Installation Guide for thermaltake models including: Floe Ultra 240 RGB All-In-One Liquid Cooler, Floe Ultra 240 RGB, All-In-One Liquid Cooler, Liquid Cooler, Cooler
Floe Ultra 240 RGB All-In-One Liquid Cooler
Floe Ultra 240 RGB Parts List Scan Here Installation Guide B x2 LGA 1700 C x1 LGA 1200/115X D x1 E x1 F x2 LGA 2066/2011 G x4 LGA 1700/1200/115X H x4 I x4 A x1 J x8 K x8 L x1 Mx 1 Nx 1 Ox 1 P x 1 Qx 1 Rx 1 1 1700 C Intel Installation Guide 3 1700/1200/1156/1155/1151/1150 2066/2011-3/2011 1200/115X D I HG I L Black Silver G H H L 2 M C 1700 or D 1200/115X 1 Tighten screw I to the halfway. I E F AMD Installation Guide 2 3 Tighten screw I again to ensure your waterblock is secure enough. I L 1 K Installation Guide 2 Intel AMD A or A PUMP AIO_PUMP B J 3 stop Start Adjust the display to fit your PC build in clockwise rotation PUMP A AIO_PUMP LCD Display Setup Guide 1A 2 O O CAUTION To control the LCD display by TT RGB PLUS Software, please connect the water block and motherboard with cable O. 1N Controller Installation Guide 3 O 321 B 2 54 Comnect the fans to the controller. O Connect the controller cable onto the motherboard (USB 2.0 9 pin) and controller. 4 Set the DIP switch on the back side of the controller to assign the number of the controller NO.1 ON NO.2 ON NO.3 ON NO.4 ON 1234 NO.5 ON 1234 NO.6 ON 1234 NO.7 ON 1234 NO.8 ON 1234 NO.9 ON 1234 NO.10 ON 1234 NO.11 ON 1234 NO.12 ON 1234 NO.13 ON 1234 NO.14 ON 1234 NO.15 ON 1234 NO.16 ON 1234 1234 1234 1234 Q Q Connect the power cable to the 4pin Molex connecter and controller. 5 P P If you want to connect two or more controllers, you can sync the controllers with the bridge connector.Corel PDF Engine Version 3.0.0.739 CorelDRAW