WEINTEK cMT-XMBS Standard Connection Box
Features
- Mounted outside the control cabinet or on a wall
- IP66-rated full enclosure protection
Specifications
| I/O Port | ||
|---|---|---|
| Cable Connector | 1 | |
| Wiring Terminal | 2 | |
| Enclosure | Plastic | |
| Dimensions WxHxD | 181.1 x 101.1 x 70 mm | |
| Weight | Approx. 0.4 kg | |
| Mount | Use four M4 screws, mounting hole size is 4.6 mm | |
| Protection Structure | IP66 | |
| Storage Temperature | -20° ~ 60°C (-4° ~ 140°F) | |
| Environment Operating Temperature | 0° ~ 55°C (32° ~ 131°F) | |
| Relative Humidity | 10% ~ 90% (non-condensing) | |
| Vibration Endurance | 10 to 25Hz (X, Y, Z direction 2G 30 minutes) | |
| Certificate | CE marked | |
Dimensions
Top View: Shows the top of the box. Dimensions are 181.1mm [7.13"] (width) and 101.1mm [3.98"] (depth). Includes a note: "4-Hole for Screw M4".
Front View: Shows the front of the box. Dimensions are 181.1mm [7.13"] (width) and 101.1mm [3.98"] (height).
Side View: Shows the side of the box. Dimensions are 70mm [2.76"] (depth) and 101.1mm [3.98"] (height).
Bottom View: Shows the bottom of the box with connection points labeled:
- a~d: Cable Glands (cable diameter: 4 ~ 8 mm)
- e: Cable Connector
- f: Wiring Terminal
- g: Wiring Terminal
Ordering Information
Optional:
Wiring Terminal Pin Assignment
f Wiring Terminal
| 24V Power | Emergency Stop Switch | Key Switch | Ground | ||
|---|---|---|---|---|---|
| 24V+ | STOP NC_1 | STOP COM_1 | KEY NO_1 | KEY COM_1 | FG |
| 24V- | STOP NC_2 | STOP COM_2 | KEY NC_1 |
g Wiring Terminal
| 3-Position Enable Switch | RS-485 | LAN | Detect / GND | ||||||
|---|---|---|---|---|---|---|---|---|---|
| ENABLE NO_1 | ENABLE COM_1 | 4W_TX+ | 4W_TX- | LAN_TX+ | LAN_TX- | Detect/ GND | |||
| 2W_DATA+ | 2W_DATA- | LAN_RX+ | LAN_RX- | DET_24V | GND | ||||
