X6 Bone Conduction Bluetooth Headphones

Introduction

This document provides instructions for the X6 Bone Conduction Bluetooth Headphones.

Wearing

Spread the headphones apart with both hands and wear them to the appropriate position. The sound-producing parts of the headphones should be in front of both ears without the need to insert them into the ear canal.

Diagram showing how to wear the headphones correctly.

Basic Operations

Power on/off

Press and hold the power button for 3 seconds. When the indicator light flashes red and blue alternately, the headset has been turned on. When the red light turns on and off, the headphones have been turned off.

Pairing Method

1. Keep the headphones within a 1-meter range for the initial pairing.
2. When the red and blue lights flash alternately, it indicates that the headphones have entered automatic Bluetooth pairing mode.
3. Open your smart device and locate "X6" in the Bluetooth list.
4. Click to connect. The blue light will flash slowly upon successful connection.

Button Functions

Bluetooth Mode

• Power on/off: Press and hold on power button for 3s
• Pause / Play: Single click on power button
• Volume up/down: Single click on + or button
• Next track: Double click on + button
• Previous track: Double click on button
• Answer call: Single click on power button when incoming call
• Reject call: Press and hold on power button for 2s when incoming call
• Hang up: Single click on power button during a call
• Voice assistant: Press and hold on the + button for 2s
• Game mode (Low latency): Press and hold on the button for 2s
• Reset: Press + button 4 times

MP3 Mode

• Switch MP3 Mode: Double click on power button (Power on status)
• Pause/play: Single click on power button
• Volume up/down: Single click on + or button
• Next track: Double click on + button
• Previous track: Double click on button

Switching between Bluetooth and MP3 mode

The headset is in Bluetooth mode by default. Press the power button twice consecutively to switch to MP3 mode. The same operation applies to switch back to Bluetooth mode.

Charging the headphones

The headphone's battery capacity will be displayed on the phone. The headphones will prompt "Low power" when the battery is running low.

Specifications

Wireless Performance

The headphones offer a stable wireless connection up to 10 meters (33 feet).

Storage & Maintenance

1. Store the headphones in a cool and dry place; the working temperature is 0-45°C.
2. Do not put the headphones in a higher or lower temperature environment.
3. Please charge it before using after a long time storage.
4. Do not charge the headphones in a moist environment.
5. Do not use the headphones during charging.
6. Headphones are water-resistant but do not use under water for more than half an hour.

Manufacturer Information

Manufacturer: Shenzhen Sounder Digital Technology Co., Ltd

E-mail: support@moonpanda-tech.com

Address: Room 2108, Building 4, Phase II, Tianan Yungu Industrial Park, Bantian Street, Longgang District, Shenzhen, China, 518000

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must withstand any interference received, including interference that may cause undesired operation.

FC CE ROHS

Made in China