Quoizel | Artisans In Lighting
Installation Guide for QUOIZEL LIGHTING models including: PC 2818MBK Light 18 inch Matte Black Pendant, PC 2818MBK, Light 18 inch Matte Black Pendant, Matte Black Pendant, Black Pendant, Pendant
Quoizel PCAZR2818MBK Azure LED 18.5 inch Matte Black Pendant Ceiling Light, Large
Quoizel PCAZR2818MBK Matte Black Azure 19" Wide Pendant - LightingDirect.com
File Info : application/pdf, 3 Pages, 215.60KB
DocumentDocumentINSTALLATION GUIDE FOR PCAZR2818MBK and PCAZR1718MBK SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, install or operate the product. WARNING · RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box. CAUTION · For your safety, read instructions completely before beginning installation. · If in doubt about electrical installation, consult a licensed electrician. TOOLS REQUIRED Released Date: 2024-01-09 Ratings 120Vac, 60Hz Model No. Wattage PCAZR2818MBK 18W PCAZR1718MBK 18W CARE AND MAINTENANCE · Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish. If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00am - 5:00pm EST), or visit us on-line at www.quoizel.com. PACKAGE CONTENTS B 12"L Rod x2 D Coupling x 1 G Center Rod x 1 Ceiling Canopy A x1 6"L Rod C x2 MOUNTING HARDWARE E Curved Plate x 1 F Socket Assembly x 1 Crossbar AA x 1 Mounting Screw BB x 2 P3 Wire Connector CC x 5 Outlet Box Screw DD x 2 - 1 of 3 - INSTALLATION OPTION 1: PENDANT - PCAZR2818MBK 1 Install Socket Assembly to Curved Plate 2 Install Rods Optional Rods: 8 Feet Ceiling: (1) 6"L Rod + (1) 12"L Rod. 9 Feet Ceiling: (1) 6"L Rod + (2) 12"L Rods. 10 Feet Ceiling: (2) 6"L Rods + (2) 12"L Rods. 3 Tighten hex nut inside of the Ceiling Canopy 4 Install Ceiling Canopy to Upper Rod 5 Connect Fixture Wires to Driver Red wire from driver identified with the label "LED +" Red wire from fixture identified with the label "LED +" Black wire from driver identified with the label "LED -" Black wire from fixture identified with the label "LED -" 6 Install Crossbar Outlet Box 7 Wiring 8 Install Ceiling Canopy to Crossbar White wire from supply Black (or red) wire from supply White from driver Black from driver Ground wire from supply Ground wire from fixture Green ground screw Swivel 90Degree For angled ceilings, Swivel opening towards wall. Your installation is now complete! Restore electricity and save this sheet for future reference. - 2 of 3 - IMPORTANT: This CONVERTIBLE fixture can be mounted as pendant light or semi-flush light. DO NOT CUT SUPPLY WIRES if you intend to use it as pendant light. OPTION 2: SEMI-FLUSH - PCAZR1718MBK * Set aside (2) 6"L Rods and (2) 12"L Rods, swivel since they are not required for the semi-flush installation. 1 Install Socket Assembly to Curved Plate 2 Remove Swivel 3 Install Ceiling Canopy * Cut the supply wires leaving approximately 8" of wire extending from the ceiling canopy after assembly. Supply Wire Set aside Swivel 4 Connect Fixture Wires to Driver Red wire from driver identified with the label "LED +" Red wire from fixture identified with the label "LED +" Black wire from driver identified with the label "LED -" Black wire from fixture identified with the label "LED -" 6 Wiring White wire from supply Black (or red) wire from supply White from driver Black from driver Ground wire from supply Ground wire from fixture Green ground screw 5 Install Crossbar Outlet Box 7 Install Ceiling Canopy to Crossbar Your installation is now complete! Restore electricity and save this sheet for future reference. - 3 of 3 -