SIGURO LED Mirror

Introduction

Thank you for purchasing a SIGURO appliance. We are pleased to introduce this product and its functions.

SIGURO partners with suppliers who meet strict criteria for employee interests, abuse prevention, and fair working conditions.

For maintenance or repair requiring internal access, contact authorized service at siguro@alza.cz or the seller's info line.

Product Overview

The SIGURO LED Mirror is designed for personal use, offering adjustable lighting and magnification.

Key Components:

• Mirror Area: Features a primary reflective surface and a 10x magnification area on the opposite side.
• LED Lighting Ring: Provides adjustable illumination around the mirror.
• Micro USB Charging Connector: Located on the back for charging the internal battery.
• Switch: Controls the LED lighting (on/off, color temperature, brightness).

The package includes the mirror and a Micro USB power cable.

Specifications:

Safety Information

Please read this manual carefully before use and keep it for future reference.

• The mirror can be used by children and persons with reduced physical/mental abilities or lack of experience, provided they are supervised and understand potential dangers.
• Children must not play with the device.
• Keep packaging out of reach of children (risk of suffocation).
• Check for visible damage before use. If in doubt, do not use and contact your vendor or service center.
• Do not disassemble the mirror.
• Protect from pointed or sharp objects.
• Do not use if dropped or damaged.
• Use indoors only, in dry conditions. Handle with dry hands.
• Position to prevent falling into water or on the ground. Do not use in the bath or shower.
• If the power cord or any part malfunctions or is damaged, repair must be performed by a qualified electrician. Improper repairs can cause injury.
• Intended for personal home use only, not for commercial use.
• Do not place where it could reflect the sun's rays.

Usage

Charging

• The mirror has a rechargeable battery charged via the included Micro USB cable.
• Connect the USB cable to the mirror's Micro USB connector.
• A charging indicator light will illuminate during charging and turn blue when fully charged.
• Fully charge the mirror before its first use.

Operation

• Press the switch on the mirror surface to turn on the LED lights.
• Press the switch repeatedly to cycle through light color temperatures: warm, cool, and daylight simulation. The light turns off after cycling through all modes (fourth press).
• Press and hold the switch after turning on the light to dim the intensity. The set intensity will be maintained when you release your finger.

Cleaning and Maintenance

• Always ensure the mirror is switched off before cleaning or storing.
• Do not use aggressive cleaning agents or materials that could scratch the mirror's surface.
• Store the mirror in a dry, cool place, away from direct sunlight.

Compliance Information

The WEEE symbol [crossed-out wheeled bin] indicates that this product should not be treated as household waste. Proper disposal helps protect the environment. For recycling information, contact your local authority, waste disposal service, or the shop where purchased.

This product meets relevant EU regulations. The EU declaration of conformity is available at www.alzashop.com/doc.

This product sold in the European Union complies with Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).