Siemens SIRIUS 3SE63 RFID Safety Switch
Original Operating Instructions
Product Overview
The Siemens SIRIUS 3SE63 RFID safety switch is designed for position monitoring of moving protective devices in safety circuits. It ensures the safe operation of machinery by detecting the position of guards and interlocks.
Technical Specifications
| Parameter | Value |
|---|---|
| Current (le) | 0.6 A |
| Voltage (Ue) | 24 V DC -15% / +10% (PELV) |
| Impulse Withstand Voltage (Uimp) | 800 V |
| Protection Class (PL) | e |
| Safety Integrity Level (SIL) | 3 |
| Switching Frequency (X1/X2) | 24 V DC -15% / +10% |
| Switching Time | ≤ 0.5 ms |
| Output Current (OSSD1/OSSD2) | 24 V DC / 0.25 A |
| Minimum Distance (x) | 2 mm |
Product Variants
- 3SE6315-0BB01
- 3SE6310-0BC01
- 3SE6315-1BB01
- 3SE6310-1BC01
- 3SE6315-0BB02
- 3SE6315-1BB02
- 3SE6315-0BB03
- 3SE6315-1BB03
Safety Information
DANGER: Hazardous voltage. Will cause death or serious injury. Turn off and lock out all power supplying this device before working on this device. Installation and maintenance work on this device may only be carried out by an authorized electrician.
The device is designed for safety applications and must be installed and operated in accordance with relevant safety standards and regulations, including ISO 13849-1 and IEC 61508.
Installation and Operation
The safety switch RFID is used for position monitoring of moving protective devices in safety circuits. The device must be installed such that the protective device can only be opened when the safety switch is in the correct position. Ensure a minimum distance of 10 mm between the actuator and the switch for reliable operation.
Diagrammatic Representation of Installation and Operation:
The document includes detailed diagrams illustrating the mounting, wiring, and operational states of the safety switch. These diagrams show the physical dimensions, connection terminals (OSSD1, OSSD2, X1, X2, AUX OUT, 24V DC, GND), and the relationship between the switch and actuator for safe and unsafe states.
Operational States:
- OK State: Indicated by a green light and the output signals OSSD1 and OSSD2 being active (24 V DC). This occurs when the protective device is closed and correctly aligned with the switch.
- Not OK State: Indicated by a red light or no light, and the output signals OSSD1 and OSSD2 being inactive. This occurs when the protective device is open or misaligned.
Specific operational sequences are shown with numbered steps and visual cues, demonstrating the correct alignment and activation of the safety switch.
Compliance and Declarations
The product complies with EU directives and standards, including the Machinery Directive (2006/42/EC), RED Directive (2014/53/EU), and RoHS Directive (2011/65/EU). It also complies with relevant harmonized standards such as EN ISO 13849-1, EN 60947-5-3, and EN ISO 14119.
The device also complies with FCC Rules Part 15 and ISED Canada's licence-exempt RSS standards. Operation is subject to the conditions that the device does not cause harmful interference and accepts any interference received.
EU Declaration of Conformity: Confirms compliance with EU directives and standards, with Siemens AG, SI EP, DE-92220 Amberg listed as the manufacturer.
UK Declaration of Conformity: Confirms compliance with UK statutory requirements, including the Supply of Machinery (Safety) Regulations 2008, Radio Equipment Regulations 2017, and RoHS Regulations 2012.
Contact Information
For technical assistance, contact Siemens AG:
Siemens AG, Technical Assistance
Breslauer Str. 5
D-90766 Fürth
Telephone: +49 (911) 895-5900
Fax: +49 (911) 895-5907
E-mail: technical-assistance@siemens.com
Internet: www.siemens.com/sirius/technical-assistance
Further information and support can be found at: http://support.industry.siemens.com
