Home
User Manual for Telran models including: 980452 Optical Cable Measuring Tester, 980452, Optical Cable Measuring Tester, Cable Measuring Tester, Measuring Tester, Tester
Optical Cable Measuring Tester
File Info : application/pdf, 4 Pages, 864.60KB
DocumentDocumentp.n. 980452 Optical Cable Measuring Tester Underground Wire Locator 1. Helpful-loca ting & tracking buried and hidden wires 2. Easily locate pet fence wires, metals pipes, electrical wires, etc. 3. Wire tracer range-up to 2 feet deep and 1000 feet in length. 4. Power: Rechargeable Lithium battery. Transmitter specifications Tone frequency The Max length distance The Max depth distance The Max. working current Tone mode Max. signal voltage Signal display Voltage protection Battery type Dimensions (LxWxD) 200kHz 2000 feet 3 feet Less than 70mA 1 Tone 15Vp-p Signa l tone, Antenna DC48V 3.7V Lithium battery 49 x 13 5 x 3 3 mm Receiver specifications Frequency The Max. working current Earphone jack Battery type Dimensions (LxWxD) 200k H Less than 70mA 1pcs 3.7V Lithium battery 43 x 168 x 27mm 19 Hayezira St. Industrial Zone Ramla 7255616 www.telran.co.il | office@telran.co.il | fax. 03-5214524 Technical support *2023 | phone: 03-5575110 Page 1 Product Introduction User Manual It can be used to buried sprinkler valve, wire tracker, dog fence wire break locator, Function comparison Description Power supply for transmitter Power supply for Receiver Trace underground cable pipe Depth range Max cable length Working environment 980452 3.7V Lithium Battery 3.7V Lithium Battery 0.8m (2.6 feet) 500m (1640 feet) NO/Low voltage Instruction for Keys and Ports 1 Transmitter LED Status LED 8 9 LED Flash Light 10 11 ON/OFF Switch 19 Hayezira St. Industrial Zone Ramla 7255616 www.telran.co.il | office@telran.co.il | fax. 03-5214524 Technical support *2023 | phone: 03-5575110 Page 2 Main features 1. 2. 3. 4. How to use 1. independent ground using a grounding stake or screwdriver, 3. other one to an Once the path is determined, mark the ground at the zero point on the path. 6. Angle the receiver antenna 45 degrees from the ground and move away from The distance between the two marks is the approximate depth of the wire. Note 1. For single-core or double-core wire: Red alligator clips is the signal line, Black alligator clips is used to connect the ground or neutral line unloaded. 2. For shielded wire and multi-stranded wire: A: Unable to determine break-point due to signal interference, but line direction can be tested. B: If it is the direction of the shielded wire detection line, the red clip should grip the shielding layer. Fig.01 How to properly install the battery? You need to organize the battery line and put them on the front of the battery, PLEASE DO NOT put the battery line on top. How to Enhance the Signal? To enhance the signal you can make the ground stud and connect it. (Screw knives or metal slices can be used as a medium for ground studs). How to find the wire locates? Turn on the receiver and swing it back and forth. You will hear the sound "bi bi bi"; When approaching the breakpoint, the tone will weaken and then disappear. If the tone disappears. It means the breakpoint is at this location. 19 Hayezira St. Industrial Zone Ramla 7255616 www.telran.co.il | office@telran.co.il | fax. 03-5214524 Technical support *2023 | phone: 03-5575110 Page 3 External Earphones Equipped a pair of Earphones that can be connected to the receiver Earphone jack to improve efficiency in a noisy environment. (Fig.02) White LED Flash-Light The user can activate the LED flash-light by pressing the 'Push For Light' button. (Fig.03) Fig.02 Product Parameters The Max. working current Tone Fig.03 < 350mA 500m (1640 feet) The Max. working current pc Tool Bag pc pc < 350mA pc pc 19 Hayezira St. Industrial Zone Ramla 7255616 www.telran.co.il | office@telran.co.il | fax. 03-5214524 Technical support *2023 | phone: 03-5575110 Page 4