hipeq.com/product-registration
Owner's Manual for ROPEFLEX models including: RX1500 Dragon Upright Rope Trainer, RX1500, Dragon Upright Rope Trainer, Upright Rope Trainer, Rope Trainer, Trainer
Ropeflex RX1500 | Dragon Upright Rope Trainer – 360 Fitness Superstore
Ropeflex RX1500 Dragon Multifunction Rope Trainer - Free Shipping — Select Fitness USA
Ropeflex RX1500 Dragon Multifunction Rope Trainer - Free Shipping — Select Fitness
File Info : application/pdf, 10 Pages, 451.70KB
DocumentDocumentPLEASE REGISTER YOUR NEW PRODUCT To register your product online please go to: www.hipeq.com/product-registration Product serial number is located on equipment or is shown in the box below SERIAL NUMBER If serial number is not sown please check equipment DRAGON RX1500 Assembly Instructions & Manual DOC: 32-1029 Configuration subject to change RX1500 ASSEMBLY INSTRUCTIONS & MANUAL WARNING DECAL PLACEMENT The decals shown here have been placed on the equipment in indicated locations. If any of the decals are missing or illegible, call us tollfree at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals in the locations shown. 32-1029-M-REV.B 1 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL IMPORTANT PRECAUTIONS 32-1029-M-REV.B WARNING: To reduce the risk of serious injury, read the following important precautions before using this equipment. 1. Read all instructions in this manual and 6. Make sure the adjustment knobs are fully assemble as described before using this engaged / disengaged before using the equipment. equipment. 2. It is the responsibility of the owner to ensure 7. Always wear athletic shoes for foot that all users of this equipment are adequately informed of all precautions. protection while exercising. 8. This equipment is designed to support a 3. Use this equipment only on a level surface. Cover the floor beneath to protect the surface. maximum user weight of 300 pounds. 9. Pull on one the rope only and never grab a rope in a way that prevents the drum from 4. Keep children under 12 and pets away from the equipment at all times. rotating. Never attempt to hang on the rope or frame. Pull rope with hands only. 5. Make sure all parts are properly tightened 10. If you feel pain or dizziness at any time each time you use this machine. Replace while exercising, stop immediately and any worn parts immediately. begin cooling down. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. HiPEQ assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 2 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL 32-1029-M-REV.B Box Contents / Parts List DRAGON TOP ASSEMBLY ITEM 1 2 3 4 5 6 7 8 9 10 11 QUANTITY 1 OR 2 1 1 2 UP TO 12 UP TO 12 4 2 2 2 4 DESCRIPTION RX505 (HYDRA) Drum with Rope RX1500 (DRAGON) Base RX1500 (DRAGON) Main Mast Mast cover plates Button Head Screw 5/16" x 1" Washer 5/16" Washer ½" Screw ½-13" x 5-1/2" Lock-nut ½-13" Base support tubes 3/8" Mast cover plate screws Qty. UP TO 12 HEX Head Screw 5/16" x 1" Qty.10 Washer 5/16" Qty.2 Screw ½-13" x 5.5" Qty.4 Washer 1/2" Qty.2 Lock-nut ½-13" 3 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL Tools Required for Assembly ¼" Hex Key 32-1029-M-REV.B 3/4 Hex Open Wrench 4 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL 32-1029-M-REV.B Product Assembly STEP 1 1-1 Assemble the unit as shown below and tighten all fasterns. Note: Do not attempt assembly alone. Two person installation required. Mast Plates Hardware (3/8 or 5/16 screws) Qty.4 Drums may arrive unassembled. Thread rope through pins as shown and attach cover plate with handle using included hardware. Hardware (1/2" washers, bolts & lock-nut) Qty.4, 2 & 2 5 Hardware (5/16" washer & screw) Qty.4 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL 32-1029-M-REV.B Product Assembly - continued Stiffening mast plates installation 1-2 Before putting ROPE DRUMS remove the clips. Install clips once the drums are securely positioned on the mast(s) and use threaded clips as show. Once stiffening mast plates are secure, cover tube ends with plastic covers. OPTION A 4X 5/16-18 THREAD SNAP-IN NUT PLASTIC TUBE COVER OPTION B 4X 3/8-16 THREAD CLIP-ON BARREL NUT 6 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL 32-1029-M-REV.B Equipment Maintenance WARNING: Routine inspection and maintenance is of critical importance to ensure maximum safety and performance. We use the highest quality materials available, but wear is inevitable. Be advised that dangerous conditions can arise even during a warranty period. A warranty does not negate the owner's responsibility to thoroughly, carefully and daily inspect the machine. Consult your physician before starting your exercise program. For your own safety, do not begin any exercise program without proper instruction. 1. Check Rope While the machine is not in use carefully inspect the rope for damage and tears. Carefully inspect connection of rope ends and make sure that stitching (threads) are not torn or damaged. Do not use equipment until damaged rope has been replaced. 2. Upholstery Wipe down after every workout. Periodically take the time to use a mild soap or mild vinyl upholstery cleaner. Avoid using any abrasive cleaner not intended for use on vinyl. Keep sharp or pointed objects out of your pockets and clear of all upholstery. 3. Nuts/Bolts/Fasteners Periodically inspect all nuts and bolts. Tighten if needed. If bolts seem to loosen periodically, use Loctite 242 for a long-term cure. Go through a re-tightening sequence periodically to ensure that all hardware is properly tensioned. 4. Adjustments / Locking Pins / Tightening Knobs Check all pieces for signs of visible wear or damage. Check springs in Snap Links and Pop Pins for proper tension and alignment. If the spring sticks or has lost its rigidity, replace it immediately. 5. Anti-Skid Surfaces Replace if they appear worn or become slippery. 7. Warning Instruction Labels Inspect and familiarize yourself with all safety warnings and other user information on decals. Replace decals if damaged, illegible, or removed. 7 RX1500 ASSEMBLY INSTRUCTIONS & MANUAL 32-1029-M-REV.B WARRANTY We strive to offer the simplest and fastest resolution to all product related concerns. Our warranty service program gives its customers the option to return the product for repair, exchange or refund if the product is determined to be defective. · All products are warranted to the original purchaser. · Warranties apply and cover all defects in material and workmanship. Frame (excluding coating): Lifetime Rope, Sheaves, Bearings and Labor: One-Year Upholstery and Stitching: 90-Days Electronics: One-Year · Customer is responsible for the cost of shipment to HiPEQ. Company "ship to" address for product returns and service will be provided once the RMA has been issued. It will be at HIPEQ's discretion to determine the party responsible for cost of shipment back to customer. · Out-of-Warranty Products are repaired only with the customer's prior approval. · 15 Day 100% Satisfaction Guarantee includes full refund of purchase price, less shipping, handling and restocking fee equaling 15% of price during purchase. Email for more details. If you decide to return a HiPEQ product, simply email us within 15 days to ask for a return authorization number (RMA). Items must be returned in original condition and packaging and postmarked no later than 2 weeks after the date of return authorization. 8 If you have any questions regarding HIPEQ equipment or any instruction found in this document please call 650.549.5888 for assistance. 9