Terminal Location Overview
This document details the terminal locations for Danfoss VLT drive frames F2 and F4. Dimensions are provided in millimeters [inches] and are referenced from a common zero point unless otherwise specified.
Terminal Locations - Front View
Details the terminal arrangement as seen from the front of the drive frame.
| Terminal Type | Dimensions (mm [inches]) |
|---|---|
| Earth Ground Bar | 0.0 [0.00] |
| Motor Terminals | Multiple points from 66.4 [2.61] to 1059.4 [41.71] |
| Brake Terminals | 0.0 [0.00] and 1025.7 [40.38] |
Terminal Locations - Left View
Details the terminal arrangement as seen from the left side of the drive frame.
Key structural dimensions:
- Ø14.0 [0.55]
- 308.25 [12.13582677165]
- 253.0 [9.96]
- 180.3 [7.10]
- 0.0 [0.00]
| Terminal Type | Dimensions (mm [inches]) |
|---|---|
| Motor Terminals | Multiple points from 0.0 [0.00] to 465.6 [18.33] |
| Brake Terminals | Multiple points from 0.0 [0.00] to 465.6 [18.33] |
Terminal Locations - Right View
Details the terminal arrangement as seen from the right side of the drive frame.
| Terminal Type | Dimensions (mm [inches]) |
|---|---|
| Motor Terminals | Multiple points from 0.0 [0.00] to 465.6 [18.33] |
| Brake Terminals | Multiple points from 0.0 [0.00] to 465.6 [18.33] |
General Notes and Specifications
- Fastener Torques: Refer to 175R5600 CLASS A, unless otherwise specified.
- Dimensional Interpretation: Per ASME Y14.5M-1994.
- Units: Millimeters.
- Projection: Third Angle Projection.
- Critical Characteristics: Marked with ◯.
- Key Characteristics: Marked with □.
- Inspection: Marked with △.
- Compliance: RoHS Directive 2011/65/EU.
Manufacturer Information
Manufacturer: Danfoss A/S
Drawing Number: 177R0037
Model Designation: F2-IC
Revision: 005
Confidentiality: Confidential property of Danfoss A/S. Unauthorized copying or distribution is prohibited.
