Flamma FX10 Portable Modeling Headphone Amps Owner's Manual

Precautions

*PLEASE READ CAREFULLY BEFORE PROCEEDING*

Power Supply

Please use PC USB port or use 5V 1A power adapter to power the product. Unplug the power when not in use or during electrical storms.

Location

To avoid deformation, discoloration, or other serious damage, do not expose this unit to the following conditions:

Direct sunlight
Magnetic fields
Excessive dusty or dirty location
Strong vibrations or shocks
Heat sources
Extreme temperature or humidity
High humidity or moisture

Cleaning

Clean only with a soft, dry cloth. If necessary, slightly moisten the cloth. Do not use abrasive cleanser, cleaning alcohol, paint thinners, wax, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

Features

14 different amp models with individual save function
14 built-in effects with parameter adjustment
5 levels of TONE color
28 different drum groove options to select from
Compatible with Bluetooth for audio playback
Supports USB AUDIO recording and audio playback

Layout

Device Layout

The Flamma FX10 features the following components:

01: 1/4" Instrument Input Jack: Connects to the output of the guitar.
02: Volume Control: Rotate to adjust the volume level of the guitar and drum machine.
03: Three-way Power Switch: OFF (Power off), ON (Power on, Bluetooth off), BT ON (Bluetooth on). The power indicator shows current power status.
04: AMP Button: Press to select AMP module (preset patch), then use the -/+ buttons to select between 14 different amp models. The LED color indicates the selected amp model.
05: TONE Button: Press to select TONE module. Use the -/+ buttons to switch between 5 different tone colors.
06: EFX Button: Press to select EFFECT module. Use the -/+ buttons to switch between different effects. Press and hold the EFX button to bypass effects. Press and hold again to enter hidden mode for parameter adjustment.
07: DRUM Button: Press to turn the drum machine on/off. The LED indicator shows the drum machine status. When the drum machine is on, press DRUM to cycle through three parameter adjustment modes: RED for drum groove, GREEN for volume level, and BLUE for speed. Adjust parameters using the -/+ buttons.
08: -/+ Buttons: Adjust currently selected modules (AMP/TONE/EFX/DRUM).
09: 1/8" TRS Headphone Jack: Connect to a headphone device.
10: USB-C Port: For charging and OTG function (supports USB audio recording and playback).

Instructions

1. Start

Toggle the power switch to the ON position. The power indicator will illuminate and turn blue when power is on. Toggle the switch to the Bluetooth icon to turn on Bluetooth Audio function.

2. Tone/Effect Adjustment

a. Select Amp Model

Press AMP to select the AMP module (preset patch), then press the -/+ buttons to select between 14 different amp models. The LED indicator color shows the currently selected amp model.

b. Adjust Tone Color

Press TONE to select the TONE module, then press -/+ buttons to switch between 5 different tone colors.

c. Select EFX

Press EFX to select the EFFECT module, then press the -/+ buttons to switch between different effects.

d. EFX Adjustment

Each effect has a hidden parameter adjustment mode with 10 different levels. When the EFFECT module is selected, press and hold EFX to enter hidden parameter adjustment mode, then press the -/+ buttons to adjust. The LED indicator color shows the currently selected level.

BUTTON	COLOR	VALUE
-	?	1
-	?	2
-	?	3
-	?	4
-	?	5
-	?	6
-	⚪	7
-	?	8
-	?	9
-	?	10

e. Bypass EFFECT

When the EFFECT module is selected (LED indicator is on), press the EFX button to bypass the EFFECT module.

f. Saving

When parameter adjustment is complete, the current tone is saved into the selected AMP module as a preset patch, including AMP type, TONE color, EFX On/Off, EFX type, and EFX hidden parameter.

Note: When a module (AMP/TONE/EFX) is selected, its corresponding LED indicator illuminates completely. Otherwise, it illuminates in half brightness.

