MEAN WELL HLG-320H Series 320W Constant Voltage Plus Current LED Driver Owner's Manual

Owner's Manual for MEAN WELL models including: HLG-320H Series, HLG-320H Series 320W Constant Voltage Plus Current LED Driver, 320W Constant Voltage Plus Current LED Driver, Voltage Plus Current LED Driver, Current LED Driver, LED Driver
HLG-320H

欧诗全

HLG-320H-36A MEAN WELL - RADIOMAG GmbH
HLG-320H-24B Mean-Well USA, Inc. - RADIOMAG GmbH
File Info : application/pdf, 10 Pages, 916.10KB
hlg320hspec
H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

User's Manual

(except for AB,C-type) (except for C-type)



Bauar t gepruft Sicherheit
egelma ge od o s be wac g
www. tuv.com ID 2000000000

IS 15885

THOMAS SAMUEL

THOMAS SAMUEL

    IP65 IP67

 

(NOTE 13)
 

 I   

 

           

 

 

                                                                 

current output. HLG-320H operates from 90305VAC and offers models with different rated voltage ranging

between 12V and 54V. Thanks to the high efficiency up to 94%, with the fanless design, the entire series is able to operate for -40 ~ +90 case temperature under free air convection. The design of metal housing

and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. HLG-320H is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system.

       

   

 
 B 
C
D

   




     
 


   




Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

SPECIFICATION

MODEL

HLG-320H-12 HLG-320H-15 HLG-320H-20 HLG-320H-24 HLG-320H-30 HLG-320H-36 HLG-320H-42 HLG-320H-48 HLG-320H-54

DC VOLTAGE

12V

CONSTANT CURRENT REGION Note.4 6 ~12V

RATED CURRENT

22A

RATED POWER

264W

RIPPLE & NOISE (max.) Note.2 150mVp-p

15V 7.5 ~ 15V 19A 285W 150mVp-p

20V 10 ~ 20V 15A 300W 150mVp-p

24V 12 ~ 24V 13.34A 320.16W 150mVp-p

30V 15 ~ 30V 10.7A 321W 200mVp-p

36V 18 ~ 36V 8.9A 320.4W 250mVp-p

42V 21 ~ 42V 7.65A 321.3W 250mVp-p

48V 24 ~ 48V 6.7A 321.6W 250mVp-p

54V 27 ~ 54V 5.95A 321.3W 350mVp-p

OUTPUT

VOLTAGE ADJ. RANGE

Adjustable for A/C-Type only (via built-in potentiometer) 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 21 ~ 26V 26 ~ 32V

32 ~ 39V

CURRENT ADJ. RANGE

Adjustable for A/AB/C-Type only (via built-in potentiometer) 11 ~ 22A 9.5 ~ 19A 7.5 ~ 15A 6.67 ~ 13.34A 5.35 ~ 10.7A 4.45 ~ 8.9A

VOLTAGE TOLERANCE Note.3 ±3.0%

LINE REGULATION

±0.5%

±2.0% ±0.5%

±1.5% ±0.5%

±1.0% ±0.5%

±1.0% ±0.5%

±1.0% ±0.5%

LOAD REGULATION

±2.0%

±1.5%

±1.0%

±0.5%

±0.5%

±0.5%

SETUP, RISE TIME Note.6 2500ms,80ms/115VAC 600ms,80ms/230VAC

HOLD UP TIME (Typ.)

15ms / 115VAC, 230VAC

38 ~ 45V
3.8 ~ 7.65A ±1.0% ±0.5% ±0.5%

43 ~ 52V
3.35 ~ 6.7A ±1.0% ±0.5% ±0.5%

49 ~ 58V
2.97 ~ 5.95A ±1.0% ±0.5% ±0.5%

VOLTAGE RANGE

90 ~ 305VAC 127 ~ 431VDC Note.5 (Please refer to "STATIC CHARACTERISTIC" section)

FREQUENCY RANGE

47 ~ 63Hz

POWER FACTOR (Typ.)

