Instructions for Schneider Electric models including: HMIG5U, HMIG5U2, HMIG5U21, HMIG5U22, HMIG3U, HMIG3UFC, HMIG2U, HMIG2U Harmony GTU Box Module, HMIG2U, Harmony GTU Box Module, GTU Box Module, Box Module
File Info : application/pdf, 3 Pages, 458.10KB
DocumentDocumentENVEOLI1403023_V2 - End of Life Instructions - Harmony GTU Box Module Product End of Life Instructions Harmony GTU Box Module Harmony GTU ENVEOLI1403023_V2 2024/2/1 ENVEOLI1403023_V2 - End of Life Instructions - Harmony GTU Box Module Potential disassembly risks The Circularity profile provides information about preparation for re-use and treatment. It identifies the relevant EEE components and materials as well as their location. Safety instructions for product dismantling and depollution are provided into the User manual or maintenance guide. End of Life Instructions 1 Recommendation Potential hazards To be depolluted Other Number on drawing 1 2 Component / Material Batteries Electronic Board (Communication) > 10cm² Weight (in g) 2.5 278.2 639.3 2 Comment PCBA ENVEOLI1403023_V2 2024/2/1 ENVEOLI1403023_V2 - End of Life Instructions - Harmony GTU Box Module Product description Manufacturer identification Brand name Product function Product reference Additional similar product references Total representative product mass Schneider Electric Industries SAS Schneider Electric High connectivity with a wide range of industrial controllers HMIG5U HMIG5U2 HMIG5U21 HMIG5U22 HMIG3U HMIG3UFC HMIG2U 920 g Representative product dimensions 131mm x 188mm x 35mm Accessories Date of information release No 2024/2/1 Additional information Legal information Recyclability potential This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed according to the legislation of the country. This document is intended for use by end of life recyclers or treatment facilities. It provides the basic information to assure an appropriate end of life treatment for the components and materials of the product. 57% Recyclability rate has been calculated based on REEECY'LAB tool developed by Ecosystem, for components/materials not covered by the tool, data from the "ECO' DEEE recyclability and recoverability calculation method" was taken. If no data was found a conservative assumption was used (0% recyclability). Schneider Electric Industries SAS Country Customer Care Center http://www.se.com/contact 35, rue Joseph Monier CS 30323 F- 92500 Rueil Malmaison Cedex RCS Nanterre 954 503 439 Capital social 928 298 512 www.se.com ENVEOLI1403023_V2 Published by Schneider Electric © 2023 - Schneider Electric All rights reserved ENVEOLI1403023_V2 2024/2/1 2024/2/1