Instruction Manual for Lowes models including: 6BC, 230717, 71132072 Drawer Dresser, Drawer Dresser, Dresser

最终CAB-6BC-收纳柜-说明书-230717(1)

[PDF] Drawer Dresser

As shown in the figure, place the bottom plate (F) of the drawer into the expansion drawer (E) and install the drawer handle (3) with bolts (9) * 2. Install six ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 7 Pages, 4.30MB

Document Document

Drawer Dresser
Instruction Manual

1 Component List

A X1

B X1

C X1

D X2

Side Frame
E X6

Middle Frame
F X6

Side Frame
G X2

Cross Tube
H X1

Drawer

Base Board for Drawer

Reinforcement Bar

2 Supplied Parts and Hardware

1 X12

2 X6

3 X6

Top Board
4 X4

Bolts
M6×25mm
5 X1

Bolts
M5×10mm
6 X2

Drawer Handle
7 X2

Adjusting Foot
M6×14mm
8 X1

Wrench
M4
9 X12

Expansion Tube

Bolts
M4×60mm

Wrench
M4

Bolts
M4×12mm

E F
Step 1

H A
B G C
D D

A
5 11

B
1 1

C
1 1

forward

As shown in the figure, use bolts (1) * 6 and a wrench (5) to secure the side frame and intermediate frame (A&B&C) to the back of the top plate (H).

NOTE:

1Place a blanket under the top plate to avoid scratches or damage. 2The side frame (A&B&C) faces in the same direction, with the

holes facing forward.

Step 2

1 1

1

1

D

D

1

1

H
As shown in the figure, install the Cross tube (D) * 2 onto the frame (A&B&C) using bolts (1) * 6 and a wrench (5).
Step 3

2

2

G

2

G

2 2 2
As shown in the figure, use bolts (2) * 6 and wrenches (5) to secure the reinforcement bars(G) * 2 to the frame (A&B&C).

Step 4

4

4

4 4

Install the adjustment feet (4) * 4 onto the side frame (A&C) as shown in the figure.
Step 5

As shown in the picture, flip the cabinet over with the back facing back.

Step 6

E E

8

x6

F

(9)x12

E

(3)x6

As shown in the figure, place the bottom plate (F) of the drawer into the expansion drawer (E) and install the drawer handle (3) with bolts (9) * 2. Install six drawers in the same way.

Step 7

6 7
7

As shown in the figure, place the installed drawers (E) * 6 into the frame in sequence. If you need to fix the drawer trimmer to the wall, use an electric drill to drill holes on the wall, then insert an expansion tube (6) * 2, and secure the drawer trimmer with bolts (7) * 2.