camera will be available after clicking on the screen Configuration completed! . 11Microsoft Word dla Microsoft 365