KLIM V8 Laptop Cooler User Manual
Introduction
Thank you for acquiring the KLIM V8 laptop cooler. This product is designed to help maintain your laptop at an optimal temperature. For assistance or feedback, contact KLIM Technologies specialists at support@klimtechnologies.com, who reply within 24 hours.
Product Specifications
- Dimensions: 393 x 269 x 29 mm
- Weight: 910 g
- Fan dimensions (1): 70 x 70 x 15 mm
- Fan dimensions (2): 80 x 80 x 10 mm
- Maximum fan speed: 2200 ± 10% RPM (level 6)
- Default fan speed: 1700 ± 10% RPM (level 3)
- Minimum fan speed: 1450 ± 10% RPM (level 1)
- Number of fans: 8
- Airflow: 81.3-106.8 CFM
- Fan noise: 19.5-24.3 dB
- Current: 0.85A-1.4A ± 10%
- Voltage: 5 V
- Power connection: USB cable
- Compatibility: 10 to 17 inch laptops
Installation and Use
Follow these steps for installation and operation:
Setting Inclination
Set your preferred inclination by inserting the bracket into the slots. Ensure both sides are at the same level.
[Illustration: Diagram shows inserting adjustable brackets into slots to set cooler inclination, ensuring both sides are level.]
Connecting the Cooler
Place the laptop on the cooling pad. Connect the USB cable from the cooling pad to the laptop. If needed, lift the frontal tabs to keep the laptop securely in place.
[Illustration: Diagram illustrates placing a laptop on the cooler, connecting the USB cable, and using front tabs to secure the laptop.]
Controls
The KLIM V8 features several controls:
- On/Off Button: Press this button to turn the laptop cooler on or off.
- Fan Speed Control: Use the '+' and '-' buttons to adjust the fan speed. The default speed is level 3.
- RGB Lights Control: Press the RGB button to cycle through different lighting effects on the sides of the cooler. Press and hold the RGB button for 3 seconds to turn off the side lights. Note: The lights on the fans themselves remain on while the device is running.
[Illustration: Diagram labels the On/Off button, '+' and '-' buttons for fan speed, and the RGB button for light control.]