MOBAPAD ChiTu Controller User Guide
This guide provides detailed information on using your MOBAPAD ChiTu controller.
Controller Layout
Extremely Designed by Victors Sence
Front View:
- Left Analog Stick
- D-pad (Directional Pad)
- Left Function Buttons: Minus [-], Capture, Home
- Left Shoulder Buttons: L, ZL
- Left Analog Stick Button (L3)
- Right Analog Stick
- A, B, X, Y Buttons
- Right Function Buttons: Plus [+], Home, Capture
- Right Shoulder Buttons: R, ZR
- Right Analog Stick Button (R3)
- Turbo Button
- Sync Button
- USB-C Port (located at the top)
Diagram Description: The controller features two analog sticks, a D-pad, face buttons (A, B, X, Y), shoulder buttons (L, R), trigger buttons (ZL, ZR), a Home button, a Capture button, Minus [-] and Plus [+] buttons, a Turbo button, and a Sync button. A USB-C port is located at the top center.
Connecting to the Switch
Steps:
- On your Nintendo Switch console, navigate to System Settings.
- Go to Controllers and Sensors.
- Select "Turn off Pro Controller Wired Communication".
- Press and hold the SYNC button on the MOBAPAD controller for 3 seconds to enter pairing mode. The controller's LED lights will flash.
- On the Switch console, select Controllers > Change Grip/Order.
- The controller will connect automatically.
Diagram Description: An illustration shows the Nintendo Switch console with detached Joy-Cons and the MOBAPAD controller. An arrow indicates the connection process from the controller to the console.
Turbo Function
Setting Turbo: Press and hold the desired button, then press and hold the TURBO button. The controller will vibrate briefly to confirm.
Canceling Turbo: Press and hold the button with turbo set, then press and hold the TURBO button again. The controller will vibrate briefly to confirm.
Adjusting Turbo Speed:
- Increase Speed: Hold TURBO + UP directional button.
- Decrease Speed: Hold TURBO + DOWN directional button.
Turbo Modes:
| Button Combination | Function | Description |
|---|---|---|
| Button + TURBO | Set Turbo | Sets the turbo function for the pressed button. |
| Button + TURBO (hold) | Cancel Turbo | Cancels the turbo function for the pressed button. |
| TURBO + UP | Increase Speed | Increases the turbo speed. |
| TURBO + DOWN | Decrease Speed | Decreases the turbo speed. |
| TURBO + LEFT | Turn off Turbo | Turns off all turbo functions. |
| TURBO + RIGHT | Turn on Turbo | Turns on all turbo functions. |
Wake Up & Reconnect
To wake the controller: Press the HOME button. To reconnect a disconnected controller: Press the SYNC button.
Diagram Description: An illustration highlights the HOME button on the controller for waking it up.
NFC Sense
How to Use: The NFC sensor is located on the controller's right handle. Place your Amiibo or other NFC-enabled device on the indicated area to activate the NFC function.
Diagram Description: An illustration shows the controller with a circular area on the right handle highlighted as the "NFC sensing area".
Light Adjustment
Adjusting Brightness: Press and hold the TURBO button, then press the UP or DOWN directional buttons.
Changing Color: Press and hold the TURBO button, then press the LEFT or RIGHT directional buttons.
Cycling Modes: Press and hold the TURBO button, then press the PLUS (+) button to cycle through LED modes (e.g., breathing, static, off).
Light Settings:
| Button Combination | Function | Description |
|---|---|---|
| TURBO + UP/DOWN | Brightness | Increase/Decrease LED brightness. |
| TURBO + LEFT/RIGHT | Color | Cycle through LED colors (Red, Green, Blue, Yellow, Cyan, Purple, White). |
| TURBO + PLUS (+) | Mode | Cycle through LED modes (Breathing, Static, Off). |
Battery Indicator
The controller's LED lights indicate battery status:
- Low Battery: Lights flash red.
- Charging: Lights pulse red.
- Fully Charged: Lights are solid green.
Diagram Description: An illustration highlights the LED indicators on the controller.
ON & OFF
To Turn On: Press and hold the HOME button for 3 seconds.
To Turn Off: Press and hold the HOME button for 5 seconds.
The controller will automatically turn off after 10 minutes of inactivity.
Diagram Description: An illustration highlights the HOME button on the controller for power functions.
Macro (Local Setup)
The macro function allows recording and playback of button sequences on the back buttons (M1, M2).
To Set Up a Macro:
- Press and hold the M1 or M2 button for 3 seconds to enter macro recording mode (LED indicator will flash).
- Press the desired buttons in sequence.
- Press the M1 or M2 button again to save the macro (LED indicator will stop flashing).
To Clear a Macro: Press and hold the M1 or M2 button for 5 seconds.
Diagram Description: An illustration shows the back of the controller with the M1 and M2 buttons highlighted.
Important Notes:
- Macros can be recorded for standard buttons: A, B, X, Y, D-pad directions, L, R, ZL, ZR, SL, SR.
- Macros cannot be recorded for analog sticks, HOME, Capture, Minus, Plus, or Turbo buttons.
- The maximum number of buttons per macro is 16.
Macro Auto-Loop
To Activate Macro Auto-Loop:
- Set up a macro using M1 or M2 as described above.
- Press and hold the M1 or M2 button for 5 seconds to enter auto-loop mode (LED indicator will flash rapidly).
To Exit Auto-Loop Mode: Press and hold the M1 or M2 button for 5 seconds again (LED indicator will return to normal).
Diagram Description: An illustration shows the controller with M1/M2 buttons highlighted for auto-loop function.
Note: The auto-loop function will repeat the recorded macro indefinitely until manually stopped.
After-Sale Service
Feel free to reach out to us if you encounter any concerns or issues with MOBAPAD controller. We are committed to addressing your needs and ensuring your satisfaction within a year.
Contact: zhangzk@mopaigame.com
