User Manual for NEEWER models including: BH-30S, BH-30S RGB Light Wand, BH-30S, RGB Light Wand, Light Wand, Wand
neewer-support-center
About this product Thanks for purchasing the NEEWER BH-30S RGB Light Wand. The BH-30S is a handheld RGB light wand used for photography lighting. With built-in rechargeable batteries and an upgraded charging circuit, the light boasts an extended operating time of up to 150 minutes. Easily switch between the CCT mode, HSI mode and Scene mode to provide vibrant colored lights to achieve your desired lighting effects for photography and videography, both indoors and out. EN Package Contents BH-30S RGB Light Wand ×1 USB Charging Cable ×1 Handle ×1 NEEWER Carrying Bag ×1 01 Product Illustration Illuminated LOGO EN Power Button (long press) Press on the adjustment dial: HSI mode Press left: Brightness mode Press down: Scene mode Handle Locking Knob NEEWER Display Infinity/2.4G Mode Touchpad Lock button (short press) Press right dial: Color Temperature Rotate the dial: changes item values Navigate through items (short press) RGB Color Mixer Angle Adjustment Knob Integrated Handle Stand Securing Knob USB Charging Port 1/4" Screw Hole Long press the " " button for 5 seconds to reset the Infinity connection. 02 How to Assemble Installing the handle Insert the 1/4" screw and the four safety tabs into matching entry points at the bottom of the light wand, then tighten the Handle Locking Knob to secure. EN Mounting the light on a stand Adjusting the light angle Insert the top screw of a light stand into the bottom screw hole of the support bracket, then rotate the knob to secure. The light stand mentioned above isn't included and is available for separate purchase. Set the light wand to the required, and tighten the Angle Adjustment Knob (0°-180° tilt range). How to Use Charging the light Connect the light to a power source using the USB charging cable and a 5V/2A power adapter. During the charging process, the bars battery icon " " will pulse. After reaching a full charge, the icon " " remains constantly on displaying full bars. * The USB connector of the charging cable can be inserted into a power adapter, power bank, or computer for battery charging. 03 How to Use EN 04 Turning the light on/off Long press the " " Power Button until the display lights up and the light wand turns on. Adjusting brightness level In any mode, simply press on the left dial "INT" until the display shows the " " symbol flashing, then rotate the dial to adjust the brightness level. Changing color temperature Press right dial "CCT" to change to color temperature screen. Short press the center dial " " until the symbol "00K" is flashing on the display. Rotate the dial to change color temperature values. Red and green compensation value adjustment Press right dial "CCT" to change into color temperature screen. Short press the center dial " " until the symbol "GM" is flashing on the display. Rotate the dial to set red/green color compensation value. How to Use Adjusting saturation Press upper dial "HSI" to enter HSI mode. Next, short press the center dial " " until the S number flashes on the display, then rotate the dial to set saturation value. EN Adjusting hue (via HSI mode) Press upper dial "HSI" to enter HSI mode. Next, short press center dial " " until the H number is flashing on the display, then rotate the dial to set hue value. Adjusting hue (via RGB Color Mixer) In any mode, short press the " " button until the " " icon disappears on the display. Then move the RGB Color Mixer with your finger to adjust hue. Short press the " " button again until the diaply shows the " " symbol. This indicates that the RGB Color Mixer is now locked. Setting special scenes Press lower dial "SCENE" to activate the light's SCENE mode. Short press center dial " " until light scene flashes on the display. Rotate the dial to switch between different scenes. 05 How to Use Scene modes Lightning Paparazzi Defective bulb Explosion Welding CCT Flash Hue flash EN CCT Pulse HUE Pulse Cop car Candlelight HUE loop CCT loop INT loop TV screen Fireworks Party Music Infinity To enter into Infinity mode, please long press the " " button until the " " symbol flashes on the display. To control the light wand with your phone, you will need to download and install the "NEEWER" App to connect with the light wand. For detailed instructions, please scan the QR code on the App leaflet. Please reset Infinity by pressing and holding center dial " " for 5 seconds. 2.4G mode Long press " " button until the display shows the symbol "CH" to indicate that the light is in 2.4G mode. Short press " " button to switch to channel setting, then rotate the dial to choose a channel. 06 How to Use In 2.4G mode, you can set multiple LED lights on the same channel (such as CH8). When you change light settings on one of the lights, all other lights set on the same channel will adjust to the same settings. Notes 1. Please avoid dropping the light or subjecting it to a strong impact. 2. When the light wand is on, please do not stare at the LED beads to avoid the risk of visual impairment. EN 3. Please keep the light away from inflammable and volatile substances. 4. Please do not use the light in the rain or a humid environment. 5. If left unused for a long period of time, please charge the light wand every three months. 6. If you use the light when it's being charged by an AC adapter of less than 5V/2A, the light may go due to receiving insufficient power. Specifications Model Number of LEDs Rated Power Color Rendering Index TLCI Maximum Illuminance Color Temperature Range Brightness Range Hue Available Scenes Built-in Battery Charging Input Charging Port BH-30S 80 LEDs (warm white)+80 LEDs (cold white) +84 LEDs (RGB) 15W 97 97 6300K@0.5M(1800LX) 2500K~10000K 0%-100% (in 1% increments) 0~360° 18 7.7V/4150mAh/32Wh DC 5V/2A, 9V/2A Type-C 07Adobe Illustrator 24.0 (Windows) 3-Heights™ PDF Optimization API 6.9.0.3 (http://www -tools.com)