3. Drum Machine

a. Turn On/Off

Press DRUM to turn the drum machine on. Press and hold DRUM to turn it off. The LED indicator shows the On/Off status.

b. Select Drum Groove

The FX10 has 28 drum grooves. When the drum machine is on, press DRUM to switch between three parameter adjustment modes. The LED indicator color shows the selected mode: RED for drum groove, GREEN for volume level, and BLUE for speed. Refer to the groove list for details.

c. Adjust Volume Level of Drum Machine

When DRUM is selected, press DRUM several times to enter volume level adjustment mode (LED indicator illuminates GREEN). Use the -/+ buttons to adjust the volume level. Refer to the LED color for adjustment.

BUTTON	COLOR	VALUE
-	?	1
-	?	2
-	?	3
-	?	4
-	?	5
-	?	6
-	⚪	7
-	?	8
-	?	9
-	?	10

d. Adjust Drum Machine Speed

When DRUM is selected, press DRUM several times to enter speed adjustment mode (LED indicator blinks BLUE). Use the -/+ buttons to adjust the speed by 1 BPM each time. Press and hold -/+ to increase or decrease speed quickly. Speed ranges from 40 BPM to 260 BPM.

The drum machine operation follows this sequence:

Start from "Drum Machine Off".
Press to "Select Drum Groove".
Press and hold to "Adjust Volume Level".
Press to "Adjust Speed".

4. Effect List

a. AMP Models

Number	LED Color	Reference
1	?	Fender® 65 Twin Reverb
2	?	Fender® 65 Deluxe Reverb
3	?	Acoustic guitar simulation
4	?	Fender® Super Sonic
5	?	Fender® 59 Bassman
6	?	DR.Z® Z-Wreck
7	⚪	Marshall® JCM800
8	?	Marshall® Plexi
9	?	VOX® AC30
10	?	ENGL® Powerball
11	?	Mesa Boogie® Mark V
12	?	Orange® AD 30
13	?	Soldano® SLO 100
14	?	EVH® 5150 III

*NOTES: All product names belong to their owners and are only used in this product and manual as a reference to tone types.

b. Tone

Number	LED Color	Descriptions
1	?	Darker
2	?	Dark
3	?	Flat
4	?	Bright
5	?	Brighter

c. EFX

Number	LED Color	Descriptions	Hidden Parameters
1	?	Room Reverb	Reverb Level
2	?	Hall Reverb	Reverb Level
3	?	Church Reverb	Reverb Level
4	?	Plate Reverb	Reverb Level
5	?	Spring Reverb	Reverb Level
6	?	Mod Reverb	Reverb Level
7	?	Slapback Delay	Delay Level
8	?	Tape Dly+Hall	Delay Level
9	?	Reverse Dly+ModReverb	Delay Time
10	?	PingPong Dly+Church	Delay Time
11	?	Chorus+Hall	Mod Depth
12	?	Phaser+Church	Mod Depth
13	?	Flanger+Plate	Mod Rate
14	?	Tremolo+Mod Reverb	Mod Rate

d. Groove

Number	LED Color	Groove	Rhythm
1	??	POP 1	4/4
2	??	POP 2	4/4
3	??	POP 3	4/4
4	??	POP 4	6/8
5	??	POP 5	3/4
6	??	BLUES 1	4/4
7	??	BLUES 2	4/4
8	??	BLUES 3	4/4
9	??	BLUES 4	6/8
10	?⚪	BLUES 5	6/8
11	⚪?	PUNK 1	4/4
12	??	PUNK 2	4/4
13	??	PUNK 3	6/8
14	??	ROCK 1	4/4
15	??	ROCK 2	4/4
16	??	ROCK 3	6/8
17	??	ROCK 4	6/8
18	??	METAL 1	4/4
19	??	METAL 2	4/4
20	??	METAL 3	4/4
21	??	METAL 4	6/8
22	??	FUNK 1	4/4
23	??	FUNK 2	4/4
24	?⚪	FUNK 3	4/4
25	⚪?	FUNK 4	4/4
26	??	JAZZ 1	4/4
27	??	JAZZ 2	4/4
28	?⚪	JAZZ 3	3/4

4. Bluetooth Audio

The FX10 supports Bluetooth for connecting to an external Bluetooth device for practice or performance. Follow these steps:

Toggle the power switch to BT ON to activate the Bluetooth module.
Open the Bluetooth menu on your smart device and select "Pair new device".
Find and select "FX10".
Confirm the connection.
After pairing, you can hear audio tracks from the external Bluetooth device.