PF0.98/115VAC, PF0.95/230VAC, PF0.94/277VAC @ full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20% (@ load50% / 115VAC,230VAC; @ load75% / 277VAC)

TOTAL HARMONIC DISTORTION

INPUT

(Please refer to "TOTAL HARMONIC DISTORTION (THD)" section)

EFFICIENCY (Typ.) (230Vac) 91%

92.5%

93.5%

94%

94%

94.5%

95%

95%

95%

EFFICIENCY (Typ.) (277Vac) 91.5%

93%

94%

94.5%

94.5%

95%

95%

95%

95%

AC CURRENT (Typ.)

3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC

INRUSH CURRENT(Typ.)

COLD START 70A(twidth=1010s measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A CIRCUIT BREAKER

1 unit (circuit breaker of type B) / 2 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT

<0.75mA / 277VAC

OVER CURRENT

Note.4 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed

PROTECTION SHORT CIRCUIT OVER VOLTAGE

OVER TEMPERATURE

WORKING TEMP.

MAX. CASE TEMP.

ENVIRONMENT

WORKING HUMIDITY STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

Hiccup mode, recovers automatically after fault condition is removed 14 ~ 17V 17.5 ~ 21V 22.5 ~ 27V 27 ~ 33V 33 ~ 37V 40 ~ 46V Shut down and latch off o/p voltage, re-power on to recover Shut down and latch off o/p voltage, re-power on to recover Tcase= -40 ~ +90 (Please refer to "OUTPUT LOAD vs TEMPERATURE" section) Tcase= +90 20 ~ 95% RH non-condensing -40 ~ +80, 10 ~ 95% RH ±0.03%/ (0 ~ 50)

46.5 ~ 53V

53.5 ~ 60V

59 ~ 65V

VIBRATION

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY STANDARDS

UL8750(type"HL"), CSA C22.2 No. 250.0-08; BS EN/EN/AS/NZS 61347-1, BS EN/EN/AS/NZS 61347-2-13 independent; GB19510.1,GB19510.14; IP65 or IP67 (except for HLG-320H C-type); J61347-1, J61347-2-13 (except for C-type), EAC TP TC 004;KC61347-1,KC61347-2-13(except for AB,C-type), BIS IS 15885(Part2/Sec13) (NOTE 13) approved

SAFETY & EMC

WITHSTAND VOLTAGE ISOLATION RESISTANCE
EMC EMISSION

I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH
Compliance to BS EN/EN55015, BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2 Class C (@ load50%) ; BS EN/EN61000-3-3,GB/T 17743 , GB17625.1,EAC TP TC 020

EMC IMMUNITY

Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV), EAC TP TC 020

MTBF

1702.2K hrs min. Telcordia SR-332 (Bellcore) ; 157.2K hrs min. MIL-HDBK-217F (25)

OTHERS DIMENSION

252*90*43.8mm (L*W*H)

PACKING

1.88Kg; 8pcs/16Kg/0.92CUFT

NOTE

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. Please refer to "DRIVING METHODS OF LED MODULE".

5. De-rating may be needed under low input voltages. Please refer to "STATIC CHARACTERISTIC" sections for details.

6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

7. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

(as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)

8. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without permanently

connected to the mains.

9. This series meets the typical life expectancy of >62,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75 or less.

10. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com. 11. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft).

12. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

13. BIS certification is for HLG-320H-A only, but products sourced from Taiwan do not have the BIS logo, please contact your MEAN WELL sales for

more information.

14. For A/AB type need to consider build in using to comply with Type HL application. Downloaded from Arrow.coPmro.duct Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

BLOCK DIAGRAM

EMI FILTER

I/P

&

RECTIFIERS

FG

PFC CIRCUIT

POWER SWITCHING

PFC CONTROL

O.L.P.

