HH Electronics
User Manual for HH ELECTRONICS models including: VRE-15G2, VRE-12G2, Full Range Passive Loudspeaker
26 февр. 2021 г. —
File Info : application/pdf, 6 Pages, 12.31MB
DocumentDocumentFULL RANGE PASSIVE SYSTEMS VRE-12G2 VRE-15G2 USER MANUAL Thank you for purchasing a HH Vector Passive Full Range Enclosure. The Vector series are professional specification cabinets designed to give exceptional dynamics, clarity and projection in all applications such as a portable PA. In order to take full advantage of it and enjoy long and trouble-free performance, please read this owner's manual carefully, and keep it in a safe place for future reference. 1) Read Instructions carefully before installing or operating this product. 2) Retain these instructions 3) Comply with warnings: All warnings and instructions for these products should be adhered to. 4) Unpacking: Please retain the packing carton and liners in case the unit should need to be returned at any time. 5) Amplifier connection. In order to avoid damage, it is advisable to establish and follow a pattern for turning on and off your sound system. With all system parts connected, turn on source equipment, tape decks, cd players, mixers, effects processors etc. BEFORE turning on your power amplifier. Many products have large transient surges at turn on and off which can cause damage to your speakers. By turning on your power amplifier LAST and making sure its level control are set to minimum any transients from other equipment will not reach your loudspeakers. Wait until all system parts have stabilised. This can usually take a couple of seconds. Similarly, when turning off your system always turn down the level controls on your power amplifier and then turn off its power before turning off other equipment. 6) Cables- never use a shielded or microphone cable for any speaker connections as this will not be substantial enough to handle the amplifier load and could cause damage to your complete system. 7) Caution: These professional loudspeaker systems are capable of generating very high sound pressure levels. Use care with placement and operation to avoid exposure to excessive levels that can cause permanent hearing damage. 9) Servicing: The user should not attempt to service these products. Refer all servicing to qualified service personnel. 35mm pole socket BASIC SETUP HH VRE cabs can be mounted on the floor, or a suitable pole or tripod. Don't over-extend poles/tripods; ensure at least 4 x the pole diameter is still inside the outer pole. Make sure the legs have a good splay on tripods, but do not obstruct doorways or other access-ways. 2 © 2021 HH Electronics Ltd (Stand not included) Designed and Engineered in the UK by HH Electronics LTD. 2 SPECIFICATION Model : VRE-12G2 Description : HH VECTOR - Moulded Passive Speaker System, 800W - 12" Woofer +1" CD Speaker Enclosure Power Rating : 800W Impedance : 8 ohm HF Driver : 1" Compression Driver LF Driver : 12" Woofer Sensitivity (1W/1M) : 96 dbSPL Coverage : 90°H X 40°V Cabinet : Robust polypropylene cabinet with three handles and monitor angle Finish : Black Grille : Powdercoated steel Other : 35mm Distance Pole Socket Socket Unit dimensions (HWD) : 58.5 x 36.5 x 32.5 CM 23" x 14.4" x 12.8" Unit weight : 8.3Kg, 18.3 lbs Carton dimensions (HWD) : 66 x 43.5 x 36 CM 26" x 17.1" x 14.2" , 0.103 M3 Packed weight : 11Kg, 24.3 lbs Speaker Enclosure Model : VRE-15G2 Power Rating : 800W Impedance : 8 ohm HF Driver : 1" Compression Driver LF Driver : 15" Woofer Sensitivity (1W/1M) : 97 dbSPL Coverage : 90°H X 40°V Cabinet : Robust polypropylene cabinet with three handles and monitor angle Finish : Black Grille : Powdercoated steel Other : 35mm Distance Pole Socket Unit dimensions (HWD) : 69 x 44 x 37 CM 27.2" x 17.3" x 14.6" Unit weight : 11.5Kg, 25.4 lbs Carton dimensions (HWD) : 76.5 x 50 x 41 CM 30.1" x 19.7" x 16.1" , 0.157 M3 Packed weight : 14.9Kg, 32.8 lbs In the interest of continued development, HH Electronics reserves the right to amend product specification without prior notification. 2 © 2021 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD. 3 2 © 2021 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD. 4 2 © 2021 HH Electronics Ltd Designed and Engineered in the UK by HH Electronics LTD. 5 FULL RANGE PASSIVE SYSTEMS hhelectronics hhelectronics hhelectronics Model number: Serial number: Place of purchase: www.hhelectronics.com Date of purchase: 12 REVISION 1.00