Owner's Manual for SHARP models including: SMC1464KSC, SMC1664KSC, SMC2264KSC, SMC1585KS, SKM Series Built In Trim Kits, SKM Series, Built In Trim Kits, Trim Kits, Kits
16 мая 2025 г. — Prepare the cabinet or wallopening to provide access to a separate 3-pronged, 120V AC outlet of 15 amps or greater. Not all microwave ovens canbe built-in.
File Info : application/pdf, 2 Pages, 6.09MB
DocumentDocumentBuilt-In Trim Kits Can Be Used for Both Standard or Flush Mount Installation Designed for Sharp® Countertop and Convection Microwave Ovens Compatible with Sharp® Countertop Microwave Oven Sizes 1.4 cu. ft to 2.2 cu. ft. Stylish Design and a Stainless Steel Finish Creates a Seamless, Built-in Appearance Includes Finish Trim, and Easy-to-Follow Instructions SMC1585BS Convection Microwave Oven with the RK-94S30 Trim Kit SMC1585KS Convection Microwave Oven with the RK94S30F Trim Kit When building-in a Sharp® Countertop Microwave Ove n, be sure to use the proper Sharp built-in kit. All Sharp kits provide ductwork to assure proper air circulation around the product. Never enclose a microwave oven so tightly that air cannot circulate around it. It will not function properly in a tight enclosure. Prepare the cabinet or wallopening to provide access to a separate 3-pronged, 120V AC outlet of 15 amps or greater. Not all microwave ovens can be built-in. Check the nameplate located on the inside of the microwave oven for the correct built-in kit. Always refer to the installation guide for recommendations. MODEL SKM146424LS UPC 610655535507 SKM166430LS 610655583690 SKM226430LS 610655604005 RK94S27F 074000621084 RK94S30F 074000621091 Product specifications and design are subject to change without notice. DESIGNED FOR SMC1464KSC SMC1664KSC SMC2264KSC SMC1585KS SMC1585KS WIDTH 24 in 30 in 30 in 30 in 30 in SKM146424LS SKM166430LS SKM226430LS Built-In Trim Kits MODEL SKM146424LS SKM166430LS SKM226430LS RK94S27F RK94S30F MODEL SKM146424LS SKM166430LS SKM226430LS RK94S27F RK94S30F FRAME DIMENSIONS A (HEIGHT) 15-7/8" 16-7/8" B (WIDTH) 23-7/8" 29-7/8" 17-7/8" 20" 20" 29-7/8" 26-7/8" 29-7/8" FRAME DIMENSIONS A (HEIGHT) 15-7/8" 16-7/8" 17-7/8" 20" 20" B (WIDTH) 23-7/8" 29-7/8" 29-7/8" 26-7/8" 29-7/8" C (HEIGHT) 15-3/8" 16-3/8" 17-3/8" 18-1/2" 18-1/2" STANDARD CUTOUT DIMENSIONS D (WIDTH) 22-33/64" - 22-3/4" 28-1/2" - 28-47/64" 28-1/2" - 28-47/64" 25 - 1/4" 25 - 1/4" E (MIN. DEPTH) 18" 21" 22-3/8" 20-1/8" 20-1/8" C (HEIGHT) 16" 17" 18" 22-7/16" 22-7/16" FLUSH CUTOUT DIMENSIONS D (WIDTH) 24" 30" 30" 27-1/8" 30-1/8" E (MIN. DEPTH) 18" 21" 22-3/8" 20-1/8" 20-1/8" SIMPLY BETTER LIVIN G © 2025 Sharp Electronics of Canada Ltd. All rights reserved. Sharp, Carousel and all related trademarks are trademarks or registered trademarks of Sharp Corporation and/or its affiliated companies. All other tar demarks are property of their prospective owners. Product specifications and design are subject to change without notice. At Sharp Electronics of Canada, we are committed to Simply Better Living. Our innovative home appliance products are SIMPLE to use, BETTER than the competition, and encourage a HEALTHY LIFESTYLE. SHARP ELECTRONICS OF CANADA LTD. 5995 Avebury Road, Suite 900, Mississauga, ON L5R 3P9 Tel: 905-568-7140 | sharp.ca May 2025