PWM & PFC CONTROL

RECTIFIERS &
FILTER

Fosc : 65KHz

O.L.P.
DETECTION CIRCUIT
O.V.P.

+V
-V
DIM+ DIM(B Type)

DRIVING METHODS OF LED MODULE
 This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

Vo(%)

100
50 (min.)

(A) Constant Voltage area

(B) Constant
Current area

In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Should there be any compatibility issues, please contact MEAN WELL.

(C) Hiccup Protection

50

100

Io (%)

Typical output current normalized by rated current (%)

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

DIMMING OPERATION

FG (Green/Yellow)
AC/L(Brown) AC/N(Blue)

HLG-320H

DIM+(Purple) DIM-(Pink) +V(Red) -V(Black)

 3 in 1 dimming function (for B/AB-Type)
·Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 1 ~ 10VDC, or 10V PWM signal or resistance.
·Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. ·Dimming source current from power supply: 100A (typ.)

 Applying additive 1 ~ 10VDC

100%

+V +

90%

+

80%

Output current (%)

-V

-

70%

-

60%

DIM+ +

50%

Additive Voltage

40%

-

30%

DIM-

20%

"DO NOT connect "DIM- to -V"

10% 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input: Additive voltage

 Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

+V +

+

-V

-

DIM+

Additive PWM signal

DIM-

"DO NOT connect "DIM- to -V"

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input

 Applying additive resistance:

+V +

+

-V

-

DIM+

Additive Resistance

DIM-

"DO NOT connect "DIM- to -V"

Output current (%)

100% 90% 80% 70% 60% 50% 40% 30% 20% 10%
10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity forsynchronized dimming operation) Dimming input: Additive resistance

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

Note: In the case of turning the lighting fixture down to 0% brightness, please refer to the configuration as follow, or please contact MEAN WELL for other options.

N FG L

Relay

Switch

Adjuster

10K/N~100K/N Ohms resistance 1~10V DC Voltage 10V PWM Signal

Green/ Yellow
Brown
Blue

AC/L AC/N

HLG-320H B-Type

DIM+ DIM-
V(-) V(+)

Using a switch and relay can turn ON/OFF the lighting fixture.

LED Lighting Fixture

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

LOAD (%)

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

OUTPUT LOAD vs TEMPERATURE(Note.10)

PF
LOAD (%)

230VAC

100

100

80

80

60

110VAC

60

40

40

20

20

-40 -25 -10

0

15

30

50

60

AMBIENT TEMPERATURE,Ta ()

70 (HORIZONTAL)

-40 -25 0

20

45

55

65

75

90 (HORIZONTAL)

Tcase ()

STATIC CHARACTERISTICS
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz
 De-rating is needed under low input voltage.

POWER FACTOR(PF) CHARACTERISTIC
Tcase at 80

1 0.98 0.96 0.94 0.92 0.9 0.88 0.86 0.84
50%

Constant Current Mode

60% 70% 80% 90% 100%

LOAD

(320W)

277VAC 230VAC 115VAC

TOTAL HARMONIC DISTORTION (THD)

 48V Model, Tcase at 80

16

14

12

10

8

6

4

2

0

50%

60%

70%

80%

LOAD

277VAC 230VAC 115VAC
90% 100%

EFFICIENCY (%)

EFFICIENCY vs LOAD

HLG-320H series possess superior working efficiency that up to 95% can be reached in field applications.  48V Model, Tcase at 80

97 95 93 91 89 87 85 83 81 79 77 75
10%

20%

30%

40%

50%

60%

70%

80%

90% 100%

277VAC 230VAC 115VAC

LOAD

LOAD (%)

THD(%)

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

LIFE TIME

LIFETIME(Kh)

120

100

80

60

40

20

0

20

30

40

50

60

70

80

90

Tcase ( )

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

MECHANICAL SPECIFICATION

Blank/D-Type
13.4 8.9

252 225.2

17

300±20

FG (Green/Yellow)

