mailto:sales@thorfiber.com
HD video over coax and IP :: ThorbroadcastHD video over coax and IP :: Thorbroadcast
User Manual for THOR models including: F-12G-A-D-T Data Tally Fiber Optic Transceivers, F-12G-A-D-T, Data Tally Fiber Optic Transceivers, Tally Fiber Optic Transceivers, Fiber Optic Transceivers, Optic Transceivers, Transceivers
User's manuals
File Info : application/pdf, 10 Pages, 1.35MB
DocumentDocumentUser Manual SD/HD/3G/12G + Analog Audio + RS Data + Tally Fiber Optic F-12G-A-D-T/R-TX/RX F-12G-A-D-T/R-TX/RX SD/HD/3G/12G + Analog Audio + RS Data + Tally Fiber Optic Overview 12G-SDI UHD multi-function fiber optic transmitter and receiver sets are now combining multiple effective inputs and outputs to follow client demand of the market. Through a single optical fiber these units can transmit one channel of bidirectional 12G-SDI video, bidirectional 3.5 stereo audio, and bidirectional RS232/485/422 serial port data/bidirectional tally signal with CWDM technology, All this is completed with zero delay and no compression, of high-quality signal extension of 10km. Easy to use plug and play devices. The set comes with the transmitter, receiver, and both power supplies. ST/PC connectors are standard. Effective in both hot and cold weather and of course electromagnetic averse. Application 1. SMPTE compatible SDI for easy distribution of video with audio/RS Data/Tally 2. UHDTV/4K/8K/HDTV/SDTV video 3. Stadium, education, house of worship, private, military Ordering information S.no Product Configuration 1 channel bidirectional 12GSDI video with loop output;1 channel bidirectional 3.5 audio;1 channel bidirectional 1 tally;1 channel bidirectional RS485 datahalf-duplex;1 channel bidirectional RS232 datafull-duplex 1 channel bidirectional 12GSDI video with loop output;1 2 channel bidirectional 3.5 audio;1 channel bidirectional tally;2 channel bidirectional RS485 datahalf-duplex 1 channel bidirectional 12GSDI video with loop output;1 3 channel bidirectional 3.5 audio;1 channel bidirectional tally;1 channel bidirectional RS422 datafull-duplex 1 channel bidirectional 12GSDI video with loop output;1 4 channel bidirectional 3.5 audio;1 channel bidirectional tally;2 channel bidirectional RS232 datafull-duplex Fiber Connector LC LC LC LC Features 1. One channel bidirectional 12G-SDI video transmission, transmitter has video loop-out HD audio and video. 2. SDI Video: ST-2082-1 (12G),ST-2081-1 (6G),ST-424 (3G),ST-292 (HD) and ST-259 (SD);compatible with DVB-ASI and AES10 (MADI) Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 2 / 10 F-12G-A-D-T/R-TX/RX 3.Both transmitter and receiver have reclock functionality 4.Signal input has automatic cable equalization (EQ) function, output has drive (CD) function; 5. One channel bidirectional 3.5 stereo audio independent transmission. 6. RS232/485/422 serial port data transparent transmission. 7. One channel bidirectional tally signal 8. Single mode Fiber 10km transmission distance. 9. Plug and play, without debugging; power supplies included Specifications Fiber parameter Wavelength Fiber type Transmitter power Receiver sensitivity Fiber connector Optical module parameter Video parameter Protocol standard SMPTE rate Support standard (digital video format) EQ mode cable transmission distance Signal amplitude Impedance Connector Audio parameter Sampling frequency Sampling depth Dynamic bandwidth Total harmonic distortion (THD) 1270/1330/1470/1490nm 9/125um single-mode 0~-3dB -10dB LC Single fiber single mode 10km SMPTE ST-2082 270Mbit/s,1.48Gbit/s,2.97Gbit/s,5.94Gbit/s, 11.88Gbit/s SMPIE 259M SD-SDI 480i576i SMPIE 344M ED-SDI 480P, 576P SMPIE 292M HD-SDI 720P, 1080i SMPIE 424M 3G-SDI 1080P60Hz SMPIE ST-2081 6G-SDI 2160P30Hz SMPIE ST-2082 12G-SDI 2160P60Hz 11.88Gbps at 75m 5.94Gbps at 120m 2.97Gbps at 200m 1.485Gbps at 300m 270Mbps at 600m 800mV±10% 75 The BNC meet the IEC169-8 standard 48K 24bit 96db -88db Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 3 / 10 F-12G-A-D-T/R-TX/RX Signal to noise ratioSNR Audio input/output impedance Signal level Physical interface Signal type Data parameter Standard Physical interface Baud rate RS232 RS485 RS422 RS485 circuit parameter RS-485 pull-up resistance/pull-down resistance RS-485 terminal resistance Tally signal parameter Level type Input level range Output level parameter Default state Physical interface Mechanical parameter The shell metal Product size Installation method Environment Working temperature Storage temperature Relative humidity MTBF 96db 600 VPP 3.5V 3.5mm stereo audio socket Stereo audio Compliance with the EIA RS-232,RS-485,RS-422 standard Industrial terminal/3.81mm 50bps to 115200 kbps (support non-standard baud rates) 3-wire(RXD,TXD,GND),full-duplex, point to point communication 2-wire (A, B), half-duplex, point to multi-master-slave communication 4-wire,full-duplex 4.7 k,4.7 k N/A,120 and 120 k TTL5V/LVTTL(3.3V) 3.3V~12V 0V or 3.3V No-voltage output (0V) Industrial