Installation Guide for Danfoss models including: SVA-HS, SVA-ST 200, SVA-X1 200, SVA-DH 250-300, SVA-DL 250-300, FIA 200-300, Shut off Valve and Strainer, Shut off Valve, Shut off Strainer, Valve and Strainer, Strainer
148R9538 148R9538 Installation guide Shut-off valve and Strainer SVA-HS, SVA-ST 200, SVA-X1 200, SVA-DH 250-300, SVA-DL 250-300, FIA 200-300 089 0879 PLEASE NOTE! To protect the top gasket the bolts are not tightened to the full torque from factory. A new gasket has been inserted after pressure testing in the factory and the bolts are only partly tightened. No matter which method of mounting is used the bolts must be retightened to the full torque indicated in the instruction before plant pressure test or commissioning. BEMÆRK! For at beskytte top pakningen er boltene ikke tilspændt med det endelige moment fra fabrikken. Efter trykprøvning i fabrikken er en ny pakning isat og boltene kun delvist spændt. Uanset monteringsmetode skal boltene spændes til det i instruktionen angivne moment inden trykprøvning eller ibrugtagning af anlægget. Info for UK customers only : Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB : " " 04080, 80, / 168, © Danfoss | Climate Solutions | 2022.06 AN00008641684801-000201 | 1Danfoss A/S Adobe PDF Library 7.0