90

40

AC/L(Brown)

tc

AC/N(Blue) SJOW 17AWG&H05RN-F 1.0mm2*3C

45

17

tc : Max. Case Temperature

Case No.202A Unit:mm Tolerance:±1

112.6

4.5×4PL

300±20
SJOW 17AWG&05RN-F 1.0mm2*2C (SJOW 14AWG*2C for 12V~30V)

+V(Red) -V(Black)

43.8

A-Type
13.4 8.9
300±20 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG&H05RN-F 1.0mm2*3C

17

40

90

252 225.2

tc

112.6

Io Vo

ADJ. ADJ.

45

17

tc : Max. Case Temperature

4.5×4PL

300±20
SJOW 17AWG&05RN-F 1.0mm2*2C (SJOW 14AWG*2C for 12V~30V)

+V(Red) -V(Black)

43.8

B-Type
13.4 8.9
300±20 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG&H05RN-F 1.0mm2*3C

17

40

90

252 225.2

tc

112.6

45

17

tc : Max. Case Temperature

4.5×4PL 300±20

UL2517 20AWG*2C
SJOW 17AWG&05RN-F 1.0mm2*2C (SJOW 14AWG*2C for 12V~30V)

DIM+(Purple) DIM-(Pink)
+V(Red) -V(Black)

43.8

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

AB-Type
13.4 8.9
300±20 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) SJOW 17AWG&H05RN-F 1.0mm2*3C

17

40

90

252 225.2

tc

112.6

Io

ADJ.

45

17

tc : Max. Case Temperature

4.5×4PL 300±20
UL2517 20AWG*2C
SJOW 17AWG&05RN-F 1.0mm2*2C (SJOW 14AWG*2C for 12V~30V)

DIM+(Purple) DIM-(Pink)
+V(Red) -V(Black)

43.8 43.8

C-Type
13.4 8.9

4.5

17

1

40

I/P

2

3

9.25 11

17

4.5

7.5

65 90

45

252 225.2

tc

112.6

1

O/P

2

Io Vo

ADJ. ADJ.

4.5×4PL

4.5×4PL

237

AC Input Terminal Pin No. Assignment

Pin No. Assignment

1

FG

2

AC/L

3

AC/N

DC Output Terminal Pin No. Assignment

Pin No. Assignment

1

+V

2

-V

Downloaded from Arrow.com.

File Name:HLG-320H-SPEC 2025-01-09

H L G - 3 2 0 H 320W Constant Voltage + Constant Current LED Driver

series

WATERPROOF CONNECTION
 Waterproof connector Waterproof connector can be assembled on the output cable of HLG-320H to operate in dry/wet/damp or outdoor environment.

AC

source

I/P

HLG-320H
O/P

Size

Pin Configuration (Female)

Size

Pin Configuration (Female)

M12
Order No. Suitable Current

4-PIN 5A/PIN M12-04 10A max.

 Cable Joiner

66 26 20

5-PIN 5A/PIN M12-05 10A max.

M15
Order No. Suitable Current

2-PIN 12A/PIN M15-02 12A max.

CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG

LED Lamp

Up to four wires can be connected through this cable joiner by soldering or clamping by tools.

25 90 61 8.5 32 8.5 6 35 43.8

HLG-320H

O/P Wires

 CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2.
 Junction Box Option
225.2 387.2

FG (Green/Yellow)
AC/L(Brown) AC/N(Blue)

3- PF 1/2" 150±20

 Junction box option is available for A / Blank - Type. Please contact MEAW WELL for details.
INSTALLATION MANUAL
Please refer to : http://www.meanwell.com/manual.html
Downloaded from Arrow.com.

LED Lamp

76

10

5

+V -V

3- PF 1/2" 150±20

2-5

86

File Name:HLG-320H-SPEC 2025-01-09
HLG-320H

欧诗全

References
