User Manual for INOGENI models including: SHARE2, SHARE2U, SHARE2U USB Camera Mixer, SHARE2U, USB Camera Mixer, Camera Mixer, Mixer
SHARE-2 CAMERA VOA COMP RS-232 (RJ-45 to RJ-45) RS232 REMOTE SHARE SHARE2U R sw RS232 CAM 300 RS-232 (Terminal Block to RJ-45) RS-232 (Terminal Block to RJ-45)
REMOTE User manual How it works? The INOGENI REMOTE is a device that can control the mixing function of SHARE2/SHARE2U and the switching function of CAM-300 devices. You just need to apply correct wiring between the REMOTE and the INOGENI device. You will then be able to communicate with the device using the push buttons at the top of the device. Connectivity For SHARE2 Use a simple RJ45 cable For SHARE2U and CAM-300 Use a RJ45 cable to a terminal block plug. Do not plug the cable to the LAN connection of the SHARE2. Plug it to the RS232 port. Do not plug a RJ45 cable between the SHARE 2U or CAM300 device and the REMOTE. INOGENI device side REMOTE side Pin 1: Receive Pin 2: GND Pin 3: Transmit Pin 4: 5V supply Regarding +5V supply for REMOTE: Under SHARE2/SHARE2U and CAM300, make sure to put switch number 6 to ON position. Technical support If you need any support on how to operate this device, contact us at support@inogeni.com for further assistance. Contact us Come visit us if you have special needs or requirements. We are your specialists for custom USB 3.0, HDMI and SDI professional products tailored to your needs. INOGENI, Inc. 979 Ave de Bourgogne Suite 530 Québec G1W 2L4 (QC) Canada © Copyright 2022. INOGENI, Inc. All rights reserved. INOGENI REMOTE User Manual Version 2.1 July 2022PDFium PDFium