Notes: To adjust the volume of playback tracks, adjust it on your external Bluetooth device. The FX10's volume knob only controls the volume of the guitar signal and drum machine.

5. OTG (USB AUDIO) Recording/Playback

The USB-C port on the FX10 supports USB AUDIO function. Connect the device using the provided USB cable and an OTG cable (sold separately) to your smartphone for recording or audio playback.

Notes: The USB AUDIO function is for audio recording or playback on mobile devices for practice or direct recording on social media. It cannot replace a professional audio interface. For use with DAWs on Windows devices, a third-party ASIO driver may be required, and compatibility issues might arise.

Note: To adjust the volume of playback tracks, please adjust it on your mobile device. The FX10's volume knob only controls the volume of the guitar signal and drum machine.

6. Battery and Charging

When the battery is low, the power LED indicator will blink blue, indicating the battery will run out in approximately 30 minutes. Charge the device promptly.

When the FX10 is OFF and charging, the power indicator illuminates RED. It turns GREEN when charging is complete. When the FX10 is ON and charging, the power LED indicator blinks BLUE and RED, then turns GREEN and BLUE when charging is complete.

Specifications

Number of AMP models: 14
Number of EFFECT modules: 14
Number of DRUM groove: 28
Bluetooth function: Audio playback
USB: USB-C port charging/OTG (USB audio)
Battery Capacity: 720mAh
Battery Life: Up to 4 hours
Charging Requirements: 5V 1A
Charging Time: Approximate 2.5 hours
Angle of Plugin Jack: 270°
Dimensions: 82mm (D) * 40mm (W) * 30mm (H)
Weight: 59g
Accessories: Quick guide, USB-C cable

	FLAMMA FX20 Portable Intelligent Modeling Headphone Amps Owner's Manual Comprehensive owner's manual for the FLAMMA FX20 Portable Intelligent Modeling Headphone Amps, detailing features, layout, instructions, effect lists, and specifications. Learn how to use its 52 amp models, 40 drum grooves, Bluetooth, and USB audio functions.
	FLAMMA FX20 Portable Intelligent Modeling Headphone Amps - Owner's Manual Comprehensive owner's manual for the FLAMMA FX20, a portable intelligent modeling headphone amplifier. Learn about its features, operation, layout, and effect list.
	Flamma FX100 Guitar Multi-Effects Owner's Manual Comprehensive owner's manual for the Flamma FX100 Guitar Multi-Effects pedal, detailing features, controls, connections, software, effects lists, and specifications.
	Flamma FB200 Intelligent Combined Effects Pedal Manual Comprehensive user manual for the Flamma FB200 Intelligent Combined Effects Pedal, covering important notes, safety instructions, performance overview, panel description, device connections, effect modules, operation modes, additional functions, tone descriptions, and technical specifications.
	FLAMMA FG200 Intelligent Combined Effects Pedal Owner's Manual This owner's manual provides comprehensive information on the FLAMMA FG200 Intelligent Combined Effects Pedal, covering safety precautions, performance features, panel layout, connection guides, effect module details, operation modes, additional functions like drum machine and tuner, tone descriptions, and technical specifications.
	FLAMMA FV04 Harmony Pedal: User Manual and Features Comprehensive user manual for the FLAMMA FV04 Harmony pedal, detailing its features, layout, instructions for use, and technical specifications. Learn about harmony modes, reverb effects, and connectivity.
	FLAMMA E1000 Intelligent Guitar Operating Manual Comprehensive operating manual for the FLAMMA E1000 Intelligent Guitar. Covers safety precautions, device layout, quick setup guide, detailed instructions for app integration, Bluetooth playback, direct recording, and silent practice. Includes full technical specifications.
	FLAMMA FS21 Drum Machine & Looper Pedal Owner's Manual Owner's manual for the FLAMMA FS21 Drum Machine & Looper Pedal, detailing features, layout, operation instructions, editor software, and technical specifications for this high-quality guitar effects pedal.