Introduction
Thank you for choosing the GIANT SCALE P-47 RAZORBACK 50-61cc/EP ARF by SG MODELS. This semi-scale airplane is designed for intermediate to advanced sport flyers, offering ease of flight and quick assembly. Much of the work, including motor mount and hinges, is pre-installed, making the assembly process enjoyable.
This manual is your guide to building a great flying airplane. Please read it thoroughly before starting assembly. Refer to the parts listing to identify all components.
Important Warning
This aeroplane is not a toy. Incorrect assembly or use can cause injury to people or property. By flying this aeroplane, you assume all risk and responsibility.
For those new to R/C flying, it is recommended to contact your R/C supplier or join a local R/C Model Flying Club. These clubs offer training and guidance for successful R/C flight, along with advice on insurance and safety regulations.
Kit Contents
The kit includes all major components for the Giant Scale P-47 Razorback. Key parts include:
- Fuselage
- Wing set (2)
- Tail set (2)
- Canopy
- Cowling
- Wing tube
- Pilot
- Landing gear
- Fuel tank
- Tail wheel
- Pushrod set
- Ep Motor box
- Bomb and gun
Additional Items Required
- 50-61cc gasoline engine
- Computer radio (9-12 channel with 13 servos)
- Glow plug
- Propeller
- Protective foam rubber for radio system
- Aircraft shelves
Tools & Supplies Needed
- Cyanoacrylate glues (thin and medium)
- Epoxy (5-minute and 30-minute)
- Drill (hand or electric) with assorted bits
- Modelling knife
- Straight edge ruler
- 2mm ball driver
- Phillips head screwdriver
- 220 grit sandpaper
- 90° square or builder's triangle
- Wire cutters
- Masking tape & T-pins
- Thread-lock
- Paper towels
Assembly Steps Overview
The manual details the assembly process through clear, numbered steps with accompanying diagrams. Key assembly stages include:
- Installing the Ailerons Control Horn
- Installing the Aileron Servos
- Installing the Flap Pushrod
- Installing the Landing Gear
Follow each step carefully for optimal results.
Seagull Models Manufacturing and Trading Company Co.,Ltd