terminal / 3.81mm Aluminum alloy 116*128*30mm Desktop type -20°C ~+75°C -40°C ~+85°C 5 to 95% (non-condensing) > 10,0000 hours Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 4 / 10 F-12G-A-D-T/R-TX/RX SDI OUT SDI IN SDI LOOP AUDIO IN AUDIO OUT RS232 PC 12G SDI signal output 12G SDI signal input 12G SDI signal loop out 3.5mm audio input 3.5mm audio output 1 GND Ground wire 2 RS232 IN Input 3 RS232 OUT Output Host USB Front panel Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 5 / 10 F-12G-A-D-T/R-TX/RX Indicator status Name SDI OUT SDI IN D1 D2 D3 D4 Analysis 12G-SDI signal output 12G-SDI signal input DATA 1 DATA 2 TALLY 1 TALLY 2 Status Description Light onvideo signal Light offno video signal Light onvideo signal Light offno video signal Blinking:data signal Off: no data signal Blinking:data signal Off: no data signal Blinking:data signal Off: no data signal Blinking:data signal Off: no data signal Back panel Indicator status Name Analysis POWER Power FIBER Fiber Status Description On: The device is powered on Off: The device is powered off Light onfiber signal Light offno fiber signal Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 6 / 10 Receiver printed / indicator description F-12G-A-D-T/R-TX/RX SDI OUT SDI IN SDI LOOP AUDIO IN AUDIO OUT RS232 PC 12G SDI signal output 12G SDI signal input 12G SDI signal loop out 3.5mm audio input 3.5mm audio output 1 GND Ground wire 2 RS232 IN Input 3 RS232 OUT Output Host USB Front panel Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 7 / 10 F-12G-A-D-T/R-TX/RX Indicator status Name SDI OUT SDI IN D1 D2 D3 D4 Analysis 12G-SDI signal output 12G-SDI signal input DATA 1 DATA 2 TALLY 1 TALLY 2 Status Description Light onvideo signal Light offno video signal Light onvideo signal Light offno video signal Blinking:data signal Off: no data signal Blinking:data signal Off: no data signal Blinking:data signal Off: no data signal Blinking:data signal Off: no data signal Back panel Indicator status Name Analysis POWER Power FIBER Fiber Status Description On: The device is powered on Off: The device is powered off Light onfiber signal Light offno fiber signal Packing List S.no Name 1 Transmitter 2 Receiver 3 9-pin phoenix terminal male (fixed to the device) 4 User's manual 5 Warranty card 6 Certificate of quality Unit PCS PCS PCS PCS PCS PCS Quantity 1 1 2 1 1 1 Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 8 / 10 Connection Diagram F-12G-A-D-T/R-TX/RX Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 9 / 10 F-12G-A-D-T/R-TX/RX The connection diagram is for reference only! Attention It is recommended to use the short optical fiber link for the first time to ensure that all the functions of the equipment are normal, and then connect longer distance fiber. The signal of fiber optic converter can be output to a power amplifier, but the audio source of the power amplifier can't output the audio source signal to the fiber optic converter, otherwise the equipment will be terminated. Troubleshooting indicators 1: Power indicator is abnormal (POWER); Answer: Check whether the power adapter meets the equipment requirements or the power adapter fails Whether the socket is not tight or loose 2: Fiber indicator is abnormal (FIBER); Answer: Check whether the optical fiber interface is loose and not plugged in Check whether the optical fiber is too much attenuated 3: Video indicator is abnormal (VIDEO); Answer: Check the signal source Replace the video cable 4. Data indicator is abnormal (DATA); Answer: Check the COM port, whether the baud rate is consistent Check whether the serial port cable is connected backwards Attention Lightning protection, static electricity and grounding: It is recommended that when install the device, YOU MUST GROUND THE UNITS. Strong static electricity will damage the optical device and data chip in the equipment. It is recommended that when you plug/unplug the data port of the optical converter, please disconnect the power supply of the optical converter first. Fiber and optic components: Be careful when plugging the optical fiber in as optical components of the optical converter are very fragile, and you should avoid causing damage to the optical components. It should be noted that the light source produced by the optical components of the optical converter will DAMAGE your eyes, so do not have direct eye contact with the optical components of the optical converter. If you need to detect the optical power of the optical converter, please use an optical power meter. Equipment and installation procedures: 1Optical fiber installation: please carefully insert the optical fiber into the optical fiber interface of the optical terminal after confirming that the optical fiber link meets the installation requirements. 2Power amplified audio signal cannot be directly given to the transmitter, which will lead to the burning machine out. Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com 10 / 10